# EMC controller parameters for generic controller. Make these what you need
# for your system.
# General note: Comments can either be preceded with a # or ; - either is
# acceptable, although # is in keeping with most linux config files.
# General section -------------------------------------------------------------
[EMC]
# Version of this INI file
VERSION = $Revision: 1.6 $
# Name of machine, for use with display, etc.
MACHINE = EMC-EDM
# Name of NML file to use, default is emc.nml
NML_FILE = emc.nml
# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
#DEBUG = 0x00000003
#DEBUG = 0x00000007
DEBUG = 0x7FFFFFFF
# Sections for display options ------------------------------------------------
[DISPLAY]
# Name of display program, e.g., tkemc
DISPLAY = tkemc
#DISPLAY = axis
# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME = 0.0500
# Path to help file
HELP_FILE = doc/help.txt
# Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET = RELATIVE
# Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK = ACTUAL
# Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE = 1.5
# Prefix to be used
PROGRAM_PREFIX = programs/
# Introductory graphic
INTRO_GRAPHIC = emc2.gif
INTRO_TIME = 5
# Task controller section -----------------------------------------------------
[TASK]
# Name of task controller program, e.g., milltask
TASK = milltask
# Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME = 0.010
# Part program interpreter section --------------------------------------------
[RS274NGC]
RS274NGC_STARTUP_CODE=M52P1
# File containing interpreter variables
PARAMETER_FILE = motenc.var
# Motion control section ------------------------------------------------------
[EMCMOT]
EMCMOT = motmod
# Key for real OS shared memory, e.g., for simulated motion
SHMEM_KEY = 101
# Timeout for comm to emcmot, in seconds
COMM_TIMEOUT = 1.0
# Interval between tries to emcmot, in seconds
COMM_WAIT = 0.010
# Base task period, in nanoseconds - this is the fastest thread in the machine
BASE_PERIOD = 50000
# Servo task period, in nanoseconds - will be rounded to an integer multiple
# of BASE_PERIOD
SERVO_PERIOD = 1000000
# Trajectory Planner task period, in nanoseconds - will be rounded to an
# integer multiple of SERVO_PERIOD
TRAJ_PERIOD = 10000000
# Hardware Abstraction Layer section --------------------------------------------------
[HAL]
# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.
#
# NOTE: Once the new version of inivar (with the -num option)
# is ported over to the main branch, the HALFILEMAX and HALFILEn
# cruft can go away, replaced by as many HALFILE lines as are
# needed for any particular configuration.
# list of hal config files to run through halcmd
# files are executed in order, HALFILE1 to HALFILE<HALFILEMAX>
HALFILE = core_servo.hal
HALFILE = motenc_motion.hal
HALFILE = motenc_io.hal
# list of halcmd commands to execute
# commands are executed in order, HALCMD1 to HALCMD<HALCMDMAX>
#HALCMD = save neta
# Trajectory planner section --------------------------------------------------
[TRAJ]
AXES = 2
# COORDINATES = X Y Z R P W
COORDINATES = X Y
HOME = 0 0
LINEAR_UNITS = inch
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 0.0167
MAX_VELOCITY = .25
DEFAULT_ACCELERATION = 1.0
MAX_ACCELERATION = 1.0
PROBE_INDEX = 0
PROBE_POLARITY = 1
# Axes sections ---------------------------------------------------------------
# First axis
[AXIS_0]
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = .25
MAX_ACCELERATION = 1.0
BACKLASH = 0.000
INPUT_SCALE = 40000.0 0
OUTPUT_SCALE = 1.000 0.000
OUTPUT_OFFSET = -0.000050
MIN_LIMIT = -4.5
MAX_LIMIT = 4.5
FERROR = 3.000
MIN_FERROR = 0.9
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = -.10
HOME_LATCH_VEL = 0.05
HOME_USE_INDEX = YES
HOME_IGNORE_LIMITS = NO
MAX_OUTPUT = 10.0
# PID tuning params
DEADBAND = 0.000015
P = 100.0
I = 0.000
D = 0.000
FF0 = 0.000
FF1 = 0.000
BIAS = 0.000
# Second axis
[AXIS_1]
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = .25
MAX_ACCELERATION = 1.0
BACKLASH = 0.000
INPUT_SCALE = 40000.0 0
OUTPUT_SCALE = 10.000 0.000
OUTPUT_OFFSET = 0.00005
MIN_LIMIT = -4.0
MAX_LIMIT = 4.0
FERROR = 3.0
MIN_FERROR = 0.9
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = -.10
HOME_LATCH_VEL = 0.05
HOME_USE_INDEX = YES
HOME_IGNORE_LIMITS = NO
MAX_OUTPUT = 10.0
# PID tuning params
DEADBAND = 0.000015
P = 100.0
I = 0.000
D = 0.000
FF0 = 0.000
FF1 = 0.000
BIAS = 0.000
# section for main IO controller parameters -----------------------------------
[EMCIO]
# Name of IO controller program, e.g., io
EMCIO = io
# cycle time, in seconds
CYCLE_TIME = 0.100
# tool table file
TOOL_TABLE = motenc.tbl