rendered paste body[ 0.323469] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold[ 0.323675] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300[ 0.323756] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit][ 0.323908] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold[ 0.324103] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400[ 0.324261] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold[ 0.324388] pci 0000:00:1c.0: System wakeup disabled by ACPI[ 0.324543] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400[ 0.324709] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold[ 0.324822] pci 0000:00:1c.1: System wakeup disabled by ACPI[ 0.324988] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320[ 0.325077] pci 0000:00:1d.0: reg 0x10: [mem 0xc0618000-0xc06183ff][ 0.325243] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold[ 0.325375] pci 0000:00:1d.0: System wakeup disabled by ACPI[ 0.325532] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100[ 0.325840] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601[ 0.325928] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f][ 0.325999] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097][ 0.326070] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087][ 0.326139] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093][ 0.326211] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f][ 0.326284] pci 0000:00:1f.2: reg 0x24: [mem 0xc0617000-0xc06177ff][ 0.326407] pci 0000:00:1f.2: PME# supported from D3hot[ 0.326596] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500[ 0.326683] pci 0000:00:1f.3: reg 0x10: [mem 0xc0615000-0xc06150ff 64bit][ 0.326771] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f][ 0.327148] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000[ 0.327284] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff][ 0.327477] pci 0000:01:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref][ 0.327619] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref][ 0.328113] pci 0000:01:00.0: supports D1 D2[ 0.328173] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold[ 0.329774] pci 0000:00:1c.0: PCI bridge to [bus 01][ 0.329839] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff][ 0.329911] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref][ 0.330132] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000[ 0.330250] pci 0000:02:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit][ 0.330439] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref][ 0.330670] pci 0000:02:00.0: supports D1 D2[ 0.330735] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold[ 0.332789] pci 0000:00:1c.1: PCI bridge to [bus 02][ 0.332858] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff][ 0.332953] pci_bus 0000:00: on NUMA node 0[ 0.396138] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7[ 0.396819] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)[ 0.397457] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.[ 0.398183] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)[ 0.398818] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.[ 0.399542] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7[ 0.400223] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)[ 0.400860] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)[ 0.401563] ACPI: Enabled 5 GPEs in block 00 to 3F[ 0.401761] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62[ 0.401994] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none[ 0.402070] vgaarb: loaded[ 0.402127] vgaarb: bridge control possible 0000:00:02.0[ 0.402386] SCSI subsystem initialized[ 0.402646] PCI: Using ACPI for IRQ routing[ 0.410352] PCI: pci_cache_line_size set to 64 bytes[ 0.410474] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff][ 0.410539] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff][ 0.410602] e820: reserve RAM buffer [mem 0x9ffb0000-0x9fffffff][ 0.410665] e820: reserve RAM buffer [mem 0xaa3bf000-0xabffffff][ 0.410727] e820: reserve RAM buffer [mem 0xab000000-0xabffffff][ 0.410791] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff][ 0.411191] Switched to clocksource hpet[ 0.417573] pnp: PnP ACPI init[ 0.417646] ACPI: bus type PNP registered[ 0.417732] pnp 00:00: [dma 4][ 0.419262] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)[ 0.419406] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)[ 0.419636] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)[ 0.419789] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)[ 0.419958] system 00:04: [io 0x0680-0x069f] has been reserved[ 0.420023] system 00:04: [io 0x1000-0x100f] has been reserved[ 0.420087] system 00:04: [io 0xffff] has been reserved[ 0.420149] system 00:04: [io 0xffff] has been reserved[ 0.420227] system 00:04: [io 0x0400-0x0453] could not be reserved[ 0.420296] system 00:04: [io 0x0458-0x047f] has been reserved[ 0.420361] system 00:04: [io 0x0500-0x057f] has been reserved[ 0.420424] system 00:04: [io 0x164e-0x164f] has been reserved[ 0.420487] system 00:04: [io 0xfd60-0xfd63] has been reserved[ 0.420553] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.420701] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)[ 0.420878] system 00:06: [io 0x0454-0x0457] has been reserved[ 0.420944] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)[ 0.421112] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)[ 0.421280] pnp 00:08: Plug and Play ACPI device, IDs DLL0597 PNP0f13 (active)[ 0.484421] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved[ 0.484487] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved[ 0.484552] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved[ 0.484617] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved[ 0.484683] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved[ 0.484748] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved[ 0.484814] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved[ 0.484879] system 00:09: [mem 0xff000000-0xff000fff] has been reserved[ 0.484943] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved[ 0.485010] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved[ 0.485074] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved[ 0.485141] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)[ 0.485620] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved[ 0.485687] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved[ 0.485752] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)[ 0.485837] pnp: PnP ACPI: found 11 devices[ 0.485897] ACPI: bus type PNP unregistered[ 0.490532] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref][ 0.490641] pci 0000:00:1c.1: BAR 9: assigned [mem 0xafb00000-0xafbfffff pref][ 0.490705] pci 0000:00:1c.0: PCI bridge to [bus 01][ 0.490768] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff][ 0.490839] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref][ 0.490912] pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb0ffff pref][ 0.490979] pci 0000:00:1c.1: PCI bridge to [bus 02][ 0.491045] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff][ 0.491114] pci 0000:00:1c.1: bridge window [mem 0xafb00000-0xafbfffff pref][ 0.491195] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7][ 0.491259] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff][ 0.491321] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff][ 0.491386] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff][ 0.491450] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff][ 0.491513] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref][ 0.491578] pci_bus 0000:02: resource 1 [mem 0xc0500000-0xc05fffff][ 0.491643] pci_bus 0000:02: resource 2 [mem 0xafb00000-0xafbfffff pref][ 0.491778] NET: Registered protocol family 2[ 0.492057] TCP established hash table entries: 32768 (order: 6, 262144 bytes)[ 0.492200] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)[ 0.492347] TCP: Hash tables configured (established 32768 bind 32768)[ 0.492430] TCP: reno registered[ 0.492488] UDP hash table entries: 2048 (order: 4, 65536 bytes)[ 0.492563] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)[ 0.492716] NET: Registered protocol family 1[ 0.492789] pci 0000:00:02.0: Boot video device[ 0.494204] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.[ 0.494272] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.[ 0.516307] PCI: CLS 64 bytes, default 64[ 0.516418] Trying to unpack rootfs image as initramfs...[ 1.104958] Freeing initrd memory: 3696K (ffff88001fc54000 - ffff88001fff0000)[ 1.105050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)[ 1.105116] software IO TLB [mem 0xa63bf000-0xaa3bf000] (64MB) mapped at [ffff8800a63bf000-ffff8800aa3befff][ 1.105278] Simple Boot Flag at 0x44 set to 0x1[ 1.105584] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer[ 1.106570] futex hash table entries: 1024 (order: 4, 65536 bytes)[ 1.106696] audit: initializing netlink subsys (disabled)[ 1.106774] audit: type=2000 audit(1409418898.085:1): initialized[ 1.107624] VFS: Disk quotas dquot_6.5.2[ 1.107711] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 1.108038] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 1.108143] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled[ 1.108580] ocfs2: Registered cluster interface o2cb[ 1.108686] OCFS2 User DLM kernel interface loaded[ 1.109178] GFS2 installed[ 1.109241] msgmni has been set to 7666[ 1.109595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)[ 1.109663] io scheduler noop registered[ 1.109723] io scheduler deadline registered[ 1.109800] io scheduler cfq registered (default)[ 1.110565] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled[ 1.111419] Linux agpgart interface v0.103[ 1.111678] intel_idle: MWAIT substates: 0x21120[ 1.111739] intel_idle: v0.4 model 0x3A[ 1.111798] intel_idle: lapic_timer_reliable_states 0xffffffff[ 1.112156] [drm] Initialized drm 1.1.0 20060810[ 1.115314] brd: module loaded[ 1.117037] loop: module loaded[ 1.117261] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded[ 1.117332] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control[ 1.117617] r8169 0000:01:00.0: irq 40 for MSI/MSI-X[ 1.117960] r8169 0000:01:00.0 eth0: RTL8105e at 0xffffc9000000c000, d4:be:d9:73:15:f9, XID 00c00000 IRQ 40[ 1.118259] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12[ 1.137887] serio: i8042 KBD port at 0x60,0x64 irq 1[ 1.138006] serio: i8042 AUX port at 0x60,0x64 irq 12[ 1.138484] mousedev: PS/2 mouse device common for all mice[ 1.138744] rtc_cmos 00:05: RTC can wake from S4[ 1.139027] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0[ 1.139121] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs[ 1.139271] device-mapper: uevent: version 1.0.3[ 1.139447] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com[ 1.139595] device-mapper: multipath: version 1.6.0 loaded[ 1.139658] device-mapper: multipath round-robin: version 1.0.0 loaded[ 1.139819] hidraw: raw HID events driver (C) Jiri Kosina[ 1.140537] TCP: cubic registered[ 1.140597] NET: Registered protocol family 17[ 1.141422] registered taskstats version 1[ 1.141895] rtc_cmos 00:05: setting system clock to 2014-08-30 17:14:58 UTC (1409418898)[ 1.142078] PM: Checking hibernation image partition /dev/sda2[ 1.160005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0[ 2.065384] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2382, fw id: 1238635[ 2.106733] tsc: Refined TSC clocksource calibration: 1795.920 MHz[ 2.139786] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2[ 2.144757] PM: Hibernation image not present or could not be loaded.[ 2.145096] Freeing unused kernel memory: 828K (ffffffff81720000 - ffffffff817ef000)[ 2.541390] libata version 3.00 loaded.[ 2.602236] ahci 0000:00:1f.2: version 3.0[ 2.602430] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X[ 2.612588] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode[ 2.612594] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 2.617426] scsi0 : ahci[ 2.617768] scsi1 : ahci[ 2.618047] scsi2 : ahci[ 2.618319] scsi3 : ahci[ 2.618604] scsi4 : ahci[ 2.618880] scsi5 : ahci[ 2.619091] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 41[ 2.619094] ata2: DUMMY[ 2.619098] ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 41[ 2.619100] ata4: DUMMY[ 2.619101] ata5: DUMMY[ 2.619103] ata6: DUMMY[ 2.923462] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[ 2.925476] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)[ 2.926825] ata1.00: ATA-8: WDC WD7500BPVT-75A1YT0, 01.01A01, max UDMA/133[ 2.926829] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA[ 2.928486] ata3.00: ATAPI: TSSTcorp DVD+/-RW SU-208BB, D300, max UDMA/100[ 2.928889] ata1.00: configured for UDMA/133[ 2.929100] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-7 01.0 PQ: 0 ANSI: 5[ 2.929898] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)[ 2.929903] sd 0:0:0:0: [sda] 4096-byte physical blocks[ 2.929967] sd 0:0:0:0: [sda] Write Protect is off[ 2.929971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 2.929999] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 2.932618] ata3.00: configured for UDMA/100[ 2.941615] scsi 2:0:0:0: CD-ROM TSSTcorp DVD+-RW SU-208BB D300 PQ: 0 ANSI: 5[ 2.943124] sda: sda1 sda2 sda3[ 2.943943] sd 0:0:0:0: [sda] Attached SCSI disk[ 2.963912] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray[ 2.963914] cdrom: Uniform CD-ROM driver Revision: 3.20[ 2.964322] sr 2:0:0:0: Attached scsi CD-ROM sr0[ 2.995129] sd 0:0:0:0: Attached scsi generic sg0 type 0[ 2.995280] sr 2:0:0:0: Attached scsi generic sg1 type 5[ 3.057235] scsi: <fdomain> Detection failed (no card)[ 3.064132] GDT-HA: Storage RAID Controller Driver. Version: 3.05[ 3.106417] Switched to clocksource tsc[ 3.197192] 3ware Storage Controller device driver for Linux v1.26.02.003.[ 3.200157] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.[ 3.227808] Adaptec aacraid driver 1.2-0[30200]-ms[ 3.233764] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)[ 3.234230] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)[ 3.239608] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013[ 3.245308] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k.[ 3.255943] Emulex LightPulse Fibre Channel SCSI driver 8.3.43[ 3.255945] Copyright(c) 2004-2013 Emulex. All rights reserved.[ 3.263332] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded[ 3.274165] ACPI: bus type USB registered[ 3.274343] usbcore: registered new interface driver usbfs[ 3.274432] usbcore: registered new interface driver hub[ 3.274537] usbcore: registered new device driver usb[ 3.274964] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 3.275229] ehci-pci: EHCI PCI platform driver[ 3.275420] ehci-pci 0000:00:1a.0: EHCI Host Controller[ 3.275428] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1[ 3.275445] ehci-pci 0000:00:1a.0: debug port 2[ 3.279351] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported[ 3.279375] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000[ 3.285305] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00[ 3.285380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 3.285383] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 3.285385] usb usb1: Product: EHCI Host Controller[ 3.285387] usb usb1: Manufacturer: Linux 3.14.14-gentoo ehci_hcd[ 3.285389] usb usb1: SerialNumber: 0000:00:1a.0[ 3.286069] hub 1-0:1.0: USB hub found[ 3.286101] hub 1-0:1.0: 2 ports detected[ 3.286507] ehci-pci 0000:00:1d.0: EHCI Host Controller[ 3.286516] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2[ 3.286532] ehci-pci 0000:00:1d.0: debug port 2[ 3.290424] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported[ 3.290445] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000[ 3.296321] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00[ 3.296367] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002[ 3.296370] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 3.296372] usb usb2: Product: EHCI Host Controller[ 3.296374] usb usb2: Manufacturer: Linux 3.14.14-gentoo ehci_hcd[ 3.296376] usb usb2: SerialNumber: 0000:00:1d.0[ 3.296748] hub 2-0:1.0: USB hub found[ 3.296761] hub 2-0:1.0: 2 ports detected[ 3.317752] usbcore: registered new interface driver usb-storage[ 3.320727] uhci_hcd: USB Universal Host Controller Interface driver[ 3.323782] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 3.337025] usbcore: registered new interface driver usbhid[ 3.337028] usbhid: USB HID core driver[ 3.551183] JFS: nTxBlock = 8192, nTxLock = 65536[ 3.557960] RPC: Registered named UNIX socket transport module.[ 3.557962] RPC: Registered udp transport module.[ 3.557963] RPC: Registered tcp transport module.[ 3.557964] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 3.574225] fuse init (API version 7.22)[ 3.588212] usb 1-1: new high-speed USB device number 2 using ehci-pci[ 3.590156] Loading iSCSI transport class v2.0-870.[ 3.702540] usb 1-1: New USB device found, idVendor=8087, idProduct=0024[ 3.702544] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 3.703038] hub 1-1:1.0: USB hub found[ 3.703172] hub 1-1:1.0: 6 ports detected[ 3.738067] random: lvm urandom read with 22 bits of entropy available[ 3.806149] usb 2-1: new high-speed USB device number 2 using ehci-pci[ 3.806251] bio: create slab <bio-1> at 1[ 3.817237] PM: Starting manual resume from disk[ 3.817240] PM: Hibernation image partition 8:2 present[ 3.817241] PM: Looking for hibernation image.[ 3.817416] PM: Image not found (code -22)[ 3.817418] PM: Hibernation image not present or could not be loaded.[ 3.920490] usb 2-1: New USB device found, idVendor=8087, idProduct=0024[ 3.920495] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 3.921134] hub 2-1:1.0: USB hub found[ 3.921240] hub 2-1:1.0: 6 ports detected[ 3.995210] usb 1-1.1: new full-speed USB device number 3 using ehci-pci[ 4.082161] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=e004[ 4.082165] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 4.082167] usb 1-1.1: Product: Bluetooth USB Host Controller[ 4.082169] usb 1-1.1: Manufacturer: Atheros Communications[ 4.082171] usb 1-1.1: SerialNumber: Alaska Day 2006[ 4.156177] usb 1-1.3: new high-speed USB device number 4 using ehci-pci[ 4.241878] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129[ 4.241882] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 4.241884] usb 1-1.3: Product: USB2.0-CRW[ 4.241886] usb 1-1.3: Manufacturer: Generic[ 4.241887] usb 1-1.3: SerialNumber: 20100201396000000[ 4.316094] usb 1-1.4: new high-speed USB device number 5 using ehci-pci[ 4.467723] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=64ad[ 4.467727] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0[ 4.467729] usb 1-1.4: Product: Laptop_Integrated_Webcam_HD[ 4.467731] usb 1-1.4: Manufacturer: CN0Y3PX8724872AGA41DA00[ 23.669412] random: nonblocking pool is initialized[ 24.927983] EXT3-fs (dm-0): error: couldn't mount because of unsupported optional features (240)[ 24.928137] EXT2-fs (dm-0): error: couldn't mount because of unsupported optional features (240)[ 24.946832] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)[ 38.469910] systemd-udevd[3485]: starting version 215[ 39.032485] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared[ 39.032563] ACPI: AC Adapter [ACAD] (on-line)[ 39.038105] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input3[ 39.038167] ACPI: Power Button [PWRB][ 39.038256] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4[ 39.038342] ACPI: Lid Switch [LID0][ 39.038478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5[ 39.038559] ACPI: Power Button [PWRF][ 39.044589] input: PC Speaker as /devices/platform/pcspkr/input/input6[ 39.095820] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X[ 39.108557] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)[ 39.108568] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver[ 39.290126] [drm] Memory usable by graphics device = 2048M[ 39.295878] i915 0000:00:02.0: irq 43 for MSI/MSI-X[ 39.295887] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 39.295888] [drm] Driver supports precise vblank timestamp query.[ 39.295994] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem[ 39.372909] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared[ 39.372918] ACPI: Battery Slot [BAT1] (battery present)[ 39.373900] systemd-udevd[3508]: renamed network interface eth0 to enp1s0[ 39.379339] hda_codec: ALC3221: SKU not ready 0x598301f0[ 39.382823] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2[ 39.392001] fbcon: inteldrmfb (fb0) is primary device[ 39.462386] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15[ 39.462537] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15[ 39.462552] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15[ 39.462569] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15[ 39.462648] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba[ 39.480160] cfg80211: Calling CRDA to update world regulatory domain[ 39.552642] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)[ 39.729493] ath: phy0: ASPM enabled: 0x43[ 39.729494] ath: EEPROM regdomain: 0x60[ 39.729495] ath: EEPROM indicates we should expect a direct regpair map[ 39.729496] ath: Country alpha2 being used: 00[ 39.729497] ath: Regpair used: 0x60[ 39.760611] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'[ 39.760866] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010d00000, irq=17[ 39.880737] systemd-udevd[3517]: renamed network interface wlan0 to wlp2s0[ 40.067143] Console: switching to colour frame buffer device 170x48[ 40.071779] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device[ 40.071782] i915 0000:00:02.0: registered panic notifier[ 40.109369] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)[ 40.109477] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7[ 40.109623] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0[ 40.706833] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off[ 130.703368] Linux video capture interface: v2.00[ 130.738030] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64ad)[ 130.778868] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8[ 130.779076] usbcore: registered new interface driver uvcvideo[ 130.779079] USB Video Class driver (1.1.1)[ 161.515404] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k [ 162.857754] EXT4-fs (dm-0): re-mounted. Opts: (null)[ 163.095166] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)[ 163.491485] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)[ 163.836436] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)[ 164.091573] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)[ 164.236721] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)[ 164.432915] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)