rendered paste body[ 0.000000] Bootdata ok (command line is root=/dev/hdd1 ro quiet noacpi noapic)
[ 0.000000] Linux version 2.6.17-10-generic (root@king) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 21:16:35 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7b90
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff3040
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff30c0
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000007fff9580
[ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff97c0
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff94c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fff0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000
[ 0.000000] On node 0 totalpages: 515641
[ 0.000000] DMA zone: 2576 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Processors: 2
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 4004000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hdd1 ro quiet noacpi noapic
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Disabling vsyscall due to use of PM timer
[ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 0.000000] time.c: Detected 2010.320 MHz processor.
[ 30.431150] Console: colour VGA+ 80x25
[ 30.432434] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 30.434211] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 30.454907] Memory: 2053624k/2097088k available (2129k kernel code, 43076k reserved, 1424k data, 188k init)
[ 30.531106] Calibrating delay using timer specific routine.. 4023.70 BogoMIPS (lpj=8047403)
[ 30.531165] Security Framework v1.0.0 initialized
[ 30.531173] SELinux: Disabled at boot.
[ 30.531196] Mount-cache hash table entries: 256
[ 30.531351] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 30.531354] CPU: L2 Cache: 512K (64 bytes/line)
[ 30.531357] CPU 0/0(2) -> Node 0 -> Core 0
[ 30.531375] SMP alternatives: switching to UP code
[ 30.531648] checking if image is initramfs... it is
[ 31.024886] Freeing initrd memory: 5746k freed
[ 31.028682] ACPI: Core revision 20060707
[ 31.031044] ACPI: Looking for DSDT ... not found!
[ 31.034932] Using local APIC timer interrupts.
[ 31.084642] result 12564517
[ 31.084644] Detected 12.564 MHz APIC timer.
[ 31.086987] SMP alternatives: switching to SMP code
[ 31.087132] Booting processor 1/2 APIC 0x1
[ 31.097107] Initializing CPU#1
[ 31.098264] spurious 8259A interrupt: IRQ7.
[ 31.174393] Calibrating delay using timer specific routine.. 4026.73 BogoMIPS (lpj=8053474)
[ 31.174400] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 31.174402] CPU: L2 Cache: 512K (64 bytes/line)
[ 31.174405] CPU 1/1(2) -> Node 0 -> Core 1
[ 31.174484] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 31.178400] CPU 1: Syncing TSC to CPU 0.
[ 31.178789] CPU 1: synchronized TSC with CPU 0 (last diff -2 cycles, maxerr 581 cycles)
[ 31.178795] Brought up 2 CPUs
[ 31.178801] testing NMI watchdog ... OK.
[ 32.242667] migration_cost=210
[ 32.242993] NET: Registered protocol family 16
[ 32.243023] ACPI: bus type pci registered
[ 32.246613] PCI: Using MMCONFIG at e0000000
[ 32.246633] PCI: No mmconfig possible on device 0:18
[ 32.253911] ACPI: Interpreter enabled
[ 32.253913] ACPI: Using PIC for interrupt routing
[ 32.254457] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.254460] PCI: Probing PCI hardware (bus 00)
[ 32.259991] PCI: Ignoring BAR0-3 of IDE controller 0000:00:06.0
[ 32.260183] PCI: Transparent bridge - 0000:00:09.0
[ 32.260381] Boot video device is 0000:05:00.0
[ 32.260436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.339435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 32.341589] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.341950] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.342289] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 32.342627] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.342964] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.343307] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 32.343643] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.343983] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 32.344320] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 32.344661] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.344999] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 32.345336] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 32.345678] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.346049] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 32.346395] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 32.346744] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 32.347131] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 32.347509] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 32.347886] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 32.348269] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 32.348561] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 32.348961] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 32.349355] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 32.349750] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 32.350158] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 32.350551] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 32.350948] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 32.351341] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 32.351734] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 32.352137] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 32.352541] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 32.352946] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 32.355846] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.355862] pnp: PnP ACPI init
[ 32.362965] pnp: PnP ACPI: found 12 devices
[ 32.363024] PCI: Using ACPI for IRQ routing
[ 32.363029] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.363135] PCI-DMA: Disabling IOMMU.
[ 32.363615] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[ 32.363618] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 32.363621] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 32.363624] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[ 32.363627] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 32.363630] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 32.363843] PCI: Bridge: 0000:00:09.0
[ 32.363845] IO window: a000-afff
[ 32.363848] MEM window: fde00000-fdefffff
[ 32.363851] PREFETCH window: fdf00000-fdffffff
[ 32.363853] PCI: Bridge: 0000:00:0b.0
[ 32.363855] IO window: 9000-9fff
[ 32.363858] MEM window: fdd00000-fddfffff
[ 32.363860] PREFETCH window: fdc00000-fdcfffff
[ 32.363863] PCI: Bridge: 0000:00:0c.0
[ 32.363865] IO window: 8000-8fff
[ 32.363867] MEM window: fdb00000-fdbfffff
[ 32.363870] PREFETCH window: fda00000-fdafffff
[ 32.363872] PCI: Bridge: 0000:00:0d.0
[ 32.363874] IO window: 7000-7fff
[ 32.363877] MEM window: fd900000-fd9fffff
[ 32.363879] PREFETCH window: fd800000-fd8fffff
[ 32.363885] PCI: Bridge: 0000:00:0e.0
[ 32.363887] IO window: 6000-6fff
[ 32.363890] MEM window: fa000000-fcffffff
[ 32.363893] PREFETCH window: d0000000-dfffffff
[ 32.363900] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 32.363906] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 32.363911] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 32.363916] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 32.363920] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 32.363967] NET: Registered protocol family 2
[ 32.401854] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 32.402303] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 32.404731] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 32.405341] TCP: Hash tables configured (established 262144 bind 65536)
[ 32.405344] TCP reno registered
[ 32.405797] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 32.406193] audit: initializing netlink socket (disabled)
[ 32.406205] audit(1041379233.588:1): initialized
[ 32.406403] VFS: Disk quotas dquot_6.5.1
[ 32.406425] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 32.406478] Initializing Cryptographic API
[ 32.406482] io scheduler noop registered
[ 32.406491] io scheduler anticipatory registered
[ 32.406500] io scheduler deadline registered
[ 32.406521] io scheduler cfq registered (default)
[ 32.407123] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 32.407128] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 32.407140] assign_interrupt_mode Found MSI capability
[ 32.407175] Allocate Port Service[0000:00:0b.0:pcie00]
[ 32.407211] Allocate Port Service[0000:00:0b.0:pcie03]
[ 32.407246] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 32.407249] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 32.407260] assign_interrupt_mode Found MSI capability
[ 32.407275] Allocate Port Service[0000:00:0c.0:pcie00]
[ 32.407307] Allocate Port Service[0000:00:0c.0:pcie03]
[ 32.407338] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 32.407341] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 32.407354] assign_interrupt_mode Found MSI capability
[ 32.407369] Allocate Port Service[0000:00:0d.0:pcie00]
[ 32.407396] Allocate Port Service[0000:00:0d.0:pcie03]
[ 32.407430] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 32.407432] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 32.407444] assign_interrupt_mode Found MSI capability
[ 32.407458] Allocate Port Service[0000:00:0e.0:pcie00]
[ 32.407486] Allocate Port Service[0000:00:0e.0:pcie03]
[ 32.428312] Real Time Clock Driver v1.12ac
[ 32.428354] Linux agpgart interface v0.101 (c) Dave Jones
[ 32.428358] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 32.428471] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.428970] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.429154] mice: PS/2 mouse device common for all mice
[ 32.429684] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 32.429827] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 32.429832] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 32.430001] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 32.430003] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 32.964143] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 32.964474] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 32.964612] TCP bic registered
[ 32.964622] NET: Registered protocol family 1
[ 32.964628] NET: Registered protocol family 8
[ 32.964630] NET: Registered protocol family 20
[ 32.965456] ACPI: (supports S0 S1 S4 S5)
[ 32.965506] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 32.965527] Freeing unused kernel memory: 188k freed
[ 33.003539] input: AT Translated Set 2 keyboard as /class/input/input0
[ 33.034709] Capability LSM initialized
[ 33.062503] ACPI: Fan [FAN] (on)
[ 33.066990] ACPI: Thermal Zone [THRM] (55 C)
[ 33.415685] SCSI subsystem initialized
[ 33.419264] libata version 1.20 loaded.
[ 33.421470] sata_nv 0000:00:07.0: version 0.8
[ 33.421884] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 10
[ 33.421887] PCI: setting IRQ 10 as level-triggered
[ 33.421890] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSID] -> GSI 10 (level, low) -> IRQ 10
[ 33.422091] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 33.422183] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 10
[ 33.422202] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 10
[ 33.628868] ata1: SATA link down (SStatus 0)
[ 33.628871] scsi0 : sata_nv
[ 33.836716] ata2: SATA link down (SStatus 0)
[ 33.836720] scsi1 : sata_nv
[ 33.837649] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
[ 33.837653] PCI: setting IRQ 11 as level-triggered
[ 33.837656] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LFID] -> GSI 11 (level, low) -> IRQ 11
[ 33.837814] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 33.837880] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 11
[ 33.837898] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 11
[ 34.044563] ata3: SATA link up 1.5 Gbps (SStatus 113)
[ 34.212529] ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c68 86:3e21 87:4663 88:407f
[ 34.212534] ata3: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 34.213480] nv_sata: Primary device added
[ 34.213482] nv_sata: Primary device removed
[ 34.213483] nv_sata: Secondary device added
[ 34.213485] nv_sata: Secondary device removed
[ 34.224523] ata3: dev 0 configured for UDMA/133
[ 34.224525] scsi2 : sata_nv
[ 34.432281] ata4: SATA link down (SStatus 0)
[ 34.432285] scsi3 : sata_nv
[ 34.432917] Vendor: ATA Model: Maxtor 6L300S0 Rev: BACE
[ 34.432926] Type: Direct-Access ANSI SCSI revision: 05
[ 34.434761] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[ 34.434783] NFORCE-CK804: chipset revision 243
[ 34.434785] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 34.434789] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[ 34.434792] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller
[ 34.434802] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
[ 34.434813] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
[ 34.434820] Probing IDE interface ide0...
[ 34.444986] SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
[ 34.444999] sda: Write Protect is off
[ 34.445001] sda: Mode Sense: 00 3a 00 00
[ 34.445016] SCSI device sda: drive cache: write back
[ 34.445067] SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
[ 34.445076] sda: Write Protect is off
[ 34.445078] sda: Mode Sense: 00 3a 00 00
[ 34.445092] SCSI device sda: drive cache: write back
[ 34.445096] sda: sda1
[ 34.465603] sd 2:0:0:0: Attached scsi disk sda
[ 34.724141] hda: Maxtor 4R120L0, ATA DISK drive
[ 35.003933] hdb: ST3250823A, ATA DISK drive
[ 35.060254] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 35.062610] Probing IDE interface ide1...
[ 35.463596] hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
[ 35.743392] hdd: WDC WD800JB-00JJC0, ATA DISK drive
[ 35.799650] ide1 at 0x170-0x177,0x376 on irq 15
[ 35.818972] hda: max request size: 128KiB
[ 35.819135] hda: Host Protected Area detected.
[ 35.819136] current capacity is 240119615 sectors (122941 MB)
[ 35.819138] native capacity is 240121728 sectors (122942 MB)
[ 35.881618] hda: Host Protected Area disabled.
[ 35.881624] hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 35.881780] hda: cache flushes supported
[ 35.881829] hda: hda1
[ 35.911849] hdb: max request size: 512KiB
[ 35.911927] hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
[ 35.912009] hdb: cache flushes supported
[ 35.912027] hdb: unknown partition table
[ 35.930843] hdd: max request size: 128KiB
[ 35.930921] hdd: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[ 35.930979] hdd: cache flushes supported
[ 35.930993] hdd: hdd1 hdd2 < hdd5 >
[ 35.976815] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 35.976824] Uniform CD-ROM driver Revision: 3.20
[ 36.431801] usbcore: registered new driver usbfs
[ 36.431824] usbcore: registered new driver hub
[ 36.433308] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
[ 36.433313] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
[ 36.433522] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 36.433528] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 36.433672] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 36.433701] ehci_hcd 0000:00:02.1: debug port 1
[ 36.433704] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 36.433712] ehci_hcd 0000:00:02.1: irq 10, io mem 0xfe02e000
[ 36.433717] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.434077] usb usb1: configuration #1 chosen from 1 choice
[ 36.434096] hub 1-0:1.0: USB hub found
[ 36.434103] hub 1-0:1.0: 10 ports detected
[ 36.439726] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 36.462334] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[ 36.539224] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
[ 36.539229] PCI: setting IRQ 5 as level-triggered
[ 36.539232] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 5 (level, low) -> IRQ 5
[ 36.539440] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 36.539447] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 36.539513] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 36.558753] ohci_hcd 0000:00:02.0: irq 5, io mem 0xfe02f000
[ 36.616871] usb usb2: configuration #1 chosen from 1 choice
[ 36.616982] hub 2-0:1.0: USB hub found
[ 36.616994] hub 2-0:1.0: 10 ports detected
[ 36.723164] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
[ 36.723169] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
[ 36.723175] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 36.723188] forcedeth: using HIGHDMA
[ 37.026383] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 37.246553] eth0: forcedeth.c: subsystem: 01019:1b13 bound to 0000:00:0a.0
[ 37.248286] usb 2-2: configuration #1 chosen from 1 choice
[ 37.257490] usbcore: registered new driver hiddev
[ 37.267265] input: Logitech USB Trackball as /class/input/input1
[ 37.267284] input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:02.0-2
[ 37.267292] usbcore: registered new driver usbhid
[ 37.267295] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 37.320055] Attempting manual resume
[ 37.354099] kjournald starting. Commit interval 5 seconds
[ 37.354112] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.292831] input: PC Speaker as /class/input/input2
[ 44.387814] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.394134] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.419187] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 44.420746] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 44.526841] parport: PnPBIOS parport detected.
[ 44.526905] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 45.033336] nvidia: module license 'NVIDIA' taints kernel.
[ 45.290671] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
[ 45.290676] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
[ 45.290684] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 45.290833] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006
[ 45.313487] NET: Registered protocol family 10
[ 45.313609] lo: Disabled Privacy Extensions
[ 45.313989] IPv6 over IPv4 tunneling driver
[ 45.403352] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 45.413736] ts: Compaq touchscreen protocol output
[ 45.643366] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 3
[ 45.643373] PCI: setting IRQ 3 as level-triggered
[ 45.643376] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 3 (level, low) -> IRQ 3
[ 45.643619] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 45.967706] intel8x0_measure_ac97_clock: measured 58823 usecs
[ 45.967709] intel8x0: clocking to 47058
[ 46.107184] lp0: using parport0 (interrupt-driven).
[ 46.157116] Adding 3004112k swap on /dev/disk/by-uuid/b9e2cab5-8188-4473-93ce-fbc62b55af61. Priority:-1 extents:1 across:3004112k
[ 46.211784] EXT3 FS on hdd1, internal journal
[ 46.410954] ReiserFS: hdb: found reiserfs format "3.6" with standard journal
[ 56.200204] eth1: no IPv6 routers present
[ 58.391780] ReiserFS: hdb: using ordered data mode
[ 58.416618] ReiserFS: hdb: journal params: device hdb, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 58.418054] ReiserFS: hdb: checking transaction log (hdb)
[ 58.506831] ReiserFS: hdb: Using r5 hash to sort names
[ 58.540338] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[ 66.539423] ReiserFS: hda1: using ordered data mode
[ 66.579825] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 66.581259] ReiserFS: hda1: checking transaction log (hda1)
[ 66.670066] ReiserFS: hda1: Using r5 hash to sort names
[ 66.725377] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[ 81.833537] ReiserFS: sda1: using ordered data mode
[ 81.853384] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 81.854840] ReiserFS: sda1: checking transaction log (sda1)
[ 81.956124] ReiserFS: sda1: Using r5 hash to sort names
[ 83.330048] NET: Registered protocol family 17