rendered paste body 6600 @ 2.40GHz stepping 06
[ 43.739957] Total of 2 processors activated (9793.22 BogoMIPS).
[ 43.740106] ExtINT not setup in hardware but reported by MP table
[ 43.740276] ENABLING IO-APIC IRQs
[ 43.740541] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 43.852397] Clock event device pit new caps set: 01
[ 43.852488] Clock event device lapic configured with caps set: 06
[ 43.954459] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 43.974567] Clock event device pit new caps set: 01
[ 43.974568] Clock event device lapic configured with caps set: 06
[ 43.974573] Brought up 2 CPUs
[ 44.184967] migration_cost=32
[ 44.185369] NET: Registered protocol family 16
[ 44.186227] PCI: PCI BIOS revision 3.00 entry at 0xfa0f0, last bus=6
[ 44.186321] PCI: Using configuration type 1
[ 44.186411] Setting up standard PCI resources
[ 44.188328] SCSI subsystem initialized
[ 44.188439] libata version 2.00 loaded.
[ 44.188467] usbcore: registered new interface driver usbfs
[ 44.188578] usbcore: registered new interface driver hub
[ 44.188692] usbcore: registered new device driver usb
[ 44.188801] PCI: Probing PCI hardware
[ 44.188893] PCI: Probing PCI hardware (bus 00)
[ 44.189363] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 44.189459] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 44.189674] Boot video device is 0000:01:00.0
[ 44.190125] PCI: Transparent bridge - 0000:00:1e.0
[ 44.190732] PCI->APIC IRQ transform: 0000:00:01.0[A] -> IRQ 16
[ 44.190826] PCI->APIC IRQ transform: 0000:00:1a.0[A] -> IRQ 16
[ 44.190920] PCI->APIC IRQ transform: 0000:00:1a.1[B] -> IRQ 21
[ 44.191013] PCI->APIC IRQ transform: 0000:00:1a.7[C] -> IRQ 18
[ 44.191110] PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 16
[ 44.191214] PCI->APIC IRQ transform: 0000:00:1c.2[C] -> IRQ 18
[ 44.191308] PCI->APIC IRQ transform: 0000:00:1c.4[A] -> IRQ 16
[ 44.191401] PCI->APIC IRQ transform: 0000:00:1c.5[B] -> IRQ 17
[ 44.191495] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
[ 44.191589] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
[ 44.191682] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
[ 44.191776] PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
[ 44.191871] PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
[ 44.191964] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19
[ 44.192057] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[ 44.192166] PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 18
[ 44.192263] PCI->APIC IRQ transform: 0000:06:05.0[A] -> IRQ 21
[ 44.225750] PCI: Bridge: 0000:00:01.0
[ 44.225840] IO window: b000-bfff
[ 44.225931] MEM window: f4000000-fbffffff
[ 44.226022] PREFETCH window: d8000000-dfffffff
[ 44.226117] PCI: Bridge: 0000:00:1c.0
[ 44.226208] IO window: a000-afff
[ 44.226299] MEM window: fda00000-fdafffff
[ 44.226391] PREFETCH window: fd700000-fd7fffff
[ 44.226484] PCI: Bridge: 0000:00:1c.2
[ 44.226574] IO window: 9000-9fff
[ 44.226666] MEM window: fd600000-fd6fffff
[ 44.226757] PREFETCH window: fd500000-fd5fffff
[ 44.226850] PCI: Bridge: 0000:00:1c.4
[ 44.226941] IO window: d000-dfff
[ 44.227032] MEM window: fde00000-fdefffff
[ 44.227126] PREFETCH window: fdd00000-fddfffff
[ 44.227231] PCI: Bridge: 0000:00:1c.5
[ 44.227322] IO window: c000-cfff
[ 44.227413] MEM window: fdc00000-fdcfffff
[ 44.227505] PREFETCH window: fdb00000-fdbfffff
[ 44.227598] PCI: Bridge: 0000:00:1e.0
[ 44.227688] IO window: 8000-8fff
[ 44.227780] MEM window: fd900000-fd9fffff
[ 44.227871] PREFETCH window: fd800000-fd8fffff
[ 44.227971] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 44.227986] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 44.228001] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 44.228016] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 44.228031] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 44.228039] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 44.228053] NET: Registered protocol family 2
[ 44.238386] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 44.238564] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 44.239129] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 44.239408] TCP: Hash tables configured (established 131072 bind 65536)
[ 44.239503] TCP reno registered
[ 44.242723] Machine check exception polling timer started.
[ 44.242941] highmem bounce pool size: 64 pages
[ 44.243097] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 44.243330] io scheduler noop registered
[ 44.243445] io scheduler anticipatory registered (default)
[ 44.243587] io scheduler deadline registered
[ 44.243709] io scheduler cfq registered
[ 44.243979] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 44.244002] assign_interrupt_mode Found MSI capability
[ 44.244097] Allocate Port Service[0000:00:01.0:pcie00]
[ 44.244138] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 44.244169] assign_interrupt_mode Found MSI capability
[ 44.244260] Allocate Port Service[0000:00:1c.0:pcie00]
[ 44.244278] Allocate Port Service[0000:00:1c.0:pcie02]
[ 44.244327] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 44.244358] assign_interrupt_mode Found MSI capability
[ 44.244450] Allocate Port Service[0000:00:1c.2:pcie00]
[ 44.244468] Allocate Port Service[0000:00:1c.2:pcie02]
[ 44.244517] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 44.244547] assign_interrupt_mode Found MSI capability
[ 44.244639] Allocate Port Service[0000:00:1c.4:pcie00]
[ 44.244660] Allocate Port Service[0000:00:1c.4:pcie02]
[ 44.244709] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 44.244740] assign_interrupt_mode Found MSI capability
[ 44.244832] Allocate Port Service[0000:00:1c.5:pcie00]
[ 44.244848] Allocate Port Service[0000:00:1c.5:pcie02]
[ 44.248126] Real Time Clock Driver v1.12ac
[ 44.248243] Floppy drive(s): fd0 is 1.44M
[ 44.263516] FDC 0 is a post-1991 82077
[ 44.264774] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 44.265072] loop: loaded (max 8 devices)
[ 44.265238] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 44.266737] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 44.266898] eth0: RTL8168b/8111b at 0xf8800000, 00:50:8d:94:76:94, IRQ 18
[ 44.273879] ahci 0000:00:1f.2: version 2.0
[ 45.281329] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 45.281335] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 45.281502] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 45.281641] ata1: SATA max UDMA/133 cmd 0xF8802100 ctl 0x0 bmdma 0x0 irq 19
[ 45.281772] ata2: SATA max UDMA/133 cmd 0xF8802180 ctl 0x0 bmdma 0x0 irq 19
[ 45.281903] ata3: SATA max UDMA/133 cmd 0xF8802200 ctl 0x0 bmdma 0x0 irq 19
[ 45.282034] ata4: SATA max UDMA/133 cmd 0xF8802280 ctl 0x0 bmdma 0x0 irq 19
[ 45.282167] ata5: SATA max UDMA/133 cmd 0xF8802300 ctl 0x0 bmdma 0x0 irq 19
[ 45.282300] ata6: SATA max UDMA/133 cmd 0xF8802380 ctl 0x0 bmdma 0x0 irq 19
[ 45.282398] scsi0 : ahci
[ 45.741473] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 45.744071] ata1.00: ATA-6, max UDMA/133, 145226112 sectors: LBA48
[ 45.744167] ata1.00: ata1: dev 0 multi count 0
[ 45.744261] ata1.00: applying bridge limits
[ 45.747960] ata1.00: configured for UDMA/100
[ 45.748057] scsi1 : ahci
[ 46.206950] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 46.209556] ata2.00: ATA-6, max UDMA/133, 145226112 sectors: LBA48
[ 46.209652] ata2.00: ata2: dev 0 multi count 0
[ 46.209745] ata2.00: applying bridge limits
[ 46.213447] ata2.00: configured for UDMA/100
[ 46.213543] scsi2 : ahci
[ 46.518220] ata3: SATA link down (SStatus 0 SControl 300)
[ 46.518333] scsi3 : ahci
[ 46.821402] ata4: SATA link down (SStatus 0 SControl 300)
[ 46.821502] scsi4 : ahci
[ 47.279639] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 47.281259] ata5.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48
[ 47.281355] ata5.00: ata5: dev 0 multi count 0
[ 47.283955] ata5.00: configured for UDMA/133
[ 47.284051] scsi5 : ahci
[ 47.741021] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 47.742940] ata6.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48
[ 47.743039] ata6.00: ata6: dev 0 multi count 0
[ 47.745327] ata6.00: configured for UDMA/133
[ 47.745496] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 21.0 PQ: 0 ANSI: 5
[ 47.745727] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[ 47.745837] sda: Write Protect is off
[ 47.745927] sda: Mode Sense: 00 3a 00 00
[ 47.745935] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.746119] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[ 47.746216] sda: Write Protect is off
[ 47.746307] sda: Mode Sense: 00 3a 00 00
[ 47.746315] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.746472] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 47.781391] sd 0:0:0:0: Attached scsi disk sda
[ 47.781516] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 47.781654] scsi 1:0:0:0: Direct-Access ATA WDC WD740GD-00FL 21.0 PQ: 0 ANSI: 5
[ 47.781859] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[ 47.781959] sdb: Write Protect is off
[ 47.782052] sdb: Mode Sense: 00 3a 00 00
[ 47.782061] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.782237] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[ 47.782336] sdb: Write Protect is off
[ 47.782425] sdb: Mode Sense: 00 3a 00 00
[ 47.782434] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.782591] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 > sdb4
[ 47.823550] sd 1:0:0:0: Attached scsi disk sdb
[ 47.823673] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 47.823811] scsi 4:0:0:0: Direct-Access ATA WDC WD2500JD-22H 08.0 PQ: 0 ANSI: 5
[ 47.824012] SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
[ 47.824110] sdc: Write Protect is off
[ 47.824200] sdc: Mode Sense: 00 3a 00 00
[ 47.824209] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.824385] SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
[ 47.824482] sdc: Write Protect is off
[ 47.824572] sdc: Mode Sense: 00 3a 00 00
[ 47.824581] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.824738] sdc: sdc1
[ 52.053019] sd 4:0:0:0: Attached scsi disk sdc
[ 52.053160] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 52.053311] scsi 5:0:0:0: Direct-Access ATA WDC WD2500JD-00H 08.0 PQ: 0 ANSI: 5
[ 52.053517] SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
[ 52.053616] sdd: Write Protect is off
[ 52.053705] sdd: Mode Sense: 00 3a 00 00
[ 52.053714] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 52.053893] SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
[ 52.053991] sdd: Write Protect is off
[ 52.054080] sdd: Mode Sense: 00 3a 00 00
[ 52.054089] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 52.054248] sdd: sdd1
[ 58.475374] sd 5:0:0:0: Attached scsi disk sdd
[ 58.475506] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 58.475655] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 58.475658] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 58.475779] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 58.475967] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 58.475973] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 58.479951] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 58.480116] usb usb1: new device found, idVendor=0000, idProduct=0000
[ 58.480209] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 58.480302] usb usb1: Product: EHCI Host Controller
[ 58.480394] usb usb1: Manufacturer: Linux 2.6.19-rc6-mm2 ehci_hcd
[ 58.480486] usb usb1: SerialNumber: 0000:00:1a.7
[ 58.480631] usb usb1: configuration #1 chosen from 1 choice
[ 58.480748] hub 1-0:1.0: USB hub found
[ 58.480840] hub 1-0:1.0: 4 ports detected
[ 58.582485] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 58.582488] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 58.582617] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 58.582810] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 58.582814] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 58.586787] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 58.586950] usb usb2: new device found, idVendor=0000, idProduct=0000
[ 58.587044] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 58.587138] usb usb2: Product: EHCI Host Controller
[ 58.587229] usb usb2: Manufacturer: Linux 2.6.19-rc6-mm2 ehci_hcd
[ 58.587322] usb usb2: SerialNumber: 0000:00:1d.7
[ 58.587458] usb usb2: configuration #1 chosen from 1 choice
[ 58.587574] hub 2-0:1.0: USB hub found
[ 58.587666] hub 2-0:1.0: 6 ports detected
[ 58.689520] USB Universal Host Controller Interface driver v3.0
[ 58.689653] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 58.689656] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 58.689780] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 58.689953] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 58.690068] usb usb3: new device found, idVendor=0000, idProduct=0000
[ 58.690161] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 58.690255] usb usb3: Product: UHCI Host Controller
[ 58.690346] usb usb3: Manufacturer: Linux 2.6.19-rc6-mm2 uhci_hcd
[ 58.690439] usb usb3: SerialNumber: 0000:00:1a.0
[ 58.690576] usb usb3: configuration #1 chosen from 1 choice
[ 58.690690] hub 3-0:1.0: USB hub found
[ 58.690784] hub 3-0:1.0: 2 ports detected
[ 58.791562] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 58.791565] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 58.791686] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 58.791858] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 58.791972] usb usb4: new device found, idVendor=0000, idProduct=0000
[ 58.792065] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 58.792159] usb usb4: Product: UHCI Host Controller
[ 58.792250] usb usb4: Manufacturer: Linux 2.6.19-rc6-mm2 uhci_hcd
[ 58.792343] usb usb4: SerialNumber: 0000:00:1a.1
[ 58.792481] usb usb4: configuration #1 chosen from 1 choice
[ 58.792594] hub 4-0:1.0: USB hub found
[ 58.792685] hub 4-0:1.0: 2 ports detected
[ 58.893585] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 58.893588] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 58.893699] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 58.893869] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fd00
[ 58.893983] usb usb5: new device found, idVendor=0000, idProduct=0000
[ 58.894076] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 58.894169] usb usb5: Product: UHCI Host Controller
[ 58.894260] usb usb5: Manufacturer: Linux 2.6.19-rc6-mm2 uhci_hcd
[ 58.894355] usb usb5: SerialNumber: 0000:00:1d.0
[ 58.894489] usb usb5: configuration #1 chosen from 1 choice
[ 58.894602] hub 5-0:1.0: USB hub found
[ 58.894693] hub 5-0:1.0: 2 ports detected
[ 58.895564] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 58.995671] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 58.995674] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 58.995797] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 58.995980] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
[ 58.996093] usb usb6: new device found, idVendor=0000, idProduct=0000
[ 58.996188] usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 58.996285] usb usb6: Product: UHCI Host Controller
[ 58.996377] usb usb6: Manufacturer: Linux 2.6.19-rc6-mm2 uhci_hcd
[ 58.996470] usb usb6: SerialNumber: 0000:00:1d.1
[ 58.996606] usb usb6: configuration #1 chosen from 1 choice
[ 58.996720] hub 6-0:1.0: USB hub found
[ 58.996812] hub 6-0:1.0: 2 ports detected
[ 59.010264] usb 2-1: new device found, idVendor=0424, idProduct=a700
[ 59.010361] usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
[ 59.010518] usb 2-1: configuration #1 chosen from 1 choice
[ 59.010663] hub 2-1:1.0: USB hub found
[ 59.010887] hub 2-1:1.0: 4 ports detected
[ 59.097786] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 59.097790] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 59.097911] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 59.098094] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fb00
[ 59.098213] usb usb7: new device found, idVendor=0000, idProduct=0000
[ 59.098306] usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 59.098400] usb usb7: Product: UHCI Host Controller
[ 59.098491] usb usb7: Manufacturer: Linux 2.6.19-rc6-mm2 uhci_hcd
[ 59.098584] usb usb7: SerialNumber: 0000:00:1d.2
[ 59.100100] usb usb7: configuration #1 chosen from 1 choice
[ 59.100217] hub 7-0:1.0: USB hub found
[ 59.100309] hub 7-0:1.0: 2 ports detected
[ 59.887615] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 60.053152] usb 5-2: new device found, idVendor=0bc7, idProduct=0004
[ 60.053248] usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
[ 60.053356] usb 5-2: Product: USB Receiver
[ 60.053446] usb 5-2: Manufacturer: X10 Wireless Technology Inc
[ 60.053582] usb 5-2: configuration #1 chosen from 1 choice
[ 60.262247] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 60.434061] usb 6-1: new device found, idVendor=045e, idProduct=0039
[ 60.434157] usb 6-1: new device strings: Mfr=1, Product=3, SerialNumber=0
[ 60.434254] usb 6-1: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 60.434350] usb 6-1: Manufacturer: Microsoft
[ 60.434505] usb 6-1: configuration #1 chosen from 1 choice
[ 60.437616] usbcore: registered new interface driver hiddev
[ 60.452120] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input0
[ 60.452294] input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1
[ 60.452504] usbcore: registered new interface driver usbhid
[ 60.452596] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 60.455367] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 60.455459] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 60.455611] mice: PS/2 mouse device common for all mice
[ 60.455737] md: raid0 personality registered for level 0
[ 60.455829] md: raid1 personality registered for level 1
[ 60.455937] Advanced Linux Sound Architecture Driver Version 1.0.13 (Sun Oct 22 08:56:16 2006 UTC).
[ 60.456254] PCI: Setting latency timer of device 0000:06:05.0 to 64
[ 60.478260] ALSA device list:
[ 60.478349] #0: SBLive! Value [CT4832] (rev.8, serial:0x80271102) at 0x8f00, irq 21
[ 60.478515] TCP cubic registered
[ 60.478608] NET: Registered protocol family 1
[ 60.478701] NET: Registered protocol family 17
[ 60.478800] Starting balanced_irq
[ 60.478896] Using IPI Shortcut mode
[ 60.479903] Time: tsc clocksource has been installed.
[ 60.580568] md: Autodetecting RAID arrays.
[ 60.686794] md: autorun ...
[ 60.686897] md: considering sdd1 ...
[ 60.686989] md: adding sdd1 ...
[ 60.687080] md: adding sdc1 ...
[ 60.687171] md: sdb7 has different UUID to sdd1
[ 60.687262] md: sdb6 has different UUID to sdd1
[ 60.687354] md: sdb5 has different UUID to sdd1
[ 60.687445] md: sdb2 has different UUID to sdd1
[ 60.687537] md: sdb1 has different UUID to sdd1
[ 60.687628] md: sda7 has different UUID to sdd1
[ 60.687728] md: sda6 has different UUID to sdd1
[ 60.687820] md: sda5 has different UUID to sdd1
[ 60.687911] md: sda2 has different UUID to sdd1
[ 60.688003] md: sda1 has different UUID to sdd1
[ 60.688121] md: created md5
[ 60.688210] md: bind<sdc1>
[ 60.688303] md: bind<sdd1>
[ 60.688395] md: running: <sdd1><sdc1>
[ 60.688565] md5: setting max_sectors to 128, segment boundary to 32767
[ 60.688659] raid0: looking at sdd1
[ 60.688751] raid0: comparing sdd1(244195904) with sdd1(244195904)
[ 60.688869] raid0: END
[ 60.688957] raid0: ==> UNIQUE
[ 60.689047] raid0: 1 zones
[ 60.689135] raid0: looking at sdc1
[ 60.689225] raid0: comparing sdc1(244195904) with sdd1(244195904)
[ 60.689343] raid0: EQUAL
[ 60.689432] raid0: FINAL 1 zones
[ 60.689522] raid0: done.
[ 60.689610] raid0 : md_size is 488391808 blocks.
[ 60.689702] raid0 : conf->hash_spacing is 488391808 blocks.
[ 60.689796] raid0 : nb_zone is 1.
[ 60.689886] raid0 : Allocating 4 bytes for hash.
[ 60.689993] md: considering sdb7 ...
[ 60.690085] md: adding sdb7 ...
[ 60.690176] md: sdb6 has different UUID to sdb7
[ 60.690268] md: sdb5 has different UUID to sdb7
[ 60.690361] md: sdb2 has different UUID to sdb7
[ 60.690452] md: sdb1 has different UUID to sdb7
[ 60.690545] md: adding sda7 ...
[ 60.690635] md: sda6 has different UUID to sdb7
[ 60.690730] md: sda5 has different UUID to sdb7
[ 60.690822] md: sda2 has different UUID to sdb7
[ 60.690914] md: sda1 has different UUID to sdb7
[ 60.691029] md: created md4
[ 60.691118] md: bind<sda7>
[ 60.691212] md: bind<sdb7>
[ 60.691304] md: running: <sdb7><sda7>
[ 60.691471] md4: setting max_sectors to 128, segment boundary to 32767
[ 60.691564] raid0: looking at sdb7
[ 60.691655] raid0: comparing sdb7(58926272) with sdb7(58926272)
[ 60.691775] raid0: END
[ 60.691863] raid0: ==> UNIQUE
[ 60.691952] raid0: 1 zones
[ 60.692041] raid0: looking at sda7
[ 60.692130] raid0: comparing sda7(58926272) with sdb7(58926272)
[ 60.692247] raid0: EQUAL
[ 60.692336] raid0: FINAL 1 zones
[ 60.692424] raid0: done.
[ 60.692513] raid0 : md_size is 117852544 blocks.
[ 60.692604] raid0 : conf->hash_spacing is 117852544 blocks.
[ 60.692697] raid0 : nb_zone is 1.
[ 60.692788] raid0 : Allocating 4 bytes for hash.
[ 60.692893] md: considering sdb6 ...
[ 60.692986] md: adding sdb6 ...
[ 60.693076] md: sdb5 has different UUID to sdb6
[ 60.693168] md: sdb2 has different UUID to sdb6
[ 60.693261] md: sdb1 has different UUID to sdb6
[ 60.693355] md: adding sda6 ...
[ 60.693445] md: sda5 has different UUID to sdb6
[ 60.693537] md: sda2 has different UUID to sdb6
[ 60.693631] md: sda1 has different UUID to sdb6
[ 60.693753] md: created md3
[ 60.693842] md: bind<sda6>
[ 60.693936] md: bind<sdb6>
[ 60.694028] md: running: <sdb6><sda6>
[ 60.694196] md3: setting max_sectors to 128, segment boundary to 32767
[ 60.694289] raid0: looking at sdb6
[ 60.694379] raid0: comparing sdb6(7815488) with sdb6(7815488)
[ 60.694497] raid0: END
[ 60.694585] raid0: ==> UNIQUE
[ 60.694675] raid0: 1 zones
[ 60.694766] raid0: looking at sda6
[ 60.694856] raid0: comparing sda6(7815488) with sdb6(7815488)
[ 60.694974] raid0: EQUAL
[ 60.695062] raid0: FINAL 1 zones
[ 60.695151] raid0: done.
[ 60.695240] raid0 : md_size is 15630976 blocks.
[ 60.695332] raid0 : conf->hash_spacing is 15630976 blocks.
[ 60.695424] raid0 : nb_zone is 1.
[ 60.695514] raid0 : Allocating 4 bytes for hash.
[ 60.695619] md: considering sdb5 ...
[ 60.695713] md: adding sdb5 ...
[ 60.695804] md: sdb2 has different UUID to sdb5
[ 60.695895] md: sdb1 has different UUID to sdb5
[ 60.695988] md: adding sda5 ...
[ 60.696078] md: sda2 has different UUID to sdb5
[ 60.696170] md: sda1 has different UUID to sdb5
[ 60.696284] md: created md2
[ 60.696373] md: bind<sda5>
[ 60.696467] md: bind<sdb5>
[ 60.696559] md: running: <sdb5><sda5>
[ 60.696755] md2: setting max_sectors to 128, segment boundary to 32767
[ 60.696848] raid0: looking at sdb5
[ 60.696938] raid0: comparing sdb5(3903680) with sdb5(3903680)
[ 60.697055] raid0: END
[ 60.697143] raid0: ==> UNIQUE
[ 60.697233] raid0: 1 zones
[ 60.697321] raid0: looking at sda5
[ 60.697410] raid0: comparing sda5(3903680) with sdb5(3903680)
[ 60.697527] raid0: EQUAL
[ 60.697616] raid0: FINAL 1 zones
[ 60.697706] raid0: done.
[ 60.697797] raid0 : md_size is 7807360 blocks.
[ 60.697888] raid0 : conf->hash_spacing is 7807360 blocks.
[ 60.697980] raid0 : nb_zone is 1.
[ 60.698070] raid0 : Allocating 4 bytes for hash.
[ 60.698176] md: considering sdb2 ...
[ 60.698268] md: adding sdb2 ...
[ 60.698358] md: sdb1 has different UUID to sdb2
[ 60.698451] md: adding sda2 ...
[ 60.698542] md: sda1 has different UUID to sdb2
[ 60.698661] md: created md1
[ 60.698753] md: bind<sda2>
[ 60.698846] md: bind<sdb2>
[ 60.698940] md: running: <sdb2><sda2>
[ 60.699108] md1: setting max_sectors to 128, segment boundary to 32767
[ 60.699201] raid0: looking at sdb2
[ 60.699291] raid0: comparing sdb2(979840) with sdb2(979840)
[ 60.699408] raid0: END
[ 60.699496] raid0: ==> UNIQUE
[ 60.699585] raid0: 1 zones
[ 60.699674] raid0: looking at sda2
[ 60.699766] raid0: comparing sda2(979840) with sdb2(979840)
[ 60.699883] raid0: EQUAL
[ 60.699971] raid0: FINAL 1 zones
[ 60.700060] raid0: done.
[ 60.700148] raid0 : md_size is 1959680 blocks.
[ 60.700238] raid0 : conf->hash_spacing is 1959680 blocks.
[ 60.700330] raid0 : nb_zone is 1.
[ 60.700419] raid0 : Allocating 4 bytes for hash.
[ 60.701904] md: considering sdb1 ...
[ 60.701995] md: adding sdb1 ...
[ 60.702086] md: adding sda1 ...
[ 60.702175] md: created md0
[ 60.702264] md: bind<sda1>
[ 60.702357] md: bind<sdb1>
[ 60.702448] md: running: <sdb1><sda1>
[ 60.702645] raid1: raid set md0 active with 2 out of 2 mirrors
[ 60.702762] md: ... autorun DONE.
[ 60.733320] reiser4: md1: found disk format 4.0.0.
[ 60.884250] VFS: Mounted root (reiser4 filesystem) readonly.
[ 60.884412] Freeing unused kernel memory: 208k freed
[ 62.678215] lirc_dev: IR Remote Control driver registered, at major 61
[ 62.680391]
[ 62.680391] lirc_atiusb: USB remote driver for LIRC v0.5
[ 62.680393] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
[ 62.680415] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 62.700249] lirc_atiusb[2]: X10 Wireless Technology Inc USB Receiver on usb5:2
[ 62.712244] usbcore: registered new interface driver lirc_atiusb
[ 62.780801] nvidia: module license 'NVIDIA' taints kernel.
[ 62.782241] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 62.782325] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
[ 63.133099] reiser4: md2: found disk format 4.0.0.
[ 63.462631] reiser4: md3: found disk format 4.0.0.
[ 64.299957] reiser4: md4: found disk format 4.0.0.
[ 68.254068] reiser4: md5: found disk format 4.0.0.
[ 88.669985] Adding 883564k swap on /dev/sda4. Priority:1 extents:1 across:883564k
[ 88.672960] Adding 883564k swap on /dev/sdb4. Priority:1 extents:1 across:883564k
[ 90.468175] reiser4[blogd(2036)]: disable_write_barrier (fs/reiser4/wander.c:234)[zam-1055]:
[ 90.468177] NOTICE: md2 does not support write barriers, using synchronous write instead.
[ 93.372691] r8169: eth0: link up
[ 93.372698] r8169: eth0: link up
[ 108.771466] usb 6-2: new low speed USB device using uhci_hcd and address 3
[ 109.087068] usb 6-2: new device found, idVendor=046d, idProduct=c30e
[ 109.087071] usb 6-2: new device strings: Mfr=1, Product=2, SerialNumber=0
[ 109.087075] usb 6-2: Product: HID compliant keyboard
[ 109.087077] usb 6-2: Manufacturer: Logitech
[ 109.087145] usb 6-2: configuration #1 chosen from 1 choice
[ 109.159100] input: Logitech HID compliant keyboard as /class/input/input1
[ 109.159119] input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.1-2
[ 109.280994] input: Logitech HID compliant keyboard as /class/input/input2
[ 109.281016] input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.1-2
[ 175.192634] reiser4[python(5737)]: disable_write_barrier (fs/reiser4/wander.c:234)[zam-1055]:
[ 175.192635] NOTICE: md4 does not support write barriers, using synchronous write instead.
[ 176.853797] can't create port
[ 665.208489] reiser4[ktxnmgrd:md1:ru(492)]: disable_write_barrier (fs/reiser4/wander.c:234)[zam-1055]:
[ 665.208490] NOTICE: md1 does not support write barriers, using synchronous write instead.
[ 700.571434] reiser4[ktxnmgrd:md3:ru(2152)]: disable_write_barrier (fs/reiser4/wander.c:234)[zam-1055]:
[ 700.571435] NOTICE: md3 does not support write barriers, using synchronous write instead.
[50953.465334] can't create port
[52508.028367] can't create port
[66793.914200] can't create port
[66832.318440] can't create port
[66941.667318] can't create port
[66973.736046] can't create port
[67439.409314] can't create port
[82048.255126] can't create port
[85055.578172] reiser4[unrar(30787)]: disable_write_barrier (fs/reiser4/wander.c:234)[zam-1055]:
[85055.578174] NOTICE: md5 does not support write barriers, using synchronous write instead.
[87825.501998] can't create port
[89520.019538] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[89520.019545] ata2.00: cmd c8/00:08:fe:68:df/00:00:00:00:00/e1 tag 0 data 4096 in
[89520.019547] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[89520.322292] ata2: soft resetting port
[89527.515891] ata2: port is slow to respond, please be patient (Status 0xd0)
[89550.457913] ata2: port failed to respond (30 secs, Status 0xd0)
[89550.457917] ata2: softreset failed (device not ready)
[89550.457921] ata2: softreset failed, retrying in 5 secs
[89555.454103] ata2: hard resetting port
[89562.799693] ata2: port is slow to respond, please be patient (Status 0x80)
[89585.740239] ata2: port failed to respond (30 secs, Status 0x80)
[89585.740242] ata2: COMRESET failed (device not ready)
[89585.740245] ata2: hardreset failed, retrying in 5 secs
[89590.736978] ata2: hard resetting port
[89598.081854] ata2: port is slow to respond, please be patient (Status 0x80)
[89617.604742] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[89617.611034] ata2.00: configured for UDMA/100
[89617.611042] ata2: EH complete
[89617.623426] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[89617.633551] sdb: Write Protect is off
[89617.633553] sdb: Mode Sense: 00 3a 00 00
[89617.637765] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA