Part of Slepp's ProjectsPastebinTURLImagebinFilebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate
Sign In | Create Account

Someone
Thursday, November 30th, 2006 at 11:09:33pm UTC 

  1. Password:
  2. No directory, logging in with HOME=/
  3.  
  4. Welcome to Unslung V2.3R63-uNSLUng-6.8-beta
  5.  
  6.    -------- NOTE: RUNNING FROM INTERNAL FLASH  --------
  7.  
  8. This system is currently running from the internal flash memory,
  9. it has NOT booted up into "unslung" mode from an external drive.
  10.  
  11. In this mode, very few services are running, and available disk
  12. space is extremely limited.  This mode is normally only used
  13. for initial installation, and system maintenance and recovery.
  14.  
  15.  
  16. BusyBox v0.60.4 (2005.03.22-06:52+0000) Built-in shell (ash)
  17. Enter 'help' for a list of built-in commands.
  18.  
  19. # dmesg
  20. disabled
  21. Linux NET4.0 for Linux 2.4
  22. Based upon Swansea University Computer Society NET3.039
  23. Initializing RT netlink socket
  24. Starting kswapd
  25. VFS: Disk quotas vdquot_6.5.1
  26. Journalled Block Device driver loaded
  27. devfs: v1.12c (20020818) Richard Gooch ([email protected])
  28. devfs: boot_options: 0x0
  29. Installing knfsd (copyright (C) 1996 [email protected]).
  30. JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
  31. i2c-core.o: i2c core module
  32. i2c-dev.o: i2c /dev entries driver module
  33. i2c-core.o: driver i2c-dev dummy driver registered.
  34. i2c-algo-bit.o: i2c bit algorithm module version 2.6.1 (20010830)
  35. pty: 256 Unix98 ptys configured
  36. Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  37. ttyS00 at 0xff000003 (irq = 15) is a XScale UART
  38. ttyS01 at 0xff001003 (irq = 13) is a XScale UART
  39. RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
  40. SCSI subsystem driver Revision: 1.00
  41. * host:<NULL>
  42. IXP425 Flash: Found an alias at 0x800000 for the chip at 0x0
  43. cfi_cmdset_0001: Erase suspend on write enabled
  44. 0: offset=0x0,size=0x20000,blocks=64
  45. Using buffer write method
  46. Creating 6 MTD partitions on "IXP425 Flash":
  47. 0x00000000-0x00040000 : "RedBoot"
  48. 0x00040000-0x00060000 : "SysConf"
  49. 0x00060000-0x00160000 : "Kernel"
  50. 0x00160000-0x00180000 : "Ramdisk"
  51. 0x00180000-0x007e0000 : "Flashdisk"
  52. 0x007e0000-0x00800000 : "FIS directory"
  53. usb.c: registered new driver usbdevfs
  54. usb.c: registered new driver hub
  55. pci probe begin
  56. ehci_hcd 00:01.2: NEC Corporation USB 2.0
  57. ehci_hcd 00:01.2: irq 26, pci mem c3872f00
  58. usb.c: new USB bus registered, assigned bus number 1
  59. PCI: 00:01.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
  60. PCI: 00:01.2 PCI cache line size corrected to 32.
  61. ehci_hcd 00:01.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
  62. Device descriptor:8 bytes received.
  63. Device descriptor:18 bytes received.
  64. hub.c: USB hub found
  65. hub.c: 5 ports detected
  66. pci probe ok
  67. host/usb-uhci.c: $Revision: 1.3 $ time 18:18:04 Apr 10 2006
  68. host/usb-uhci.c: High bandwidth mode enabled
  69. host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
  70. host/usb-ohci.c: USB OHCI at membase 0xc387a000, IRQ 28
  71. host/usb-ohci.c: usb-00:01.0, NEC Corporation USB
  72. usb.c: new USB bus registered, assigned bus number 2
  73. Device descriptor:8 bytes received.
  74. Device descriptor:18 bytes received.
  75. hub.c: USB hub found
  76. hub.c: 3 ports detected
  77. host/usb-ohci.c: USB OHCI at membase 0xc3880000, IRQ 27
  78. host/usb-ohci.c: usb-00:01.1, NEC Corporation USB (#2)
  79. usb.c: new USB bus registered, assigned bus number 3
  80. Device descriptor:8 bytes received.
  81. Device descriptor:18 bytes received.
  82. hub.c: USB hub found
  83. hub.c: 2 ports detected
  84. Initializing USB Mass Storage driver...
  85. usb.c: registered new driver usb-storage
  86. USB Mass Storage support registered.
  87. i2c-dev.o: Registered 'IXP425 I2C Adapter' as minor 0
  88. i2c-core.o: adapter IXP425 I2C Adapter registered as adapter 0.
  89. NET4: Linux TCP/IP 1.0 for NET4.0
  90. IP Protocols: ICMP, UDP, TCP, IGMP
  91. IP: routing cache hash table of 512 buckets, 4Kbytes
  92. TCP: Hash tables configured (established 2048 bind 4096)
  93. IP-Config: No network devices available.
  94. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  95. NetWinder Floating Point Emulator V0.97 (double precision)
  96. Unknown but compatible feature node (0x2005) found at offset 0x00000000
  97. Unknown but compatible feature node (0x2005) found at offset 0x000a0000
  98. Unknown but compatible feature node (0x2005) found at offset 0x00120000
  99. Unknown but compatible feature node (0x2005) found at offset 0x00140000
  100. Unknown but compatible feature node (0x2005) found at offset 0x00160000
  101. Unknown but compatible feature node (0x2005) found at offset 0x00180000
  102. Unknown but compatible feature node (0x2005) found at offset 0x001a0000
  103. Unknown but compatible feature node (0x2005) found at offset 0x001c0000
  104. Unknown but compatible feature node (0x2005) found at offset 0x001e0000
  105. Unknown but compatible feature node (0x2005) found at offset 0x00200000
  106. Unknown but compatible feature node (0x2005) found at offset 0x00220000
  107. Unknown but compatible feature node (0x2005) found at offset 0x00240000
  108. Unknown but compatible feature node (0x2005) found at offset 0x00260000
  109. Unknown but compatible feature node (0x2005) found at offset 0x00280000
  110. Unknown but compatible feature node (0x2005) found at offset 0x002a0000
  111. Unknown but compatible feature node (0x2005) found at offset 0x002c0000
  112. Unknown but compatible feature node (0x2005) found at offset 0x002e0000
  113. Unknown but compatible feature node (0x2005) found at offset 0x00300000
  114. Unknown but compatible feature node (0x2005) found at offset 0x00320000
  115. Unknown but compatible feature node (0x2005) found at offset 0x00340000
  116. Unknown but compatible feature node (0x2005) found at offset 0x00360000
  117. Unknown but compatible feature node (0x2005) found at offset 0x00380000
  118. Unknown but compatible feature node (0x2005) found at offset 0x003a0000
  119. Unknown but compatible feature node (0x2005) found at offset 0x003c0000
  120. Unknown but compatible feature node (0x2005) found at offset 0x003e0000
  121. Unknown but compatible feature node (0x2005) found at offset 0x00400000
  122. Unknown but compatible feature node (0x2005) found at offset 0x00480000
  123. Unknown but compatible feature node (0x2005) found at offset 0x004a0000
  124. Unknown but compatible feature node (0x2005) found at offset 0x004c0000
  125. Unknown but compatible feature node (0x2005) found at offset 0x004e0000
  126. Unknown but compatible feature node (0x2005) found at offset 0x00500000
  127. Unknown but compatible feature node (0x2005) found at offset 0x00520000
  128. Unknown but compatible feature node (0x2005) found at offset 0x00540000
  129. VFS: Mounted root (jffs2 filesystem).
  130. Freeing init memory: 244K
  131. Module init.
  132. ixp425_eth:
  133. Initializing IXP425 NPE Ethernet driver software v. 1.1
  134. ixp425_eth: CPU clock speed (approx) = 0 MHz
  135. [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201
  136. ixp425_eth: ixp0 is using the PHY at address 1
  137. ixp425_eth: ixp1 is using the PHY at address 0
  138. ixp425_eth: ixEthMiiLinkStatus failed on PHY0.
  139.         Can't determine
  140. the auto negotiated parameters. Using default values.
  141. enable_irq(22) unbalanced from c39431bc
  142. X1226: I2C based RTC driver.
  143. i2c-core.o: driver X1226 registered.
  144. X1226: found X1226 on IXP425 I2C Adapter
  145. i2c-core.o: client [X1226] registered to adapter [IXP425 I2C Adapter](pos. 0).
  146. atr is 20
  147. ufsd: driver loaded
  148. hub.c: new USB device 00:01.2-2, assigned address 2
  149. Device descriptor:8 bytes received.
  150. Device descriptor:18 bytes received.
  151. Protocol: Transparent SCSI
  152. *** detect:usb-storage
  153. * scsi_register: usb-storage-0,
  154. * scsi_reg, hostno:0 prot is 50
  155. * scsi_reg, retval->host_no:0
  156. scsi0 : SCSI emulation for USB Mass Storage devices
  157. ! scan_scsis
  158. do read capacity!!!
  159.  read capacity ok!!!
  160. The capacity is 625142448
  161. *** 50
  162.   Vendor: SEAGATE   Model: ST3320820A        Rev: 3.AA
  163.   Type:   Direct-Access                      ANSI SCSI revision: 02
  164. Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
  165. SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
  166. 32 port connect!!!!!
  167. Partition check:
  168.  /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
  169. WARNING: USB Mass Storage data integrity not assured
  170. USB Mass Storage device found at 2
  171. kjournald starting.  Commit interval 5 seconds
  172. EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
  173. EXT3-fs: recovery complete.
  174. EXT3-fs: mounted filesystem with ordered data mode.
  175. kjournald starting.  Commit interval 5 seconds
  176. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  177. EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
  178. EXT3-fs: recovery complete.
  179. EXT3-fs: mounted filesystem with ordered data mode.
  180. Adding Swap: 120480k swap-space (priority -1)
  181. EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
  182. # urrently running from the internal flash memory,
  183. urrently: No such file or directory
  184. # it has NOT booted up into "unslung" mode from an external drive.
  185.  
  186. # /sbin/unsling -nopw disk2
  187. Checking if able to unsling...
  188.  
  189. Waiting for /share/flash/data ...
  190.  
  191. Target disk is /share/flash/data
  192. Checking that /share/flash/data has been properly formatted...
  193.  
  194. Error: /share/flash/data does not appear to have been formatted by the
  195. Linksys formatting utility.  Please go to the web interface,
  196. and format the drive before unslinging.
  197. #

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will expire by default in one month. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right
worth-right