All pastes #2510939 Raw Edit

Unnamed

public unlisted text v1 · immutable
#2510939 ·published 2013-12-17 17:45 UTC
rendered paste body
lspci -vv:

lspci -vv
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
        Subsystem: Lenovo Device 220e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 3000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0300c  Data: 4122
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a4] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: i915
        Kernel modules: i915

00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at f0630000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D3 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0300c  Data: 4142
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04) (prog-if 30 [XHCI])
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0620000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] MSI: Enable- Count=1/8 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000

00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f0639000 (64-bit, non-prefetchable) [size=16]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000

00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04)
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f0600000 (32-bit, non-prefetchable) [disabled] [size=128K]
        Region 1: Memory at f063f000 (32-bit, non-prefetchable) [disabled] [size=4K]
        Region 2: I/O ports at 3080 [disabled] [size=32]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 4162
        Capabilities: [e0] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: e1000e

00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f063e000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at f0634000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 41e1
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
                VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=2 ArbSelect=Fixed TC/VC=04
                        Status: NegoPending- InProgress-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: f0500000-f05fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Lenovo Device 220e
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: f0400000-f04fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Lenovo Device 220e
        Capabilities: [a0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f063d000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP+
        Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation QM87 Express LPC Controller (rev 04)
        Subsystem: Lenovo Device 220e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
        Subsystem: Lenovo Device 220e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 40
        Region 0: I/O ports at 30a8 [size=8]
        Region 1: I/O ports at 30b4 [size=4]
        Region 2: I/O ports at 30a0 [size=8]
        Region 3: I/O ports at 30b0 [size=4]
        Region 4: I/O ports at 3060 [size=32]
        Region 5: Memory at f063c000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0300c  Data: 4181
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
        Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
        Subsystem: Lenovo Device 220e
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f0638000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at efa0 [size=32]
        Kernel driver in use: i801_smbus

02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
        Subsystem: Lenovo Device 220e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f0500000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Via message/WAKE#
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [140 v1] Device Serial Number 00-00-00-01-00-4c-e0-00
        Capabilities: [150 v1] Latency Tolerance Reporting
                Max snoop latency: 3145728ns
                Max no snoop latency: 3145728ns
        Capabilities: [158 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=60us PortTPowerOnTime=60us

03:00.0 Network controller: Intel Corporation Wireless 7260 (rev 83)
        Subsystem: Intel Corporation Dual Band Wireless-AC 7260
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 42
        Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [c8] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 41b1
        Capabilities: [40] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <32us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via WAKE#
                DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-, LTR+, OBFF Disabled
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140 v1] Device Serial Number 5c-51-4f-ff-ff-54-9e-67
        Capabilities: [14c v1] Latency Tolerance Reporting
                Max snoop latency: 3145728ns
                Max no snoop latency: 3145728ns
        Capabilities: [154 v1] Vendor Specific Information: ID=cafe Rev=1 Len=014 <?>
        Kernel driver in use: iwlwifi


dmesg:

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.13.0-rc3danvet-11323-g74011e3-dirty (root@knigge) (gcc version 4.8.2 (Gentoo 4.8.2 p1.0, pie-0.5.8) ) #1 SMP Wed Dec 11 09:40:37 CET 2013
[    0.000000] Command line: BOOT_IMAGE=/kernel-danvet root=/dev/sda6 rootdelay=8 ro i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 "acpi_osi=!Windows 2012"
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf82efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf82f000-0x00000000dcd3efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dceff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20ANCTO1WW/20ANCTO1WW, BIOS GLET42WW (1.17 ) 11/14/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 00DCF00000 mask 7FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xcf82f max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x019b2000, 0x019b2fff] PGTABLE
[    0.000000] BRK [0x019b3000, 0x019b3fff] PGTABLE
[    0.000000] BRK [0x019b4000, 0x019b4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41e400000-0x41e5fffff]
[    0.000000]  [mem 0x41e400000-0x41e5fffff] page 2M
[    0.000000] BRK [0x019b5000, 0x019b5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41c000000-0x41e3fffff]
[    0.000000]  [mem 0x41c000000-0x41e3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[    0.000000]  [mem 0x400000000-0x41bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcf82efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xcf7fffff] page 2M
[    0.000000]  [mem 0xcf800000-0xcf82efff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 1G
[    0.000000] ACPI: RSDP 00000000000f0120 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 00000000dcefe170 0000D4 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dcef9000 00010C (v05 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: DSDT 00000000dcee2000 011777 (v01 LENOVO TP-GL    00001170 INTL 20120711)
[    0.000000] ACPI: FACS 00000000dce4a000 000040
[    0.000000] ACPI: DBGP 00000000dcefc000 000034 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: ECDT 00000000dcefb000 000052 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: HPET 00000000dcef8000 000038 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: APIC 00000000dcef7000 000098 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: MCFG 00000000dcef6000 00003C (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: SSDT 00000000dcef5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcef4000 00044F (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcee1000 000B75 (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcee0000 00076F (v01 LENOVO  Cpu0Ist 00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcedf000 000AD8 (v01 LENOVO    CpuPm 00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcedd000 001215 (v01 LENOVO  SaSsdt  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcedc000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.000000] ACPI: PCCT 00000000dcedb000 00006E (v05 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: SSDT 00000000dceda000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.000000] ACPI: UEFI 00000000dced9000 000042 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: MSDM 00000000dce42000 000055 (v03 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: ASF! 00000000dcefd000 0000A5 (v32 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: BATB 00000000dced8000 000046 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: FPDT 00000000dced7000 000064 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: UEFI 00000000dced6000 0002E2 (v01 LENOVO TP-GL    00001170 PTEC 00000002)
[    0.000000] ACPI: SSDT 00000000dced5000 00047F (v01 LENOVO IsctTabl 00001000 INTL 20120711)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x41e5fffff]
[    0.000000]   NODE_DATA [mem 0x41e5fb000-0x41e5fdfff]
[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e000000-ffff88041dbfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x41e5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xcf82efff]
[    0.000000]   node   0: [mem 0x100000000-0x41e5fffff]
[    0.000000] On node 0 totalpages: 4120011
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13217 pages used for memmap
[    0.000000]   DMA32 zone: 845871 pages, LIFO batch:31
[    0.000000]   Normal zone: 51096 pages used for memmap
[    0.000000]   Normal zone: 3270144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88041e200000 s74112 r8192 d24192 u1048576
[    0.000000] pcpu-alloc: s74112 r8192 d24192 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4055613
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/kernel-danvet root=/dev/sda6 rootdelay=8 ro i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 "acpi_osi=!Windows 2012"
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Memory: 16145524K/16480044K available (6189K kernel code, 497K rwdata, 1944K rodata, 812K init, 436K bss, 334520K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:4352 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2893.451 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5789.02 BogoMIPS (lpj=9644836)
[    0.000214] pid_max: default: 32768 minimum: 301
[    0.000353] Security Framework initialized
[    0.002692] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.011101] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.014830] Mount-cache hash table entries: 256
[    0.015240] Initializing cgroup subsys blkio
[    0.015378] CPU: Physical Processor ID: 0
[    0.015479] CPU: Processor Core ID: 0
[    0.015584] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.017751] mce: CPU supports 7 MCE banks
[    0.017876] CPU0: Thermal monitoring enabled (TM1)
[    0.018001] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[    0.018474] Freeing SMP alternatives memory: 28K (ffffffff8193d000 - ffffffff81944000)
[    0.018713] ACPI: Core revision 20131115
[    0.041606] ACPI: All ACPI Tables successfully acquired
[    0.043517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076686] smpboot: CPU0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz (fam: 06, model: 3c, stepping: 03)
[    0.077082] TSC deadline timer enabled
[    0.077097] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.077589] ... version:                3
[    0.077734] ... bit width:              48
[    0.077879] ... generic registers:      8
[    0.078023] ... value mask:             0000ffffffffffff
[    0.078171] ... max period:             0000ffffffffffff
[    0.078319] ... fixed-purpose events:   3
[    0.078463] ... event mask:             00000007000000ff
[    0.078966] x86: Booting SMP configuration:
[    0.079113] .... node  #0, CPUs:      #1
[    0.094653] x86: Booted up 1 node, 2 CPUs
[    0.094931] smpboot: Total of 2 processors activated (11578.04 BogoMIPS)
[    0.100003] devtmpfs: initialized
[    0.100709] pinctrl core: initialized pinctrl subsystem
[    0.100931] NET: Registered protocol family 16
[    0.101656] cpuidle: using governor menu
[    0.101889] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.102128] ACPI: bus type PCI registered
[    0.102566] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.102813] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.114451] PCI: Using configuration type 1 for base access
[    0.124826] bio: create slab <bio-0> at 0
[    0.125193] ACPI: Added _OSI(Module Device)
[    0.125340] ACPI: Added _OSI(Processor Device)
[    0.125486] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.125632] ACPI: Added _OSI(Processor Aggregator Device)
[    0.125782] ACPI: Deleted _OSI(Windows 2012)
[    0.130315] ACPI : EC: EC description table is found, configuring boot EC
[    0.143701] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.176708] ACPI: SSDT 00000000dcd2d918 000436 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
[    0.180586] ACPI: Dynamic OEM Table Load:
[    0.180827] ACPI: SSDT           (null) 000436 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
[    0.190338] ACPI: SSDT 00000000dcd2e618 0005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
[    0.191936] ACPI: Dynamic OEM Table Load:
[    0.192176] ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
[    0.200022] ACPI: SSDT 00000000dcd2fc18 000119 (v01  PmRef    ApCst 00003000 INTL 20120711)
[    0.201451] ACPI: Dynamic OEM Table Load:
[    0.201691] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20120711)
[    0.210415] ACPI: Interpreter enabled
[    0.210575] ACPI: (supports S0 S5)
[    0.210719] ACPI: Using IOAPIC for interrupt routing
[    0.210966] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.211972] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.230529] ACPI: Power Resource [PUBS] (on)
[    0.231852] ACPI: Power Resource [NVP3] (on)
[    0.232073] ACPI: Power Resource [NVP2] (on)
[    0.249924] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.250707] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[    0.251482] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[    0.252248] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
[    0.253017] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11)
[    0.253764] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.254717] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.255489] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11)
[    0.256200] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.256360] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.256830] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.257082] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.257329] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.257569] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.257809] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.258100] PCI host bridge to bus 0000:00
[    0.258249] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.258399] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.258552] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.258705] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.258860] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
[    0.259014] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[    0.259182] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.259388] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.259416] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.259432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.259443] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.259635] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.259655] pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
[    0.259912] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.259971] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
[    0.260122] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.260284] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.260330] pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063900f 64bit]
[    0.260481] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.260655] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[    0.260697] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
[    0.260717] pci 0000:00:19.0: reg 0x14: [mem 0xf063f000-0xf063ffff]
[    0.260736] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    0.260884] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.261046] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.261087] pci 0000:00:1a.0: reg 0x10: [mem 0xf063e000-0xf063e3ff]
[    0.261268] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.261428] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.261463] pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
[    0.261624] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.261781] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.261948] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.262105] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.262272] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.262451] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.262493] pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff]
[    0.262674] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.262831] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
[    0.263163] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.263205] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    0.263225] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    0.263244] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    0.263263] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    0.263282] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.263307] pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff]
[    0.263407] pci 0000:00:1f.2: PME# supported from D3hot
[    0.263558] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.263594] pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit]
[    0.263644] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.264037] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.264114] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff]
[    0.264682] pci 0000:02:00.0: supports D1 D2
[    0.264686] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.270018] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.270176] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.270454] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
[    0.270626] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[    0.271444] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.276716] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.276874] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.278982] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.279251] ACPI: \_SB_.PCI0: notify handler is installed
[    0.279370] Found 1 acpi root devices
[    0.279504] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.279889] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.280142] vgaarb: loaded
[    0.280282] vgaarb: bridge control possible 0000:00:02.0
[    0.280636] SCSI subsystem initialized
[    0.280891] libata version 3.00 loaded.
[    0.280904] ACPI: bus type USB registered
[    0.281138] usbcore: registered new interface driver usbfs
[    0.281331] usbcore: registered new interface driver hub
[    0.281540] usbcore: registered new device driver usb
[    0.281808] Linux video capture interface: v2.00
[    0.282031] pps_core: LinuxPPS API ver. 1 registered
[    0.282178] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.282455] PTP clock support registered
[    0.282915] Advanced Linux Sound Architecture Driver Initialized.
[    0.283066] PCI: Using ACPI for IRQ routing
[    0.287080] PCI: pci_cache_line_size set to 64 bytes
[    0.287201] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.287205] e820: reserve RAM buffer [mem 0xcf82f000-0xcfffffff]
[    0.287209] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[    0.287479] Bluetooth: Core ver 2.17
[    0.287669] NET: Registered protocol family 31
[    0.287816] Bluetooth: HCI device and connection manager initialized
[    0.287969] Bluetooth: HCI socket layer initialized
[    0.288117] Bluetooth: L2CAP socket layer initialized
[    0.288268] Bluetooth: SCO socket layer initialized
[    0.288605] cfg80211: Calling CRDA to update world regulatory domain
[    0.289271] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.289855] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.292044] Switched to clocksource hpet
[    0.292280] pnp: PnP ACPI init
[    0.292432] ACPI: bus type PNP registered
[    0.293378] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.293535] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.293690] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.293843] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.293999] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.294154] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.294308] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.294480] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.294634] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.294789] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.294943] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.295099] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.295255] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.295419] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.295575] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.295730] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.295887] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.296198] system 00:01: [io  0x1800-0x187f] could not be reserved
[    0.296354] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.296505] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.296657] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.296809] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.296963] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.297117] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.297273] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.297427] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.297581] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.297735] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.297888] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.298045] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.298201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.298369] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.298388] pnp 00:03: [dma 4]
[    0.298458] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.298534] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.298624] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.298708] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.298815] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.298899] pnp 00:08: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
[    0.299454] pnp: PnP ACPI: found 9 devices
[    0.299600] ACPI: bus type PNP unregistered
[    0.310310] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.310469] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.310638] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.310794] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.310963] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.310968] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.310971] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.310975] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[    0.310979] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[    0.310983] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.310987] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.311042] NET: Registered protocol family 2
[    0.311515] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.312301] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.312724] TCP: Hash tables configured (established 131072 bind 65536)
[    0.312915] TCP: reno registered
[    0.313096] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.313367] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.313667] NET: Registered protocol family 1
[    0.313925] RPC: Registered named UNIX socket transport module.
[    0.314076] RPC: Registered udp transport module.
[    0.314223] RPC: Registered tcp transport module.
[    0.314369] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.314532] pci 0000:00:02.0: Boot video device
[    0.314722] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
[    0.314962] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
[    0.315716] PCI: CLS 64 bytes, default 64
[    0.315789] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.315944] software IO TLB [mem 0xcb82f000-0xcf82f000] (64MB) mapped at [ffff8800cb82f000-ffff8800cf82efff]
[    0.322885] VFS: Disk quotas dquot_6.5.2
[    0.323137] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.324845] NFS: Registering the id_resolver key type
[    0.325007] Key type id_resolver registered
[    0.325152] Key type id_legacy registered
[    0.325300] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.325475] NTFS driver 2.1.30 [Flags: R/W].
[    0.325965] fuse init (API version 7.22)
[    0.326432] msgmni has been set to 31534
[    0.327247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.327487] io scheduler noop registered
[    0.327711] io scheduler cfq registered (default)
[    0.328614] intel_idle: MWAIT substates: 0x42120
[    0.328617] intel_idle: v0.4 model 0x3C
[    0.328620] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.329217] ACPI: AC Adapter [AC] (on-line)
[    0.329670] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.330063] ACPI: Lid Switch [LID]
[    0.330307] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.330553] ACPI: Sleep Button [SLPB]
[    0.330845] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.331085] ACPI: Power Button [PWRF]
[    0.333153] thermal LNXTHERM:00: registered as thermal_zone0
[    0.333305] ACPI: Thermal Zone [THM0] (52 C)
[    0.334262] GHES: HEST is not enabled!
[    0.342503] ACPI: Battery Slot [BAT0] (battery present)
[    0.369717] Non-volatile memory driver v1.3
[    0.369869] Linux agpgart interface v0.103
[    0.370073] [drm] Initialized drm 1.1.0 20060810
[    0.371713] loop: module loaded
[    0.372026] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
[    0.372401] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.372657] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[    0.373012] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.373260] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[    0.373614] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.373862] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.376761] ahci 0000:00:1f.2: version 3.0
[    0.376958] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    0.377046] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x20 impl SATA mode
[    0.377293] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst
[    0.379092] scsi0 : ahci
[    0.379407] scsi1 : ahci
[    0.379699] scsi2 : ahci
[    0.379989] scsi3 : ahci
[    0.380279] scsi4 : ahci
[    0.380565] scsi5 : ahci
[    0.380828] ata1: DUMMY
[    0.380968] ata2: DUMMY
[    0.381107] ata3: DUMMY
[    0.381247] ata4: DUMMY
[    0.381386] ata5: DUMMY
[    0.381529] ata6: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c380 irq 40
[    0.382000] tun: Universal TUN/TAP device driver, 1.6
[    0.382174] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.382678] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.382828] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    0.383265] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.383541] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    0.550149] e1000e 0000:00:19.0 eth0: registered PHC clock
[    0.550308] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:2c:fd:f6
[    0.550549] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.550740] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    0.550991] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    0.551142] Copyright(c) 2003-2013 Intel Corporation
[    0.551614] iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.551850] iwlwifi 0000:03:00.0: Direct firmware load failed with error -2
[    0.552006] iwlwifi 0000:03:00.0: Falling back to user helper
[    0.552332] hso: drivers/net/usb/hso.c: Option Wireless
[    0.552587] usbcore: registered new interface driver hso
[    0.552829] usbcore: registered new interface driver cdc_ether
[    0.553062] usbcore: registered new interface driver r815x
[    0.553296] usbcore: registered new interface driver cdc_eem
[    0.553531] usbcore: registered new interface driver rndis_host
[    0.553773] usbcore: registered new interface driver cdc_subset
[    0.554016] usbcore: registered new interface driver cdc_ncm
[    0.554395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.554548] ehci-pci: EHCI PCI platform driver
[    0.554870] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.555172] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.555429] ehci-pci 0000:00:1a.0: debug port 2
[    0.559499] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.559522] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf063e000
[    0.568802] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.569016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.569170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.569407] usb usb1: Product: EHCI Host Controller
[    0.569555] usb usb1: Manufacturer: Linux 3.13.0-rc3danvet-11323-g74011e3-dirty ehci_hcd
[    0.569795] usb usb1: SerialNumber: 0000:00:1a.0
[    0.570287] hub 1-0:1.0: USB hub found
[    0.570439] hub 1-0:1.0: 3 ports detected
[    0.570912] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.571207] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.571467] ehci-pci 0000:00:1d.0: debug port 2
[    0.575524] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.575548] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000
[    0.585464] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.585669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.585824] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.586061] usb usb2: Product: EHCI Host Controller
[    0.586209] usb usb2: Manufacturer: Linux 3.13.0-rc3danvet-11323-g74011e3-dirty ehci_hcd
[    0.586449] usb usb2: SerialNumber: 0000:00:1d.0
[    0.586937] hub 2-0:1.0: USB hub found
[    0.587087] hub 2-0:1.0: 3 ports detected
[    0.587614] usbcore: registered new interface driver usb-storage
[    0.587917] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.590258] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.590412] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.590874] mousedev: PS/2 mouse device common for all mice
[    0.591639] usbcore: registered new interface driver synaptics_usb
[    0.591843] rtc_cmos 00:06: RTC can wake from S4
[    0.592280] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.592496] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.592848] i2c /dev entries driver
[    0.592871] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.593505] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    0.594052] usbcore: registered new interface driver uvcvideo
[    0.594204] USB Video Class driver (1.1.1)
[    0.596402] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    0.596589] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    0.597032] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    0.598139] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.598533] usbcore: registered new interface driver btusb
[    0.598691] Intel P-state driver initializing.
[    0.598874] Intel pstate controlling: cpu 0
[    0.598991] Intel pstate controlling: cpu 1
[    0.599135] sdhci: Secure Digital Host Controller Interface driver
[    0.599235] sdhci: Copyright(c) Pierre Ossman
[    0.599413] hidraw: raw HID events driver (C) Jiri Kosina
[    0.599849] usbcore: registered new interface driver usbhid
[    0.599947] usbhid: USB HID core driver
[    0.600109] TCP: cubic registered
[    0.600204] NET: Registered protocol family 17
[    0.600313] Key type dns_resolver registered
[    0.600908] rtc_cmos 00:06: setting system clock to 2013-12-17 18:09:36 UTC (1387303776)
[    0.601080] ALSA device list:
[    0.601173]   No soundcards found.
[    0.601286] Waiting 8 sec before mounting root device...
[    0.698858] ata6: SATA link down (SStatus 0 SControl 300)
[    0.875572] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.999354] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    0.999455] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.999939] hub 1-1:1.0: USB hub found
[    1.000184] hub 1-1:1.0: 6 ports detected
[    1.105594] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.229405] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.229506] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.230000] hub 2-1:1.0: USB hub found
[    1.230236] hub 2-1:1.0: 8 ports detected
[    1.299175] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[    1.318992] tsc: Refined TSC clocksource calibration: 2893.300 MHz
[    1.384162] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc
[    1.384264] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.398225] Bluetooth: hci0: read Intel version: 370710018002030d00
[    1.398344] bluetooth hci0: Direct firmware load failed with error -2
[    1.398438] bluetooth hci0: Falling back to user helper
[    1.462369] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2722, fw id: 1484859
[    1.462537] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    1.462635] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    1.501234] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    1.614493] usb 1-1.6: New USB device found, idVendor=5986, idProduct=0268
[    1.614590] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.614735] usb 1-1.6: Product: Integrated Camera
[    1.614825] usb 1-1.6: Manufacturer: SunplusIT INC.
[    1.685123] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0268)
[    1.694174] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[    1.772525] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[    1.857297] usb 2-1.2: New USB device found, idVendor=1058, idProduct=0704
[    1.857395] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.857540] usb 2-1.2: Product: External HDD
[    1.857630] usb 2-1.2: Manufacturer: Western Digital
[    1.857721] usb 2-1.2: SerialNumber: 57442D57584E313039534535353835
[    1.858268] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[    1.858458] usb-storage 2-1.2:1.0: Quirks match for vid 1058 pid 0704: 8000
[    1.858644] scsi6 : usb-storage 2-1.2:1.0
[    1.925938] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[    2.011579] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1012
[    2.011675] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.011822] usb 2-1.5: Product: Lenovo ThinkPad Dock
[    2.011913] usb 2-1.5: Manufacturer: LENOVO
[    2.012563] hub 2-1.5:1.0: USB hub found
[    2.012953] hub 2-1.5:1.0: 4 ports detected
[    2.299520] usb 2-1.5.4: new high-speed USB device number 5 using ehci-pci
[    2.319309] Switched to clocksource tsc
[    2.396745] usb 2-1.5.4: New USB device found, idVendor=17ef, idProduct=1011
[    2.396844] usb 2-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.396991] usb 2-1.5.4: Product: Lenovo ThinkPad Dock
[    2.397082] usb 2-1.5.4: Manufacturer: Lenovo
[    2.397171] usb 2-1.5.4: SerialNumber: Rev1.2
[    2.397619] hub 2-1.5.4:1.0: USB hub found
[    2.397869] hub 2-1.5.4:1.0: 3 ports detected
[    2.860034] scsi 6:0:0:0: Direct-Access     WD       5000BMV External 1.75 PQ: 0 ANSI: 4
[    2.860665] sd 6:0:0:0: Attached scsi generic sg0 type 0
[    2.861100] sd 6:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.861874] sd 6:0:0:0: [sda] Write Protect is off
[    2.863498] sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00
[    2.864098] sd 6:0:0:0: [sda] No Caching mode page found
[    2.864188] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    2.866349] sd 6:0:0:0: [sda] No Caching mode page found
[    2.866442] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    3.209235]  sda: sda1 sda2 < sda5 sda6 >
[    3.212068] sd 6:0:0:0: [sda] No Caching mode page found
[    3.212161] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    3.212256] sd 6:0:0:0: [sda] Attached SCSI disk
[    8.604318] EXT3-fs (sda6): error: couldn't mount because of unsupported optional features (240)
[    8.605266] EXT4-fs (sda6): couldn't mount as ext2 due to feature incompatibilities
[    8.672058] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    8.672212] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
[    8.722464] devtmpfs: mounted
[    8.722855] Freeing unused kernel memory: 812K (ffffffff81872000 - ffffffff8193d000)
[    9.859218] random: nonblocking pool is initialized
[   10.861982] systemd-udevd[1614]: starting version 208
[   11.253775] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq(-2)
[   11.253782] bluetooth hci0: Direct firmware load failed with error -2
[   11.253783] bluetooth hci0: Falling back to user helper
[   11.279431] iwlwifi 0000:03:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm
[   11.279437] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[   11.279498] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   11.279655] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   11.441660] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   11.441662] thinkpad_acpi: http://ibm-acpi.sf.net/
[   11.441663] thinkpad_acpi: ThinkPad BIOS GLET42WW (1.17 ), EC unknown
[   11.441663] thinkpad_acpi: Lenovo ThinkPad T440p, model 20ANCTO1WW
[   11.444180] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[   11.444191] thinkpad_acpi: radio switch found; radios are enabled
[   11.444244] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   11.444245] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   11.445181] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   11.445492] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   11.445568] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   11.446572] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[   11.472044] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   11.477220] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.7.bseq
[   11.587957] systemd-udevd[1635]: renamed network interface wlan0 to wlp3s0
[   11.605363] systemd-udevd[1631]: renamed network interface eth0 to enp0s25
[   11.810301] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   11.981252] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.981291] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.982014] [drm] Memory usable by graphics device = 2048M
[   12.014731] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[   12.014737] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.014738] [drm] Driver supports precise vblank timestamp query.
[   12.014784] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.072987] systemd-sysctl[1651]: Overwriting earlier assignment of kernel/sysrq in file '/usr/lib64/sysctl.d/60-gentoo.conf'.
[   12.072989] systemd-sysctl[1650]: Overwriting earlier assignment of kernel/sysrq in file '/usr/lib64/sysctl.d/60-gentoo.conf'.
[   12.298079] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   12.312581] fbcon: inteldrmfb (fb0) is primary device
[   13.351775] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   13.627998] Console: switching to colour frame buffer device 240x67
[   13.630781] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.630782] i915 0000:00:02.0: registered panic notifier
[   13.668675] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   13.709147] acpi device:01: registered as cooling_device3
[   13.709257] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   13.709356] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.717989] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
[   13.776582] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input14
[   13.776614] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input13
[   13.776634] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12
[   15.139520] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[   19.792767] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   19.893175] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   19.894734] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   19.894928] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   27.440671] wlp3s0: authenticate with bc:05:43:16:ff:44
[   27.442444] wlp3s0: send auth to bc:05:43:16:ff:44 (try 1/3)
[   27.444342] wlp3s0: authenticated
[   27.444776] wlp3s0: associate with bc:05:43:16:ff:44 (try 1/3)
[   27.454257] wlp3s0: RX AssocResp from bc:05:43:16:ff:44 (capab=0x411 status=0 aid=1)
[   27.455860] wlp3s0: associated
[   27.550982] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by bc:05:43:16:ff:44
[   83.602358] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[  241.527881] usb 2-1.5: USB disconnect, device number 4
[  241.527884] usb 2-1.5.4: USB disconnect, device number 5
[  242.059271] thinkpad_acpi: undocked from hotplug port replicator
[  245.580026] thinkpad_acpi: docked into hotplug port replicator
[  246.833689] usb 2-1.5: new high-speed USB device number 6 using ehci-pci
[  246.919475] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1012
[  246.919478] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  246.919479] usb 2-1.5: Product: Lenovo ThinkPad Dock
[  246.919480] usb 2-1.5: Manufacturer: LENOVO
[  246.920118] hub 2-1.5:1.0: USB hub found
[  246.920342] hub 2-1.5:1.0: 4 ports detected
[  247.207461] usb 2-1.5.4: new high-speed USB device number 7 using ehci-pci
[  247.304673] usb 2-1.5.4: New USB device found, idVendor=17ef, idProduct=1011
[  247.304676] usb 2-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  247.304677] usb 2-1.5.4: Product: Lenovo ThinkPad Dock
[  247.304678] usb 2-1.5.4: Manufacturer: Lenovo
[  247.304679] usb 2-1.5.4: SerialNumber: Rev1.2
[  247.305269] hub 2-1.5.4:1.0: USB hub found
[  247.305401] hub 2-1.5.4:1.0: 3 ports detected
[