rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff77000 (usable)
[ 0.000000] BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff79000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1ff77 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001ff77000 (usable)
[ 0.000000] modified: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
[ 0.000000] modified: 000000001ff79000 - 0000000020000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001ff77000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001ff77000 page 4k
[ 0.000000] kernel direct mapping tables up to 1ff77000 @ 7000-c000
[ 0.000000] RAMDISK: 17350000 - 17fd913a
[ 0.000000] ACPI: RSDP 000fd560 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fd574 00034 (v01 DELL GX240 00000007 ASL 00000061)
[ 0.000000] ACPI: FACP 000fd5a8 00074 (v01 DELL GX240 00000007 ASL 00000061)
[ 0.000000] ACPI: DSDT fffe3c22 02370 (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 1ff77000 00040
[ 0.000000] ACPI: SSDT fffe5f92 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: APIC 000fd61c 0005C (v01 DELL GX240 00000007 ASL 00000061)
[ 0.000000] ACPI: BOOT 000fd678 00028 (v01 DELL GX240 00000007 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ff77000
[ 0.000000] low ram: 0 - 1ff77000
[ 0.000000] node 0 low ram: 00000000 - 1ff77000
[ 0.000000] node 0 bootmap 00008000 - 0000bff0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ff77000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8]
[ 0.000000] #4 [0017350000 - 0017fd913a] RAMDISK ==> [0017350000 - 0017fd913a]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008b1000 - 00008b4160] BRK ==> [00008b1000 - 00008b4160]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000]
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ff77
[ 0.000000] HighMem 0x0001ff77 -> 0x0001ff77
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0001ff77
[ 0.000000] On node 0 totalpages: 130835
[ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3964 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125848 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @c1800000 s74936 r0 d23368 u2097152
[ 0.000000] pcpu-alloc: s74936 r0 d23368 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129812
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=26f7acf9-20be-408d-b7f2-407712df8971 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2618700 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 494984k/523740k available (4539k kernel code, 28012k reserved, 1928k data, 620k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe0777000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdff77000 ( 511 MB)
[ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB)
[ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB)
[ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] I-pipe 2.6-03: pipeline enabled.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2691.542 MHz processor.
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 5383.08 BogoMIPS (lpj=10766168)
[ 0.004066] Security Framework initialized
[ 0.004119] AppArmor: AppArmor initialized
[ 0.004145] Mount-cache hash table entries: 512
[ 0.004516] Initializing cgroup subsys ns
[ 0.004535] Initializing cgroup subsys cpuacct
[ 0.004546] Initializing cgroup subsys memory
[ 0.004564] Initializing cgroup subsys devices
[ 0.004569] Initializing cgroup subsys freezer
[ 0.004574] Initializing cgroup subsys net_cls
[ 0.004633] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004642] CPU: L2 cache: 128K
[ 0.004646] CPU: Hyper-Threading is disabled
[ 0.004654] mce: CPU supports 4 MCE banks
[ 0.004674] CPU0: Thermal monitoring enabled (TM1)
[ 0.004704] Performance Events: no PMU driver, software events only.
[ 0.004723] Checking 'hlt' instruction... OK.
[ 0.021404] SMP alternatives: switching to UP code
[ 0.034218] ACPI: Core revision 20090903
[ 0.072034] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.072057] ftrace: allocating 21003 entries in 42 pages
[ 0.085551] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.085888] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.088001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.088001] ..... (found apic 0 pin 2) ...
[ 0.129366] ....... works.
[ 0.129373] CPU0: Intel(R) Celeron(R) CPU 2.70GHz stepping 09
[ 0.132001] Brought up 1 CPUs
[ 0.132001] Total of 1 processors activated (5383.08 BogoMIPS).
[ 0.132001] CPU0 attaching NULL sched-domain.
[ 0.132001] devtmpfs: initialized
[ 0.132001] regulator: core version 0.5
[ 0.132001] NET: Registered protocol family 16
[ 0.132001] EISA bus registered
[ 0.132001] ACPI: bus type pci registered
[ 0.157558] PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=2
[ 0.157565] PCI: Using configuration type 1 for base access
[ 0.159442] bio: create slab <bio-0> at 0
[ 0.160490] ACPI: EC: Look up EC in DSDT
[ 0.183132] ACPI: Interpreter enabled
[ 0.183141] ACPI: (supports S0 S5)
[ 0.183173] ACPI: Using IOAPIC for interrupt routing
[ 0.209722] ACPI: No dock devices found.
[ 0.209787] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.209900] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff]
[ 0.210119] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.210127] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
[ 0.210181] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.210249] pci 0000:00:1f.2: reg 20 io port: [0xff80-0xff9f]
[ 0.210315] pci 0000:00:1f.3: reg 20 io port: [0xccd0-0xccdf]
[ 0.210381] pci 0000:00:1f.4: reg 20 io port: [0xff60-0xff7f]
[ 0.210425] pci 0000:00:1f.5: reg 10 io port: [0xc800-0xc8ff]
[ 0.210435] pci 0000:00:1f.5: reg 14 io port: [0xcc40-0xcc7f]
[ 0.210524] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.210534] pci 0000:01:00.0: reg 14 io port: [0xec00-0xecff]
[ 0.210542] pci 0000:01:00.0: reg 18 32bit mmio: [0xff9fc000-0xff9fffff]
[ 0.210563] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x80000000-0x8001ffff]
[ 0.210591] pci 0000:01:00.0: supports D1
[ 0.210638] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.210643] pci 0000:00:01.0: bridge 32bit mmio: [0xff900000-0xffafffff]
[ 0.210648] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.210708] pci 0000:02:0c.0: reg 10 io port: [0xdc80-0xdcff]
[ 0.210717] pci 0000:02:0c.0: reg 14 32bit mmio: [0xff7ffc00-0xff7ffc7f]
[ 0.210746] pci 0000:02:0c.0: reg 30 32bit mmio pref: [0xff800000-0xff81ffff]
[ 0.210768] pci 0000:02:0c.0: supports D1 D2
[ 0.210771] pci 0000:02:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.210777] pci 0000:02:0c.0: PME# disabled
[ 0.210812] pci 0000:00:1e.0: transparent bridge
[ 0.210818] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.210824] pci 0000:00:1e.0: bridge 32bit mmio: [0xff700000-0xff8fffff]
[ 0.210842] pci_bus 0000:00: on NUMA node 0
[ 0.210861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.211299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.228779] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.229236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.229680] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.230124] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.230561] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.230999] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.231441] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.231884] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.232312] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.232321] vgaarb: loaded
[ 0.232662] SCSI subsystem initialized
[ 0.232949] libata version 3.00 loaded.
[ 0.233312] usbcore: registered new interface driver usbfs
[ 0.233349] usbcore: registered new interface driver hub
[ 0.233511] usbcore: registered new device driver usb
[ 0.234105] ACPI: WMI: Mapper loaded
[ 0.234115] PCI: Using ACPI for IRQ routing
[ 0.234449] NetLabel: Initializing
[ 0.234458] NetLabel: domain hash size = 128
[ 0.234461] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.234495] NetLabel: unlabeled traffic allowed by default
[ 0.234634] Switching to clocksource tsc
[ 0.236001] AppArmor: AppArmor Filesystem Enabled
[ 0.236001] pnp: PnP ACPI init
[ 0.236001] ACPI: bus type pnp registered
[ 0.260687] pnp 00:0c: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.260696] pnp 00:0c: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.261776] pnp: PnP ACPI: found 13 devices
[ 0.261786] ACPI: ACPI bus type pnp unregistered
[ 0.261795] PnPBIOS: Disabled by ACPI PNP
[ 0.261835] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.261842] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 0.261849] system 00:00: iomem range 0x1000000-0x1ff76fff could not be reserved
[ 0.261854] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.261859] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.261863] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.261867] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.261871] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.261893] system 00:0c: ioport range 0xc00-0xc7f has been reserved
[ 0.296998] pci 0000:01:00.0: BAR 6: no parent found for of device [0x80000000-0x8001ffff]
[ 0.297010] pci 0000:02:0c.0: BAR 6: address space collision on of device [0xff800000-0xff81ffff]
[ 0.297041] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.297046] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.297052] pci 0000:00:01.0: MEM window: 0xff900000-0xffafffff
[ 0.297057] pci 0000:00:01.0: PREFETCH window: 0xf8000000-0xfbffffff
[ 0.297065] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.297070] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.297077] pci 0000:00:1e.0: MEM window: 0xff700000-0xff8fffff
[ 0.297082] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x200fffff
[ 0.297110] pci 0000:00:1e.0: setting latency timer to 64
[ 0.297117] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.297124] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.297176] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.297182] pci_bus 0000:01: resource 1 mem: [0xff900000-0xffafffff]
[ 0.297186] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xfbffffff]
[ 0.297190] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.297193] pci_bus 0000:02: resource 1 mem: [0xff700000-0xff8fffff]
[ 0.297196] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x200fffff]
[ 0.297200] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.297203] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.297285] NET: Registered protocol family 2
[ 0.297482] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.298000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.298229] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.298568] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.298576] TCP reno registered
[ 0.298908] NET: Registered protocol family 1
[ 0.299008] pci 0000:01:00.0: Boot video device
[ 0.299248] Simple Boot Flag at 0x7a set to 0x1
[ 0.299500] Scanning for low memory corruption every 60 seconds
[ 0.299784] audit: initializing netlink socket (disabled)
[ 0.299830] type=2000 audit(1387190984.297:1): initialized
[ 0.307307] Trying to unpack rootfs image as initramfs...
[ 0.317463] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.320227] VFS: Disk quotas dquot_6.5.2
[ 0.320414] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.325625] fuse init (API version 7.13)
[ 0.325956] msgmni has been set to 967
[ 0.333274] alg: No test for stdrng (krng)
[ 0.333573] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.333583] io scheduler noop registered
[ 0.333586] io scheduler anticipatory registered
[ 0.333589] io scheduler deadline registered
[ 0.333710] io scheduler cfq registered (default)
[ 0.333992] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.334047] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.334199] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.334218] ACPI: Power Button [VBTN]
[ 0.334336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.334344] ACPI: Power Button [PWRF]
[ 0.337341] isapnp: Scanning for PnP cards...
[ 0.345514] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.345687] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.345893] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.346638] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.346972] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.397986] brd: module loaded
[ 0.399518] loop: module loaded
[ 0.399873] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.400178] ata_piix 0000:00:1f.1: version 2.13
[ 0.400316] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.405488] scsi0 : ata_piix
[ 0.405913] scsi1 : ata_piix
[ 0.406029] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.406036] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.406970] Fixed MDIO Bus: probed
[ 0.407096] PPP generic driver version 2.4.2
[ 0.407279] tun: Universal TUN/TAP device driver, 1.6
[ 0.407286] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.407633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.407692] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.407726] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.407854] alloc irq_desc for 19 on node -1
[ 0.407861] alloc kstat_irqs on node -1
[ 0.407877] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.407899] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 0.407907] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 0.408114] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 0.408180] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80
[ 0.408495] usb usb1: configuration #1 chosen from 1 choice
[ 0.408576] hub 1-0:1.0: USB hub found
[ 0.408609] hub 1-0:1.0: 2 ports detected
[ 0.408736] alloc irq_desc for 23 on node -1
[ 0.408743] alloc kstat_irqs on node -1
[ 0.408760] uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 0.408779] uhci_hcd 0000:00:1f.4: setting latency timer to 64
[ 0.408784] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 0.408945] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 0.409027] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000ff60
[ 0.413792] usb usb2: configuration #1 chosen from 1 choice
[ 0.413880] hub 2-0:1.0: USB hub found
[ 0.413920] hub 2-0:1.0: 2 ports detected
[ 0.414142] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.416812] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.416838] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.417399] mice: PS/2 mouse device common for all mice
[ 0.421552] rtc_cmos 00:05: RTC can wake from S4
[ 0.421766] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.421815] rtc0: alarms up to one day, 242 bytes nvram
[ 0.422168] device-mapper: uevent: version 1.0.3
[ 0.422645] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.425520] device-mapper: multipath: version 1.1.0 loaded
[ 0.425536] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.426126] EISA: Probing bus 0 at eisa.0
[ 0.426172] EISA: Detected 0 cards.
[ 0.426179] cpuidle: using governor ladder
[ 0.426183] cpuidle: using governor menu
[ 0.426929] TCP cubic registered
[ 0.427292] NET: Registered protocol family 10
[ 0.428299] lo: Disabled Privacy Extensions
[ 0.428830] NET: Registered protocol family 17
[ 0.428954] Using IPI No-Shortcut mode
[ 0.433770] registered taskstats version 1
[ 0.434078] rtc_cmos 00:05: setting system clock to 2013-12-16 10:49:44 UTC (1387190984)
[ 0.434085] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.434089] EDD information not available.
[ 0.456725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.597898] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 0.597905] ata1.00: 160086528 sectors, multi 8: LBA
[ 0.614092] ata1.00: configured for UDMA/100
[ 0.630080] ata2.00: ATAPI: _NEC CD-RW NR-7900A, 1.08, max UDMA/33
[ 0.681678] ata2.00: configured for UDMA/33
[ 1.028932] isapnp: No Plug & Play device found
[ 1.029394] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.029838] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.030464] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.030721] sd 0:0:0:0: [sda] Write Protect is off
[ 1.030729] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.030858] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.031565] sda:
[ 1.063223] scsi 1:0:0:0: CD-ROM _NEC NR-7900A 1.08 PQ: 0 ANSI: 5
[ 1.068577] sda1 sda2 <sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.069617] Uniform CD-ROM driver Revision: 3.20
[ 1.069972] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.070178] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.084454] sda5 sda6 >
[ 1.107280] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.317551] Freeing initrd memory: 12836k freed
[ 1.354618] Freeing unused kernel memory: 620k freed
[ 1.356495] Write protecting the kernel text: 4540k
[ 1.356531] Write protecting the kernel read-only data: 1668k
[ 1.431056] udev: starting version 151
[ 1.957284] Linux agpgart interface v0.103
[ 1.984133] FDC 0 is a post-1991 82077
[ 2.000857] alloc irq_desc for 18 on node -1
[ 2.000866] alloc kstat_irqs on node -1
[ 2.000884] 3c59x 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.000927] 3c59x: Donald Becker and others.
[ 2.000942] 0000:02:0c.0: 3Com PCI 3c905C Tornado at e0826c00.
[ 2.025000] vga16fb: initializing
[ 2.025017] vga16fb: mapped to 0xc00a0000
[ 2.025506] fb0: VGA16 VGA frame buffer device
[ 2.038018] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 2.059205] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 2.335655] Console: switching to colour frame buffer device 80x30
[ 2.859112] xor: automatically using best checksumming function: pIII_sse
[ 2.876021] pIII_sse : 3520.000 MB/sec
[ 2.876027] xor: using function: pIII_sse (3520.000 MB/sec)
[ 2.905219] device-mapper: dm-raid45: initialized v0.2594b
[ 3.162264] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 3.162277] EXT4-fs (sda5): write access will be enabled during recovery
[ 3.548005] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 3.548106] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1177601
[ 3.548327] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1177600
[ 3.548386] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1177596
[ 3.548436] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1177595
[ 3.548476] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1177565
[ 3.548521] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1177564
[ 3.548562] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1177599
[ 3.548602] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1177598
[ 3.548651] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1570080
[ 3.548705] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1570032
[ 3.548743] EXT4-fs (sda5): 10 orphan inodes deleted
[ 3.548750] EXT4-fs (sda5): recovery complete
[ 4.647568] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 12.439210] Adding 1486840k swap on /dev/sda6. Priority:-1 extents:1 across:1486840k
[ 12.495196] udev: starting version 151
[ 12.671892] lp: driver loaded but no devices found
[ 12.798597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.831303] intel_rng: FWH not detected
[ 13.209232] parport_pc 00:0b: reported by Plug and Play ACPI
[ 13.209297] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 13.288437] lp0: using parport0 (interrupt-driven).
[ 13.364647] psmouse serio1: ID: 00 00 28
[ 13.665369] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 13.699889] dell-wmi: No known WMI GUID found
[ 13.714549] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input4
[ 14.049714] type=1505 audit(1387190998.113:2): operation="profile_load" pid=450 name="/sbin/dhclient3"
[ 14.050459] type=1505 audit(1387190998.113:3): operation="profile_load" pid=450 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.050896] type=1505 audit(1387190998.113:4): operation="profile_load" pid=450 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.065308] ppdev: user-space parallel port driver
[ 14.776618] alloc irq_desc for 17 on node -1
[ 14.776626] alloc kstat_irqs on node -1
[ 14.776644] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.776686] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 15.191551] type=1505 audit(1387190999.253:5): operation="profile_load" pid=612 name="/usr/share/gdm/guest-session/Xsession"
[ 15.242043] type=1505 audit(1387190999.305:6): operation="profile_replace" pid=613 name="/sbin/dhclient3"
[ 15.242853] type=1505 audit(1387190999.305:7): operation="profile_replace" pid=613 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.243330] type=1505 audit(1387190999.305:8): operation="profile_replace" pid=613 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.407679] type=1505 audit(1387190999.469:9): operation="profile_load" pid=616 name="/usr/bin/evince"
[ 15.412107] intel8x0_measure_ac97_clock: measured 55887 usecs (3130 samples)
[ 15.412115] intel8x0: clocking to 41139
[ 15.492166] type=1505 audit(1387190999.557:10): operation="profile_load" pid=616 name="/usr/bin/evince-previewer"
[ 15.502703] eth0: setting full-duplex.
[ 15.551325] type=1505 audit(1387190999.613:11): operation="profile_load" pid=616 name="/usr/bin/evince-thumbnailer"
[ 18.551759] [drm] Initialized drm 1.1.0 20060810
[ 18.559383] alloc irq_desc for 16 on node -1
[ 18.559392] alloc kstat_irqs on node -1
[ 18.559410] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.562862] [drm] Initialized r128 2.5.0 20030725 for 0000:01:00.0 on minor 0
[ 18.565588] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 18.565621] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
[ 18.565648] pci 0000:01:00.0: putting AGP V2 device into 1x mode
[ 18.605122] platform r128_cce.0: firmware: requesting r128/r128_cce.bin
[ 25.980040] eth0: no IPv6 routers present