rendered paste bodyLinux version 2.6.34-gentoo-r6 (root@localhost) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #2 PREEMPT Tue Sep 14 17:53:01 MSD 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017fec000 (usable)
BIOS-e820: 0000000017fec000 - 0000000017fef000 (ACPI data)
BIOS-e820: 0000000017fef000 - 0000000017fff000 (reserved)
BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x17fec max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 018000000 mask FF8000000 uncachable
2 base 0F8000000 mask FFC000000 write-combining
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-0000000017fec000
0000000000 - 0000400000 page 4k
0000400000 - 0017c00000 page 2M
0017c00000 - 0017fec000 page 4k
kernel direct mapping tables up to 17fec000 @ 7000-c000
ACPI: RSDP 000f5320 00014 (v00 ASUS )
ACPI: RSDT 17fec000 00030 (v01 ASUS P4PE-X 42302E31 MSFT 31313031)
ACPI: FACP 17fec0c0 00074 (v01 ASUS P4PE-X 42302E31 MSFT 31313031)
ACPI: DSDT 17fec134 02A43 (v01 ASUS P4PE-X 00001000 MSFT 0100000B)
ACPI: FACS 17fff000 00040
ACPI: BOOT 17fec030 00028 (v01 ASUS P4PE-X 42302E31 MSFT 31313031)
ACPI: APIC 17fec058 0005A (v01 ASUS P4PE-X 42302E31 MSFT 31313031)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
383MB LOWMEM available.
mapped low ram: 0 - 17fec000
low ram: 0 - 17fec000
node 0 low ram: 00000000 - 17fec000
node 0 bootmap 00008000 - 0000b000
(6/32 early reservations) ==> bootmem [0000000000 - 0017fec000]
#0 [0001000000 - 000135afcc] TEXT DATA BSS ==> [0001000000 - 000135afcc]
#1 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#2 [000135b000 - 0001361134] BRK ==> [000135b000 - 0001361134]
#3 [0000001000 - 0000005000] ACPI WAKEUP ==> [0000001000 - 0000005000]
#4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#5 [0000008000 - 000000b000] BOOTMAP ==> [0000008000 - 000000b000]
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x00017fec
HighMem empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x00017fec
On node 0 totalpages: 98186
free_area_init_node: node 0, pgdat c12cf880, node_mem_map c1363020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3966 pages, LIFO batch:0
Normal zone: 736 pages used for memmap
Normal zone: 93452 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Using ACPI (MADT) for SMP configuration information
nr_irqs_gsi: 24
Allocating PCI resources starting at 18000000 (gap: 18000000:e6c00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97418
Kernel command line: root=/dev/sda3 video="radeonfb:1024x768@75"
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 385784k/393136k available (2113k kernel code, 6960k reserved, 771k data, 268k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd87ec000 - 0xff7fe000 ( 624 MB)
lowmem : 0xc0000000 - 0xd7fec000 ( 383 MB)
.init : 0xc12d2000 - 0xc1315000 ( 268 kB)
.data : 0xc12107f1 - 0xc12d1798 ( 771 kB)
.text : 0xc1000000 - 0xc12107f1 (2113 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2606.196 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5212.39 BogoMIPS (lpj=2606196)
Mount-cache hash table entries: 512
Performance Events: no PMU driver, software events only.
CPU: Intel(R) Celeron(R) CPU 2.60GHz stepping 09
Checking 'hlt' instruction... OK.
ACPI: Core revision 20100121
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1e40, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x18000000-0xfebfffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:1d.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: reg 20: [io 0xb000-0xb01f]
pci 0000:00:1d.7: reg 10: [mem 0xde000000-0xde0003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: [io 0xe400-0xe47f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0xec00-0xec3f] claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.3: reg 20: [io 0xe800-0xe81f]
pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xd800-0xd8ff]
pci 0000:01:00.0: reg 18: [mem 0xdf000000-0xdf00ffff]
pci 0000:01:00.0: reg 30: [mem 0xeffe0000-0xefffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xde800000-0xde80ffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xde800000-0xdfdfffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
pci 0000:02:0c.0: reg 10: [mem 0xdd800000-0xdd800fff]
pci 0000:02:0c.0: reg 14: [io 0xa800-0xa83f]
pci 0000:02:0c.0: reg 18: [mem 0xdd000000-0xdd0fffff]
pci 0000:02:0c.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:02:0c.0: supports D1 D2
pci 0000:02:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0c.0: PME# disabled
pci 0000:02:0d.0: reg 10: [io 0xa400-0xa47f]
pci 0000:02:0d.0: reg 14: [mem 0xdc800000-0xdc80007f]
pci 0000:02:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:0d.0: supports D1 D2
pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0d.0: PME# disabled
pci 0000:02:0e.0: reg 10: [io 0xa000-0xa01f]
pci 0000:02:0e.0: supports D1 D2
pci 0000:02:0e.1: reg 10: [io 0x9800-0x9807]
pci 0000:02:0e.1: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x9000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xdc800000-0xddffffff]
pci 0000:00:1e.0: bridge window [mem 0xdfe00000-0xdfffffff pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 0000000017fec000 - 0000000017ffffff
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:02:0c.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:00: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:02:0c.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00100000-0x17ffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [io 0xe400-0xe47f] has been reserved
system 00:02: [io 0xe800-0xe81f] has been reserved
system 00:02: [io 0xec00-0xec3f] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [mem 0xfff80000-0xffffffff] could not be reserved
system 00:02: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x03f0-0x03f1] has been reserved
pci 0000:00:1f.1: BAR 5: assigned [mem 0x18000000-0x180003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0x18000000-0x180003ff] (PCI address [0x18000000-0x180003ff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xde800000-0xdfdfffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
pci 0000:02:0c.0: BAR 6: assigned [mem 0xdfe00000-0xdfefffff pref]
pci 0000:02:0d.0: BAR 6: assigned [mem 0xdff00000-0xdff1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02-02]
pci 0000:00:1e.0: bridge window [io 0x9000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xdc800000-0xddffffff]
pci 0000:00:1e.0: bridge window [mem 0xdfe00000-0xdfffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xde800000-0xdfdfffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
pci_bus 0000:02: resource 0 [io 0x9000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xdc800000-0xddffffff]
pci_bus 0000:02: resource 2 [mem 0xdfe00000-0xdfffffff pref]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
pci 0000:02:0c.0: Firmware left e100 interrupts enabled; disabling
PCI: CLS 32 bytes, default 64
Simple Boot Flag at 0x3a set to 0x1
msgmni has been set to 753
io scheduler noop registered
io scheduler cfq registered (default)
radeonfb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=180.00 MHz
radeonfb: PLL min 20000 max 40000
radeonfb: Monitor 1 type CRT found
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 128x48
radeonfb (0000:01:00.0): ATI Radeon 5960 "Y`"
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata1.00: HPA detected: current 80291135, native 80293248
ata1.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
ata1.00: 80291135 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
ata2.00: ATAPI: LITE-ON COMBO SOHC-5236V, R$09, max UDMA/44
ata2.00: limited to UDMA/33 due to 40-wire cable
sd 0:0:0:0: [sda] 80291135 512-byte logical blocks: (41.1 GB/38.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
ata2.00: configured for UDMA/33
sda1 sda2 <
scsi 1:0:0:0: CD-ROM LITE-ON COMBO SOHC-5236V R$09 PQ: 0 ANSI: 5
sda5 > sda3 sda4
sda: p4 size 2070528 exceeds device capacity, limited to end of disk
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode
VFS: Mounted root (ext2 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 268k freed
Switched to NOHz mode on CPU #0
udev: starting version 151
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xde000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Linux agpgart interface v0.103
3c59x 0000:02:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
3c59x: Donald Becker and others.
0000:02:0d.0: 3Com PCI 3c905C Tornado at d99fc000.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:02:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:02:0c.0: PME# disabled
e100: eth1: e100_probe: addr 0xdd800000, irq 20, MAC addr 00:06:29:77:50:3d
agpgart-intel 0000:00:00.0: Intel 830M Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
EMU10K1_Audigy 0000:02:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Adding 1034904k swap on /dev/sda4. Priority:-1 extents:1 across:1034904k
eth0: setting full-duplex.
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.