rendered paste bodyx3800:/home/niky# dmesg|tail -n 30
[ 1170.804077] ata4: nv: skipping hardreset on occupied port
[ 1172.852037] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1172.967391] ata4.00: configured for UDMA/133
[ 1172.967396] ata4.00: device reported invalid CHS sector 0
[ 1172.967411] ata4: EH complete
[ 1203.804046] ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xe frozen
[ 1203.804053] ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
[ 1203.804057] ata4.00: failed command: WRITE DMA
[ 1203.804065] ata4.00: cmd ca/00:08:b7:4b:ed/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 1203.804066] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x14 (ATA bus error)
[ 1203.804070] ata4.00: status: { DRDY }
[ 1203.804077] ata4: hard resetting link
[ 1203.804080] ata4: nv: skipping hardreset on occupied port
[ 1205.852042] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1205.961585] ata4.00: configured for UDMA/133
[ 1205.961591] ata4.00: device reported invalid CHS sector 0
[ 1205.961606] ata4: EH complete
[ 1236.804046] ata4: limiting SATA link speed to 1.5 Gbps
[ 1236.804053] ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xe frozen
[ 1236.804058] ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
[ 1236.804063] ata4.00: failed command: WRITE DMA
[ 1236.804070] ata4.00: cmd ca/00:08:a7:e4:ed/00:00:00:00:00/e0 tag 0 dma 4096 out
[ 1236.804071] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x14 (ATA bus error)
[ 1236.804075] ata4.00: status: { DRDY }
[ 1236.804082] ata4: hard resetting link
[ 1236.804085] ata4: nv: skipping hardreset on occupied port
[ 1238.852040] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1238.963976] ata4.00: configured for UDMA/133
[ 1238.963981] ata4.00: device reported invalid CHS sector 0
[ 1238.963996] ata4: EH complete
x3800:/home/niky#
_____________________________________________________________
x3800:/home/niky# dmesg |grep sd
[ 2.472814] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.472918] sd 2:0:0:0: [sda] Write Protect is off
[ 2.472957] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.472979] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.473173] sda:
[ 2.473384] sd 3:0:0:0: [sdb] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 2.473509] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.473547] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.473568] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.473732] sdb: sda1 sda2
[ 2.487820] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.499792] sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 > sdb2
[ 2.585371] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.598842] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.598932] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 3.222477] REISERFS (device sdb5): found reiserfs format "3.6" with standard journal
[ 3.222547] REISERFS (device sdb5): using ordered data mode
[ 3.256297] REISERFS (device sdb5): journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 3.257997] REISERFS (device sdb5): checking transaction log (sdb5)
[ 3.281422] REISERFS (device sdb5): Using r5 hash to sort names
[ 7.599886] Adding 248996k swap on /dev/sdb2. Priority:-1 extents:1 across:248996k
[ 8.749241] REISERFS (device sdb6): found reiserfs format "3.6" with standard journal
[ 8.749315] REISERFS (device sdb6): using ordered data mode
[ 8.752883] REISERFS (device sdb6): journal params: device sdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 8.754455] REISERFS (device sdb6): checking transaction log (sdb6)
[ 8.766956] REISERFS (device sdb6): Using r5 hash to sort names
[ 10.707014] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
x3800:/home/niky#
___________________________________________________________________-
x3800:/home/niky# dmesg |grep ata
[ 0.000000] BIOS-e820: 000000006ffb0000 - 000000006ffbe000 (ACPI data)
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] Memory: 1791852k/1834688k available (3051k kernel code, 468k absent, 42368k reserved, 1886k data, 588k init)
[ 1.013279] Write protecting the kernel read-only data: 4204k
[ 1.179165] libata version 3.00 loaded.
[ 1.294746] pata_amd 0000:00:06.0: version 0.4.1
[ 1.294803] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.294880] scsi0 : pata_amd
[ 1.295027] scsi1 : pata_amd
[ 1.295949] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.295990] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.296166] sata_nv 0000:00:08.0: version 3.5
[ 1.296614] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 1.296717] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.296890] scsi2 : sata_nv
[ 1.296999] scsi3 : sata_nv
[ 1.297205] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
[ 1.297247] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
[ 1.460292] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL01, max UDMA/66
[ 1.460357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
[ 1.476234] ata1.00: configured for UDMA/66
[ 1.485485] ata2: port disabled. ignoring.
[ 1.764041] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.806203] ata3.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 1.806243] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.872853] ata3.00: configured for UDMA/133
[ 2.340035] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.393491] ata4.00: HPA detected: current 625140335, native 625142448
[ 2.393535] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 2.393574] ata4.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.460134] ata4.00: configured for UDMA/133
[ 3.222547] REISERFS (device sdb5): using ordered data mode ## estas dos son ya del checkeo de discos ##
[ 8.749315] REISERFS (device sdb6): using ordered data mode