Part of Slepp's ProjectsPastebinTURLImagebinFilebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate
Sign In | Create Account

WDC WD10EADS epic fail
Friday, May 28th, 2010 at 11:16:08am UTC 

  1. [    0.000000] Linux version 2.6.34-v-fox-desktop (root@dfx) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Tue May 18 23:31:33 YEKST 2010
  2. [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.34-v-fox-desktop root=/dev/sda3 ro radeon.modeset=0 modeset=0
  3. [    0.000000] BIOS-provided physical RAM map:
  4. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  5. [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  6. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  7. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fde0000 (usable)
  8. [    0.000000]  BIOS-e820: 000000007fde0000 - 000000007fde3000 (ACPI NVS)
  9. [    0.000000]  BIOS-e820: 000000007fde3000 - 000000007fdf0000 (ACPI data)
  10. [    0.000000]  BIOS-e820: 000000007fdf0000 - 000000007fe00000 (reserved)
  11. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  12. [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  13. [    0.000000] NX (Execute Disable) protection: active
  14. [    0.000000] DMI 2.4 present.
  15. [    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
  16. [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  17. [    0.000000] No AGP bridge found
  18. [    0.000000] last_pfn = 0x7fde0 max_arch_pfn = 0x400000000
  19. [    0.000000] MTRR default type: uncachable
  20. [    0.000000] MTRR fixed ranges enabled:
  21. [    0.000000]   00000-9FFFF write-back
  22. [    0.000000]   A0000-BFFFF uncachable
  23. [    0.000000]   C0000-C7FFF write-protect
  24. [    0.000000]   C8000-FFFFF uncachable
  25. [    0.000000] MTRR variable ranges enabled:
  26. [    0.000000]   0 base 0000000000 mask FF80000000 write-back
  27. [    0.000000]   1 base 007FE00000 mask FFFFE00000 uncachable
  28. [    0.000000]   2 disabled
  29. [    0.000000]   3 disabled
  30. [    0.000000]   4 disabled
  31. [    0.000000]   5 disabled
  32. [    0.000000]   6 disabled
  33. [    0.000000]   7 disabled
  34. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  35. [    0.000000] original variable MTRRs
  36. [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
  37. [    0.000000] reg 1, base: 2046MB, range: 2MB, type UC
  38. [    0.000000] total RAM covered: 2046M
  39. [    0.000000] Found optimal setting for mtrr clean up
  40. [    0.000000]  gran_size: 64K  chunk_size: 4M   num_reg: 2        lose cover RAM: 0G
  41. [    0.000000] New variable MTRRs
  42. [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
  43. [    0.000000] reg 1, base: 2046MB, range: 2MB, type UC
  44. [    0.000000] initial memory mapped : 0 - 20000000
  45. [    0.000000] found SMP MP-table at [ffff8800000f5570] f5570
  46. [    0.000000] init_memory_mapping: 0000000000000000-000000007fde0000
  47. [    0.000000]  0000000000 - 007fc00000 page 2M
  48. [    0.000000]  007fc00000 - 007fde0000 page 4k
  49. [    0.000000] kernel direct mapping tables up to 7fde0000 @ 8000-c000
  50. [    0.000000] ACPI: RSDP 00000000000f6ef0 00014 (v00 GBT   )
  51. [    0.000000] ACPI: RSDT 000000007fde3000 00034 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
  52. [    0.000000] ACPI: FACP 000000007fde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
  53. [    0.000000] ACPI: DSDT 000000007fde30c0 069CD (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
  54. [    0.000000] ACPI: FACS 000000007fde0000 00040
  55. [    0.000000] ACPI: HPET 000000007fde9b80 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
  56. [    0.000000] ACPI: MCFG 000000007fde9bc0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
  57. [    0.000000] ACPI: APIC 000000007fde9ac0 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
  58. [    0.000000] ACPI: Local APIC address 0xfee00000
  59. [    0.000000] Scanning NUMA topology in Northbridge 24
  60. [    0.000000] No NUMA configuration found
  61. [    0.000000] Faking a node at 0000000000000000-000000007fde0000
  62. [    0.000000] Initmem setup node 0 0000000000000000-000000007fde0000
  63. [    0.000000]   NODE_DATA [0000000001b50100 - 0000000001b530ff]
  64. [    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002400000-ffff880003ffffff] on node 0
  65. [    0.000000] Zone PFN ranges:
  66. [    0.000000]   DMA      0x00000001 -> 0x00001000
  67. [    0.000000]   DMA32    0x00001000 -> 0x00100000
  68. [    0.000000]   Normal   empty
  69. [    0.000000] Movable zone start PFN for each node
  70. [    0.000000] early_node_map[2] active PFN ranges
  71. [    0.000000]     0: 0x00000001 -> 0x0000009f
  72. [    0.000000]     0: 0x00000100 -> 0x0007fde0
  73. [    0.000000] On node 0 totalpages: 523646
  74. [    0.000000]   DMA zone: 56 pages used for memmap
  75. [    0.000000]   DMA zone: 0 pages reserved
  76. [    0.000000]   DMA zone: 3942 pages, LIFO batch:0
  77. [    0.000000]   DMA32 zone: 7105 pages used for memmap
  78. [    0.000000]   DMA32 zone: 512543 pages, LIFO batch:31
  79. [    0.000000] Detected use of extended apic ids on hypertransport bus
  80. [    0.000000] ACPI: PM-Timer IO Port: 0x4008
  81. [    0.000000] ACPI: Local APIC address 0xfee00000
  82. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  83. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  84. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
  85. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
  86. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
  87. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
  88. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
  89. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
  90. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  91. [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
  92. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  93. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  94. [    0.000000] ACPI: IRQ0 used by override.
  95. [    0.000000] ACPI: IRQ2 used by override.
  96. [    0.000000] ACPI: IRQ9 used by override.
  97. [    0.000000] Using ACPI (MADT) for SMP configuration information
  98. [    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
  99. [    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
  100. [    0.000000] nr_irqs_gsi: 24
  101. [    0.000000] early_res array is doubled to 64 at [7000 - 77ff]
  102. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  103. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  104. [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  105. [    0.000000] Allocating PCI resources starting at 7fe00000 (gap: 7fe00000:60200000)
  106. [    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
  107. [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001c00000 s78056 r8192 d24344 u524288
  108. [    0.000000] pcpu-alloc: s78056 r8192 d24344 u524288 alloc=1*2097152
  109. [    0.000000] pcpu-alloc: [0] 0 1 2 3
  110. [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516485
  111. [    0.000000] Policy zone: DMA32
  112. [    0.000000] Kernel command line: root=/dev/sda2 resume=/dev/sda6 BOOT_IMAGE=/vmlinuz-2.6.34-v-fox-desktop root=/dev/sda3 ro radeon.modeset=0 modeset=0
  113. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  114. [    0.000000] Checking aperture...
  115. [    0.000000] No AGP bridge found
  116. [    0.000000] Node 0: aperture @ e8b6000000 size 32 MB
  117. [    0.000000] Aperture beyond 4GB. Ignoring.
  118. [    0.000000] Subtract (47 early reservations)
  119. [    0.000000]   #1 [0001000000 - 0001b4fac8]   TEXT DATA BSS
  120. [    0.000000]   #2 [0001b50000 - 0001b500fe]             BRK
  121. [    0.000000]   #3 [00000f5580 - 0000100000]   BIOS reserved
  122. [    0.000000]   #4 [00000f5570 - 00000f5580]    MP-table mpf
  123. [    0.000000]   #5 [000009f800 - 00000f0f00]   BIOS reserved
  124. [    0.000000]   #6 [00000f1074 - 00000f5570]   BIOS reserved
  125. [    0.000000]   #7 [00000f0f00 - 00000f1074]    MP-table mpc
  126. [    0.000000]   #8 [0000001000 - 0000003000]      TRAMPOLINE
  127. [    0.000000]   #9 [0000003000 - 0000007000]     ACPI WAKEUP
  128. [    0.000000]   #10 [0000008000 - 000000a000]         PGTABLE
  129. [    0.000000]   #11 [0001b50100 - 0001b53100]       NODE_DATA
  130. [    0.000000]   #12 [0001b53100 - 0001b54100]         BOOTMEM
  131. [    0.000000]   #13 [0001b4fb00 - 0001b4fc00]         BOOTMEM
  132. [    0.000000]   #14 [0002355000 - 0002356000]         BOOTMEM
  133. [    0.000000]   #15 [0002356000 - 0002357000]         BOOTMEM
  134. [    0.000000]   #16 [0002400000 - 0004000000]        MEMMAP 0
  135. [    0.000000]   #17 [0001b4fc00 - 0001b4fd80]         BOOTMEM
  136. [    0.000000]   #18 [0001b54100 - 0001b60100]         BOOTMEM
  137. [    0.000000]   #19 [0001b61000 - 0001b62000]         BOOTMEM
  138. [    0.000000]   #20 [0001b4fd80 - 0001b4fdc1]         BOOTMEM
  139. [    0.000000]   #21 [0001b4fe00 - 0001b4fe43]         BOOTMEM
  140. [    0.000000]   #22 [0001b60100 - 0001b60330]         BOOTMEM
  141. [    0.000000]   #23 [0001b4fe80 - 0001b4fee8]         BOOTMEM
  142. [    0.000000]   #24 [0001b4ff00 - 0001b4ff68]         BOOTMEM
  143. [    0.000000]   #25 [0001b4ff80 - 0001b4ffe8]         BOOTMEM
  144. [    0.000000]   #26 [0001b60340 - 0001b603a8]         BOOTMEM
  145. [    0.000000]   #27 [0001b603c0 - 0001b60428]         BOOTMEM
  146. [    0.000000]   #28 [0001b60440 - 0001b604a8]         BOOTMEM
  147. [    0.000000]   #29 [0001b604c0 - 0001b60528]         BOOTMEM
  148. [    0.000000]   #30 [0001b60540 - 0001b605a8]         BOOTMEM
  149. [    0.000000]   #31 [0001b605c0 - 0001b60628]         BOOTMEM
  150. [    0.000000]   #32 [0001b60640 - 0001b60660]         BOOTMEM
  151. [    0.000000]   #33 [0001b60680 - 0001b606f6]         BOOTMEM
  152. [    0.000000]   #34 [0001b60700 - 0001b60776]         BOOTMEM
  153. [    0.000000]   #35 [0001c00000 - 0001c1b000]         BOOTMEM
  154. [    0.000000]   #36 [0001c80000 - 0001c9b000]         BOOTMEM
  155. [    0.000000]   #37 [0001d00000 - 0001d1b000]         BOOTMEM
  156. [    0.000000]   #38 [0001d80000 - 0001d9b000]         BOOTMEM
  157. [    0.000000]   #39 [0001b60780 - 0001b60788]         BOOTMEM
  158. [    0.000000]   #40 [0001b607c0 - 0001b607c8]         BOOTMEM
  159. [    0.000000]   #41 [0001b60800 - 0001b60810]         BOOTMEM
  160. [    0.000000]   #42 [0001b60840 - 0001b60860]         BOOTMEM
  161. [    0.000000]   #43 [0001b60880 - 0001b609b0]         BOOTMEM
  162. [    0.000000]   #44 [0001b609c0 - 0001b60a10]         BOOTMEM
  163. [    0.000000]   #45 [0001b60a40 - 0001b60a90]         BOOTMEM
  164. [    0.000000]   #46 [0001b62000 - 0001b6a000]         BOOTMEM
  165. [    0.000000] Memory: 2053752k/2094976k available (7137k kernel code, 392k absent, 40832k reserved, 3133k data, 620k init)
  166. [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  167. [    0.000000] Experimental preemptable hierarchical RCU implementation.
  168. [    0.000000] NR_IRQS:4352 nr_irqs:440
  169. [    0.000000] spurious 8259A interrupt: IRQ7.
  170. [    0.000000] Console: colour VGA+ 80x25
  171. [    0.000000] console [tty0] enabled
  172. [    0.000000] hpet clockevent registered
  173. [    0.000000] Fast TSC calibration using PIT
  174. [    0.000000] Detected 2618.258 MHz processor.
  175. [    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5236.51 BogoMIPS (lpj=2618258)
  176. [    0.001070] Security Framework initialized
  177. [    0.001211] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  178. [    0.003015] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  179. [    0.003605] Mount-cache hash table entries: 256
  180. [    0.003768] tseg: 007fe00000
  181. [    0.003770] CPU: Physical Processor ID: 0
  182. [    0.003792] CPU: Processor Core ID: 0
  183. [    0.003814] mce: CPU supports 5 MCE banks
  184. [    0.003843] using C1E aware idle routine
  185. [    0.003865] Performance Events: AMD PMU driver.
  186. [    0.003905] ... version:                0
  187. [    0.003926] ... bit width:              48
  188. [    0.003947] ... generic registers:      4
  189. [    0.003968] ... value mask:             0000ffffffffffff
  190. [    0.003990] ... max period:             00007fffffffffff
  191. [    0.004004] ... fixed-purpose events:   0
  192. [    0.004025] ... event mask:             000000000000000f
  193. [    0.004084] ACPI: Core revision 20100121
  194. [    0.012074] Setting APIC routing to flat
  195. [    0.013164] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  196. [    0.023225] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 02
  197. [    0.027015] Booting Node   0, Processors  #1
  198. [    0.098061] Brought up 2 CPUs
  199. [    0.098167] Total of 2 processors activated (10473.22 BogoMIPS).
  200. [    0.098833] regulator: core version 0.5
  201. [    0.098944] NET: Registered protocol family 16
  202. [    0.099377] node 0 link 0: io port [c000, ffff]
  203. [    0.099380] TOM: 0000000080000000 aka 2048M
  204. [    0.099437] node 0 link 0: mmio [a0000, bffff]
  205. [    0.099439] node 0 link 0: mmio [80000000, dfffffff]
  206. [    0.099441] node 0 link 0: mmio [f0000000, fe02ffff]
  207. [    0.099443] node 0 link 0: mmio [e0000000, e03fffff]
  208. [    0.099445] bus: [00, 03] on node 0 link 0
  209. [    0.099448] bus: 00 index 0 [io  0x0000-0xffff]
  210. [    0.099450] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
  211. [    0.099451] bus: 00 index 2 [mem 0x80000000-0xefffffff]
  212. [    0.099453] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
  213. [    0.099457] ACPI: bus type pci registered
  214. [    0.099612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  215. [    0.099675] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  216. [    0.116353] PCI: Using configuration type 1 for base access
  217. [    0.124491] bio: create slab <bio-0> at 0
  218. [    0.125407] ACPI: EC: Look up EC in DSDT
  219. [    0.130796] ACPI: Interpreter enabled
  220. [    0.130862] ACPI: (supports S0 S3 S4 S5)
  221. [    0.131134] ACPI: Using IOAPIC for interrupt routing
  222. [    0.137872] ACPI: No dock devices found.
  223. [    0.137935] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  224. [    0.138108] ACPI: PCI Root Bridge [PCI0] (0000:00)
  225. [    0.138389] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
  226. [    0.138446] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
  227. [    0.138501] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
  228. [    0.138560] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
  229. [    0.138619] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
  230. [    0.138678] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff]
  231. [    0.138760] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
  232. [    0.138822] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
  233. [    0.138825] pci 0000:00:02.0: PME# disabled
  234. [    0.138871] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
  235. [    0.138873] pci 0000:00:0a.0: PME# disabled
  236. [    0.138917] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
  237. [    0.138923] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
  238. [    0.138930] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
  239. [    0.138937] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
  240. [    0.138943] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
  241. [    0.138950] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
  242. [    0.139022] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
  243. [    0.139076] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
  244. [    0.139142] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
  245. [    0.139195] pci 0000:00:12.2: supports D1 D2
  246. [    0.139196] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
  247. [    0.139200] pci 0000:00:12.2: PME# disabled
  248. [    0.139232] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
  249. [    0.139288] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
  250. [    0.139353] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
  251. [    0.139405] pci 0000:00:13.2: supports D1 D2
  252. [    0.139407] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
  253. [    0.139411] pci 0000:00:13.2: PME# disabled
  254. [    0.139520] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
  255. [    0.139526] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
  256. [    0.139533] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
  257. [    0.139539] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
  258. [    0.139545] pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
  259. [    0.139607] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
  260. [    0.139650] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
  261. [    0.139654] pci 0000:00:14.2: PME# disabled
  262. [    0.139758] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
  263. [    0.139902] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
  264. [    0.139911] pci 0000:01:00.0: reg 18: [mem 0xfdfe0000-0xfdfeffff 64bit]
  265. [    0.139915] pci 0000:01:00.0: reg 20: [io  0xee00-0xeeff]
  266. [    0.139924] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
  267. [    0.139941] pci 0000:01:00.0: supports D1 D2
  268. [    0.139969] pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
  269. [    0.140013] pci 0000:01:00.1: supports D1 D2
  270. [    0.142010] pci 0000:00:02.0: PCI bridge to [bus 01-01]
  271. [    0.142069] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
  272. [    0.142072] pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
  273. [    0.142076] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  274. [    0.142122] pci 0000:02:00.0: reg 10: [io  0xde00-0xdeff]
  275. [    0.142137] pci 0000:02:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
  276. [    0.142148] pci 0000:02:00.0: reg 20: [mem 0xfdbe0000-0xfdbeffff 64bit pref]
  277. [    0.142154] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
  278. [    0.142184] pci 0000:02:00.0: supports D1 D2
  279. [    0.142186] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  280. [    0.142189] pci 0000:02:00.0: PME# disabled
  281. [    0.144013] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
  282. [    0.144071] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
  283. [    0.144073] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
  284. [    0.144077] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
  285. [    0.144134] pci 0000:03:06.0: reg 10: [mem 0xfdcff000-0xfdcfffff pref]
  286. [    0.144245] pci 0000:03:06.1: reg 10: [mem 0xfdcfe000-0xfdcfefff pref]
  287. [    0.144348] pci 0000:03:07.0: reg 10: [mem 0xfdde0000-0xfddeffff]
  288. [    0.144356] pci 0000:03:07.0: reg 14: [io  0xcf00-0xcf1f]
  289. [    0.144437] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
  290. [    0.144497] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
  291. [    0.144501] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
  292. [    0.144505] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
  293. [    0.144507] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
  294. [    0.144509] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
  295. [    0.144511] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  296. [    0.144513] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
  297. [    0.144516] pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
  298. [    0.144518] pci 0000:00:14.4:   bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
  299. [    0.144533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  300. [    0.144769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
  301. [    0.144839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
  302. [    0.144898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
  303. [    0.164714] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  304. [    0.165385] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  305. [    0.167042] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  306. [    0.167710] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  307. [    0.168374] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  308. [    0.169072] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  309. [    0.169739] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  310. [    0.170377] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  311. [    0.171213] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  312. [    0.171277] vgaarb: loaded
  313. [    0.171483] SCSI subsystem initialized
  314. [    0.171607] libata version 3.00 loaded.
  315. [    0.171685] usbcore: registered new interface driver usbfs
  316. [    0.171779] usbcore: registered new interface driver hub
  317. [    0.171883] usbcore: registered new device driver usb
  318. [    0.172348] ACPI: WMI: Mapper loaded
  319. [    0.172445] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
  320. [    0.172502] PCI: Using ACPI for IRQ routing
  321. [    0.172558] PCI: pci_cache_line_size set to 64 bytes
  322. [    0.172569] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
  323. [    0.172723] reserve RAM buffer: 000000000009f800 - 000000000009ffff
  324. [    0.172725] reserve RAM buffer: 000000007fde0000 - 000000007fffffff
  325. [    0.172857] NetLabel: Initializing
  326. [    0.172912] NetLabel:  domain hash size = 128
  327. [    0.172967] NetLabel:  protocols = UNLABELED CIPSOv4
  328. [    0.173021] NetLabel:  unlabeled traffic allowed by default
  329. [    0.173086] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  330. [    0.173386] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
  331. [    0.175029] Switching to clocksource hpet
  332. [    0.175175] Slow work thread pool: Starting up
  333. [    0.175263] Slow work thread pool: Ready
  334. [    0.175327] FS-Cache: Loaded
  335. [    0.175429] CacheFiles: Loaded
  336. [    0.175429] pnp: PnP ACPI init
  337. [    0.175429] ACPI: bus type pnp registered
  338. [    0.176194] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
  339. [    0.176283] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
  340. [    0.176348] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
  341. [    0.178351] pnp 00:0b: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
  342. [    0.178415] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
  343. [    0.178476] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
  344. [    0.178538] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
  345. [    0.178599] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
  346. [    0.178661] pnp 00:0b: disabling [mem 0x00100000-0x7fddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
  347. [    0.178835] pnp: PnP ACPI: found 12 devices
  348. [    0.178890] ACPI: ACPI bus type pnp unregistered
  349. [    0.178953] system 00:01: [io  0x04d0-0x04d1] has been reserved
  350. [    0.179034] system 00:01: [io  0x0220-0x0225] has been reserved
  351. [    0.179089] system 00:01: [io  0x0290-0x0294] has been reserved
  352. [    0.179148] system 00:02: [io  0x4100-0x411f] has been reserved
  353. [    0.179204] system 00:02: [io  0x0228-0x022f] has been reserved
  354. [    0.179259] system 00:02: [io  0x0238-0x023f] has been reserved
  355. [    0.179314] system 00:02: [io  0x040b] has been reserved
  356. [    0.179370] system 00:02: [io  0x04d6] has been reserved
  357. [    0.179425] system 00:02: [io  0x0c00-0x0c01] has been reserved
  358. [    0.179480] system 00:02: [io  0x0c14] has been reserved
  359. [    0.179535] system 00:02: [io  0x0c50-0x0c52] has been reserved
  360. [    0.179590] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
  361. [    0.179645] system 00:02: [io  0x0c6f] has been reserved
  362. [    0.179701] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
  363. [    0.179756] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
  364. [    0.179811] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
  365. [    0.179867] system 00:02: [io  0x4000-0x40fe] has been reserved
  366. [    0.179923] system 00:02: [io  0x4210-0x4217] has been reserved
  367. [    0.179978] system 00:02: [io  0x0b00-0x0b0f] has been reserved
  368. [    0.180048] system 00:02: [io  0x0b10-0x0b1f] has been reserved
  369. [    0.180103] system 00:02: [io  0x0b20-0x0b3f] has been reserved
  370. [    0.180160] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
  371. [    0.180222] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
  372. [    0.180281] system 00:0b: [mem 0x7fde0000-0x7fdfffff] could not be reserved
  373. [    0.180337] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
  374. [    0.180393] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
  375. [    0.180449] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
  376. [    0.180505] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
  377. [    0.185621] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
  378. [    0.185684] pci 0000:00:02.0: PCI bridge to [bus 01-01]
  379. [    0.185741] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
  380. [    0.185798] pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
  381. [    0.185856] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  382. [    0.185919] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref]
  383. [    0.185979] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
  384. [    0.186042] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
  385. [    0.186100] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
  386. [    0.186158] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
  387. [    0.186221] pci 0000:00:14.4: PCI bridge to [bus 03-03]
  388. [    0.186278] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
  389. [    0.186338] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
  390. [    0.186397] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
  391. [    0.186468]   alloc irq_desc for 18 on node 0
  392. [    0.186470]   alloc kstat_irqs on node 0
  393. [    0.186479] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  394. [    0.186539] pci 0000:00:02.0: setting latency timer to 64
  395. [    0.186546] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  396. [    0.186603] pci 0000:00:0a.0: setting latency timer to 64
  397. [    0.186611] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  398. [    0.186613] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  399. [    0.186615] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  400. [    0.186617] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
  401. [    0.186618] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
  402. [    0.186620] pci_bus 0000:00: resource 9 [mem 0x7ff00000-0xfebfffff]
  403. [    0.186622] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
  404. [    0.186624] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
  405. [    0.186626] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  406. [    0.186628] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
  407. [    0.186630] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
  408. [    0.186632] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
  409. [    0.186634] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
  410. [    0.186636] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
  411. [    0.186638] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
  412. [    0.186640] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
  413. [    0.186641] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
  414. [    0.186643] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
  415. [    0.186645] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
  416. [    0.186647] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
  417. [    0.186648] pci_bus 0000:03: resource 9 [mem 0x7ff00000-0xfebfffff]
  418. [    0.186671] NET: Registered protocol family 2
  419. [    0.186800] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  420. [    0.187537] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  421. [    0.189558] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  422. [    0.190143] TCP: Hash tables configured (established 262144 bind 65536)
  423. [    0.190202] TCP reno registered
  424. [    0.190267] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  425. [    0.190347] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  426. [    0.190503] NET: Registered protocol family 1
  427. [    0.190661] RPC: Registered udp transport module.
  428. [    0.190717] RPC: Registered tcp transport module.
  429. [    0.190772] RPC: Registered tcp NFSv4.1 backchannel transport module.
  430. [    0.306043] pci 0000:01:00.0: Boot video device
  431. [    0.306060] PCI: CLS 4 bytes, default 64
  432. [    0.307419] microcode: microcode: CPU0: AMD CPU family 0xf not supported
  433. [    0.307487] microcode: microcode: CPU1: AMD CPU family 0xf not supported
  434. [    0.307589] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
  435. [    0.310834] VFS: Disk quotas dquot_6.5.2
  436. [    0.310956] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  437. [    0.311845] Installing knfsd (copyright (C) 1996 [email protected]).
  438. [    0.312339] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  439. [    0.313094] SGI XFS Quota Management subsystem
  440. [    0.313159] msgmni has been set to 4011
  441. [    0.314366] alg: No test for stdrng (krng)
  442. [    0.314558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  443. [    0.314622] io scheduler noop registered
  444. [    0.314676] io scheduler deadline registered
  445. [    0.314845] io scheduler cfq registered (default)
  446. [    0.315090] pcieport 0000:00:02.0: setting latency timer to 64
  447. [    0.315114]   alloc irq_desc for 24 on node 0
  448. [    0.315115]   alloc kstat_irqs on node 0
  449. [    0.315124] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
  450. [    0.315271] pcieport 0000:00:0a.0: setting latency timer to 64
  451. [    0.315290]   alloc irq_desc for 25 on node 0
  452. [    0.315291]   alloc kstat_irqs on node 0
  453. [    0.315296] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
  454. [    0.315475] pcieport 0000:00:02.0: Requesting control of PCIe PME from ACPI BIOS
  455. [    0.315545] pcieport 0000:00:02.0: Failed to receive control of PCIe PME service: no _OSC support
  456. [    0.315609] pcie_pme: probe of 0000:00:02.0:pcie01 failed with error -13
  457. [    0.315667] pcieport 0000:00:0a.0: Requesting control of PCIe PME from ACPI BIOS
  458. [    0.315728] pcieport 0000:00:0a.0: Failed to receive control of PCIe PME service: no _OSC support
  459. [    0.315789] pcie_pme: probe of 0000:00:0a.0:pcie01 failed with error -13
  460. [    0.315917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  461. [    0.316097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  462. [    0.316157] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  463. [    0.316815] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  464. [    0.316877] ACPI: Power Button [PWRB]
  465. [    0.317040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  466. [    0.317101] ACPI: Power Button [PWRF]
  467. [    0.322689] Non-volatile memory driver v1.3
  468. [    0.322802] Linux agpgart interface v0.103
  469. [    0.322897] [drm] Initialized drm 1.1.0 20060810
  470. [    0.323524] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  471. [    0.323584] pci 0000:01:00.0: setting latency timer to 64
  472. [    0.323697] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
  473. [    0.324017] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  474. [    0.568143] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  475. [    0.568614] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  476. [    0.568863] IT8718 SuperIO detected.
  477. [    0.571056] brd: module loaded
  478. [    0.571812] loop: module loaded
  479. [    0.574309] Loading iSCSI transport class v2.0-870.
  480. [    0.574532] st: Version 20081215, fixed bufsize 32768, s/g segs 256
  481. [    0.574793] SCSI Media Changer driver v0.25
  482. [    0.575013] ahci 0000:00:11.0: version 3.0
  483. [    0.575034]   alloc irq_desc for 22 on node 0
  484. [    0.575035]   alloc kstat_irqs on node 0
  485. [    0.575046] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  486. [    0.575262] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
  487. [    0.575325] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
  488. [    0.575932] scsi0 : ahci
  489. [    0.576197] scsi1 : ahci
  490. [    0.576348] scsi2 : ahci
  491. [    0.576498] scsi3 : ahci
  492. [    0.577600] scsi4 : ahci
  493. [    0.577746] scsi5 : ahci
  494. [    0.577974] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
  495. [    0.578046] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
  496. [    0.578107] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
  497. [    0.578169] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
  498. [    0.578230] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
  499. [    0.578291] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
  500. [    0.579028]   alloc irq_desc for 16 on node 0
  501. [    0.579030]   alloc kstat_irqs on node 0
  502. [    0.579039] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  503. [    0.579204] scsi6 : pata_atiixp
  504. [    0.579350] scsi7 : pata_atiixp
  505. [    0.580373] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
  506. [    0.580430] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
  507. [    0.580805] console [netcon0] enabled
  508. [    0.580860] netconsole: network logging started
  509. [    0.580952] usbmon: debugfs is not available
  510. [    0.581054] usbcore: registered new interface driver libusual
  511. [    0.581206] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  512. [    0.581263] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  513. [    0.581489] serio: i8042 KBD port at 0x60,0x64 irq 1
  514. [    0.581646] mice: PS/2 mouse device common for all mice
  515. [    0.581922] rtc_cmos 00:05: RTC can wake from S4
  516. [    0.582059] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  517. [    0.582152] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
  518. [    0.582350] device-mapper: uevent: version 1.0.3
  519. [    0.582487] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
  520. [    0.586027] device-mapper: multipath: version 1.1.1 loaded
  521. [    0.586084] device-mapper: multipath round-robin: version 1.0.0 loaded
  522. [    0.586240] EDAC MC: Ver: 2.1.0 May 18 2010
  523. [    0.586453] EDAC amd64_edac:  Ver: 3.3.0 May 18 2010
  524. [    0.587022] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
  525. [    0.587089] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  526. [    0.587090]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  527. [    0.587091]  (Note that use of the override may cause unknown side effects.)
  528. [    0.587273] amd64_edac: probe of 0000:00:18.2 failed with error -22
  529. [    0.589020] cpuidle: using governor ladder
  530. [    0.590201] usbcore: registered new interface driver hiddev
  531. [    0.590298] usbcore: registered new interface driver usbhid
  532. [    0.590354] usbhid: USB HID core driver
  533. [    0.591032] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  534. [    0.600232] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  535. [    0.601641] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input3
  536. [    0.606036]   alloc irq_desc for 19 on node 0
  537. [    0.606038]   alloc kstat_irqs on node 0
  538. [    0.606050] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  539. [    0.606156]   alloc irq_desc for 26 on node 0
  540. [    0.606157]   alloc kstat_irqs on node 0
  541. [    0.606166] HDA Intel 0000:01:00.1: irq 26 for MSI/MSI-X
  542. [    0.606192] HDA Intel 0000:01:00.1: setting latency timer to 64
  543. [    0.610667] ALSA device list:
  544. [    0.610724]   #0: HDA ATI SB at 0xfe024000 irq 16
  545. [    0.610779]   #1: HDA ATI HDMI at 0xfdffc000 irq 26
  546. [    0.610886] pktgen 2.72: Packet Generator for packet performance testing.
  547. [    0.612020] Netfilter messages via NETLINK v0.30.
  548. [    0.612092] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  549. [    0.612341] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  550. [    0.612402] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  551. [    0.612462] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  552. [    0.612537] ctnetlink v0.93: registering with nfnetlink.
  553. [    0.612603] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  554. [    0.612660] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  555. [    0.612742] xt_time: kernel timezone is -0000
  556. [    0.612912] ip_tables: (C) 2000-2006 Netfilter Core Team
  557. [    0.612993] ClusterIP Version 0.8 loaded successfully
  558. [    0.613108] arp_tables: (C) 2002 David S. Miller
  559. [    0.613179] TCP cubic registered
  560. [    0.613233] TCP highspeed registered
  561. [    0.613288] TCP scalable registered
  562. [    0.613342] TCP lp registered
  563. [    0.613396] Initializing XFRM netlink socket
  564. [    0.613715] NET: Registered protocol family 10
  565. [    0.613955] lo: Disabled Privacy Extensions
  566. [    0.614077] Mobile IPv6
  567. [    0.614139] ip6_tables: (C) 2000-2006 Netfilter Core Team
  568. [    0.614228] IPv6 over IPv4 tunneling driver
  569. [    0.614415] sit0: Disabled Privacy Extensions
  570. [    0.614587] ip6tnl0: Disabled Privacy Extensions
  571. [    0.614655] NET: Registered protocol family 17
  572. [    0.614730] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
  573. [    0.614800] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
  574. [    0.614801] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
  575. [    0.734522] ata7.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33
  576. [    0.740464] ata7.00: configured for UDMA/33
  577. [    0.883154] ata6: SATA link down (SStatus 0 SControl 300)
  578. [    1.036016] ata2: softreset failed (device not ready)
  579. [    1.036075] ata2: applying SB600 PMP SRST workaround and retrying
  580. [    1.036140] ata4: softreset failed (device not ready)
  581. [    1.036149] ata1: softreset failed (device not ready)
  582. [    1.036151] ata1: applying SB600 PMP SRST workaround and retrying
  583. [    1.036172] ata5: softreset failed (device not ready)
  584. [    1.036175] ata5: applying SB600 PMP SRST workaround and retrying
  585. [    1.036426] ata4: applying SB600 PMP SRST workaround and retrying
  586. [    1.189013] ata3: softreset failed (device not ready)
  587. [    1.189071] ata3: applying SB600 PMP SRST workaround and retrying
  588. [    1.189161] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  589. [    1.189163] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  590. [    1.189185] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  591. [    1.189210] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  592. [    1.190105] ata5.00: HPA detected: current 488395055, native 488397168
  593. [    1.190242] ata5.00: ATA-8: WDC WD2500AAJS-00VTA0, 01.01B01, max UDMA/133
  594. [    1.190299] ata5.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  595. [    1.191488] ata5.00: configured for UDMA/133
  596. [    1.191578] ata2.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133
  597. [    1.191637] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  598. [    1.192802] ata1.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
  599. [    1.192860] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  600. [    1.192962] ata2.00: configured for UDMA/133
  601. [    1.196806] ata1.00: configured for UDMA/133
  602. [    1.207120] scsi 0:0:0:0: Direct-Access     ATA      WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5
  603. [    1.207444] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
  604. [    1.207455] sd 0:0:0:0: Attached scsi generic sg0 type 0
  605. [    1.207630] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5
  606. [    1.207791] sd 0:0:0:0: [sda] Write Protect is off
  607. [    1.207860] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  608. [    1.207941] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  609. [    1.208016] sd 1:0:0:0: Attached scsi generic sg1 type 0
  610. [    1.208038] sd 1:0:0:0: [sdb] Write Protect is off
  611. [    1.208040] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  612. [    1.208055] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  613. [    1.208179]  sdb:
  614. [    1.208219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  615. [    1.208300]  sda:
  616. [    1.215437] ata4.00: HPA detected: current 586070255, native 586072368
  617. [    1.215624] ata4.00: ATA-7: WDC WD3000JS-00PDB0, 21.00M21, max UDMA/133
  618. [    1.215681] ata4.00: 586070255 sectors, multi 0: LBA48 NCQ (depth 1), AA
  619. [    1.216526] ata4.00: configured for UDMA/133
  620. [    1.225563]  sda1 sda2 sda3 sda4
  621. [    1.226181] sd 0:0:0:0: [sda] Attached SCSI disk
  622. [    1.342024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  623. [    1.342754] ata3.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133
  624. [    1.342811] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  625. [    1.343601] ata3.00: configured for UDMA/133
  626. [    1.354068] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5
  627. [    1.354348] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  628. [    1.354463] sd 2:0:0:0: Attached scsi generic sg2 type 0
  629. [    1.354557] sd 2:0:0:0: [sdc] Write Protect is off
  630. [    1.354614] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  631. [    1.354681] scsi 3:0:0:0: Direct-Access     ATA      WDC WD3000JS-00P 21.0 PQ: 0 ANSI: 5
  632. [    1.354765] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  633. [    1.354997] sd 3:0:0:0: [sdd] 586070255 512-byte logical blocks: (300 GB/279 GiB)
  634. [    1.355053] sd 3:0:0:0: Attached scsi generic sg3 type 0
  635. [    1.355156] scsi 4:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-0 01.0 PQ: 0 ANSI: 5
  636. [    1.355166] sd 3:0:0:0: [sdd] Write Protect is off
  637. [    1.355168] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  638. [    1.355182] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  639. [    1.355263]  sdd:
  640. [    1.355311]  sdc:
  641. [    1.355618] sd 4:0:0:0: [sde] 488395055 512-byte logical blocks: (250 GB/232 GiB)
  642. [    1.355765] sd 4:0:0:0: [sde] Write Protect is off
  643. [    1.355821] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
  644. [    1.355837] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  645. [    1.355982]  sde:
  646. [    1.356070] sd 4:0:0:0: Attached scsi generic sg4 type 0
  647. [    1.356741]  sdd3 sdd4 <
  648. [    1.357374] scsi 6:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5
  649. [    1.361383] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
  650. [    1.361442] Uniform CD-ROM driver Revision: 3.20
  651. [    1.361611] sr 6:0:0:0: Attached scsi CD-ROM sr0
  652. [    1.361693] sr 6:0:0:0: Attached scsi generic sg5 type 5
  653. [    1.371738]  sdd5 sdc1
  654. [    1.374476] sd 2:0:0:0: [sdc] Attached SCSI disk
  655. [    1.375665]  sde1 sde2
  656. [    1.376063] sd 4:0:0:0: [sde] Attached SCSI disk
  657. [    1.382367]  sdd6 sdd7 >
  658. [    1.393251] sd 3:0:0:0: [sdd] Attached SCSI disk
  659. [    1.682389]  sdb1
  660. [    1.682695] sd 1:0:0:0: [sdb] Attached SCSI disk
  661. [    1.682790] registered taskstats version 1
  662. [    1.683161] rtc_cmos 00:05: setting system clock to 2010-05-28 16:41:34 UTC (1275064894)
  663. [    1.683223] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  664. [    1.683279] EDD information not available.
  665. [    1.743797] EXT4-fs (sda3): mounted filesystem with writeback data mode
  666. [    1.743966] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
  667. [    1.744064] Freeing unused kernel memory: 620k freed
  668. [    4.062737] udev: starting version 151
  669. [    4.190814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  670. [    4.192604] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  671. [    4.213710]   alloc irq_desc for 17 on node 0
  672. [    4.213714]   alloc kstat_irqs on node 0
  673. [    4.213728] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  674. [    4.213752] ehci_hcd 0000:00:12.2: EHCI Host Controller
  675. [    4.213790] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
  676. [    4.213825] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
  677. [    4.213840] ehci_hcd 0000:00:12.2: debug port 1
  678. [    4.213874] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
  679. [    4.220045] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
  680. [    4.220084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  681. [    4.220086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  682. [    4.220088] usb usb1: Product: EHCI Host Controller
  683. [    4.220090] usb usb1: Manufacturer: Linux 2.6.34-v-fox-desktop ehci_hcd
  684. [    4.220091] usb usb1: SerialNumber: 0000:00:12.2
  685. [    4.220203] hub 1-0:1.0: USB hub found
  686. [    4.220208] hub 1-0:1.0: 6 ports detected
  687. [    4.232278] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  688. [    4.232305] ohci_hcd 0000:00:12.0: OHCI Host Controller
  689. [    4.232480] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
  690. [    4.232510] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
  691. [    4.287052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  692. [    4.287056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  693. [    4.287058] usb usb2: Product: OHCI Host Controller
  694. [    4.287060] usb usb2: Manufacturer: Linux 2.6.34-v-fox-desktop ohci_hcd
  695. [    4.287062] usb usb2: SerialNumber: 0000:00:12.0
  696. [    4.287170] hub 2-0:1.0: USB hub found
  697. [    4.287177] hub 2-0:1.0: 3 ports detected
  698. [    4.287326] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  699. [    4.287353] ehci_hcd 0000:00:13.2: EHCI Host Controller
  700. [    4.287370] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
  701. [    4.287396] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
  702. [    4.287410] ehci_hcd 0000:00:13.2: debug port 1
  703. [    4.287442] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
  704. [    4.293013] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
  705. [    4.293030] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  706. [    4.293032] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  707. [    4.293034] usb usb3: Product: EHCI Host Controller
  708. [    4.293035] usb usb3: Manufacturer: Linux 2.6.34-v-fox-desktop ehci_hcd
  709. [    4.293037] usb usb3: SerialNumber: 0000:00:13.2
  710. [    4.293104] hub 3-0:1.0: USB hub found
  711. [    4.293108] hub 3-0:1.0: 6 ports detected
  712. [    4.294116] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [mem 0x00000b00-0x00000b0f 64bit pref disabled]
  713. [    4.294119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  714. [    4.295020] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
  715. [    4.296174] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  716. [    4.296199] ohci_hcd 0000:00:12.1: OHCI Host Controller
  717. [    4.296213] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
  718. [    4.296237] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
  719. [    4.351046] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  720. [    4.351048] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  721. [    4.351050] usb usb4: Product: OHCI Host Controller
  722. [    4.351051] usb usb4: Manufacturer: Linux 2.6.34-v-fox-desktop ohci_hcd
  723. [    4.351053] usb usb4: SerialNumber: 0000:00:12.1
  724. [    4.353694] hub 4-0:1.0: USB hub found
  725. [    4.353704] hub 4-0:1.0: 3 ports detected
  726. [    4.354043] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  727. [    4.354073] ohci_hcd 0000:00:13.0: OHCI Host Controller
  728. [    4.354084] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
  729. [    4.354125] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
  730. [    4.410756] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  731. [    4.410760] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  732. [    4.410762] usb usb5: Product: OHCI Host Controller
  733. [    4.410764] usb usb5: Manufacturer: Linux 2.6.34-v-fox-desktop ohci_hcd
  734. [    4.410766] usb usb5: SerialNumber: 0000:00:13.0
  735. [    4.411375] hub 5-0:1.0: USB hub found
  736. [    4.411384] hub 5-0:1.0: 3 ports detected
  737. [    4.414043] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  738. [    4.414075] ohci_hcd 0000:00:13.1: OHCI Host Controller
  739. [    4.414095] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
  740. [    4.414123] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
  741. [    4.424017] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  742. [    4.424044] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  743. [    4.424082] r8169 0000:02:00.0: setting latency timer to 64
  744. [    4.424116]   alloc irq_desc for 27 on node 0
  745. [    4.424118]   alloc kstat_irqs on node 0
  746. [    4.424132] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
  747. [    4.424303] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc9001098c000, 00:1f:d0:59:d8:3f, XID 1c4000c0 IRQ 27
  748. [    4.469050] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  749. [    4.469054] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  750. [    4.469056] usb usb6: Product: OHCI Host Controller
  751. [    4.469058] usb usb6: Manufacturer: Linux 2.6.34-v-fox-desktop ohci_hcd
  752. [    4.469059] usb usb6: SerialNumber: 0000:00:13.1
  753. [    4.469172] hub 6-0:1.0: USB hub found
  754. [    4.469179] hub 6-0:1.0: 3 ports detected
  755. [    4.470033] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  756. [    4.470062] ohci_hcd 0000:00:14.5: OHCI Host Controller
  757. [    4.470073] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
  758. [    4.470097] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
  759. [    4.525052] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  760. [    4.525057] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  761. [    4.525059] usb usb7: Product: OHCI Host Controller
  762. [    4.525060] usb usb7: Manufacturer: Linux 2.6.34-v-fox-desktop ohci_hcd
  763. [    4.525062] usb usb7: SerialNumber: 0000:00:14.5
  764. [    4.525169] hub 7-0:1.0: USB hub found
  765. [    4.525176] hub 7-0:1.0: 2 ports detected
  766. [    4.564908] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
  767. [    4.575144] flexcop-pci: will use the HW PID filter.
  768. [    4.575151] flexcop-pci: card revision 2
  769. [    4.575163]   alloc irq_desc for 21 on node 0
  770. [    4.575165]   alloc kstat_irqs on node 0
  771. [    4.575177] b2c2_flexcop_pci 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  772. [    4.575228] ------------[ cut here ]------------
  773. [    4.575234] WARNING: at fs/proc/generic.c:317 __xlate_proc_name+0xb5/0xd0()
  774. [    4.575236] Hardware name: GA-MA78G-DS3H
  775. [    4.575237] name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver'
  776. [    4.575238] Modules linked in: b2c2_flexcop_pci(+) b2c2_flexcop dvb_core btcx_risc cx24123 r8169 cx24113 tveeprom k8temp s5h1420 ir_core hwmon i2c_piix4 mii ohci_hcd ehci_hcd
  777. [    4.575251] Pid: 1417, comm: work_for_cpu Not tainted 2.6.34-v-fox-desktop #1
  778. [    4.575253] Call Trace:
  779. [    4.575260]  [<ffffffff81040783>] ? warn_slowpath_common+0x73/0xb0
  780. [    4.575263]  [<ffffffff81040820>] ? warn_slowpath_fmt+0x40/0x50
  781. [    4.575266]  [<ffffffff81122d35>] ? __xlate_proc_name+0xb5/0xd0
  782. [    4.575268]  [<ffffffff81122dde>] ? __proc_create+0x7e/0x150
  783. [    4.575271]  [<ffffffff81123db7>] ? proc_mkdir_mode+0x27/0x60
  784. [    4.575274]  [<ffffffff8107c18d>] ? register_handler_proc+0x13d/0x160
  785. [    4.575277]  [<ffffffff810797f1>] ? __setup_irq+0x1d1/0x330
  786. [    4.575282]  [<ffffffffa00a0160>] ? flexcop_pci_isr+0x0/0x190 [b2c2_flexcop_pci]
  787. [    4.575285]  [<ffffffff8107a1f3>] ? request_threaded_irq+0x123/0x1c0
  788. [    4.575289]  [<ffffffffa00a0495>] ? flexcop_pci_probe+0x1a5/0x330 [b2c2_flexcop_pci]
  789. [    4.575293]  [<ffffffff81053c10>] ? do_work_for_cpu+0x0/0x20
  790. [    4.575297]  [<ffffffff812ba642>] ? local_pci_probe+0x12/0x20
  791. [    4.575300]  [<ffffffff81053c1b>] ? do_work_for_cpu+0xb/0x20
  792. [    4.575303]  [<ffffffff81057afe>] ? kthread+0x8e/0xa0
  793. [    4.575306]  [<ffffffff81003314>] ? kernel_thread_helper+0x4/0x10
  794. [    4.575308]  [<ffffffff81057a70>] ? kthread+0x0/0xa0
  795. [    4.575311]  [<ffffffff81003310>] ? kernel_thread_helper+0x0/0x10
  796. [    4.575313] ---[ end trace 1637726d2ae1ae10 ]---
  797. [    4.579199] DVB: registering new adapter (FlexCop Digital TV device)
  798. [    4.580769] b2c2-flexcop: MAC address = 00:d0:d7:10:58:70
  799. [    4.581437] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
  800. [    4.581439] CX24123: wrong demod revision: 87
  801. [    4.774940] Linux video capture interface: v2.00
  802. [    4.798095] bttv: driver version 0.9.18 loaded
  803. [    4.798098] bttv: using 8 buffers with 2080k (520 pages) each for capture
  804. [    4.812325] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
  805. [    4.812330] Disabling lock debugging due to kernel taint
  806. [    4.867493] [fglrx] Maximum main memory to use for locked dma buffers: 1879 MBytes.
  807. [    4.867672] [fglrx]   vendor: 1002 device: 944e count: 1
  808. [    4.867970] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
  809. [    4.867977] pci 0000:01:00.0: setting latency timer to 64
  810. [    4.868154] [fglrx] Kernel PAT support is enabled
  811. [    4.868182] [fglrx] module loaded - fglrx 8.72.5 [Apr  6 2010] with 1 minors
  812. [    5.004025] usb 2-1: new low speed USB device using ohci_hcd and address 2
  813. [    5.161877] usb 2-1: New USB device found, idVendor=046d, idProduct=c218
  814. [    5.161882] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  815. [    5.161884] usb 2-1: Product: Logitech RumblePad 2 USB
  816. [    5.161886] usb 2-1: Manufacturer: Logitech
  817. [    5.179896] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.0/input/input4
  818. [    5.179959] logitech 0003:046D:C218.0001: input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:12.0-1/input0
  819. [    5.179972] logitech 0003:046D:C218.0001: Force feedback for Logitech Rumblepad 2 by Anssi Hannula <[email protected]>
  820. [    5.209804] b2c2-flexcop: found 'ST STV0299 DVB-S' .
  821. [    5.209809] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
  822. [    5.209875] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
  823. [    5.218758] bttv: Bt8xx card found (0).
  824. [    5.218785]   alloc irq_desc for 20 on node 0
  825. [    5.218788]   alloc kstat_irqs on node 0
  826. [    5.218801] bttv 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  827. [    5.218814] bttv0: Bt878 (rev 17) at 0000:03:06.0, irq: 20, latency: 32, mmio: 0xfdcff000
  828. [    5.218846] bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
  829. [    5.218848] bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
  830. [    5.218851] IRQ 20/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
  831. [    5.218903] bttv0: gpio: en=00000000, out=00000000 in=00ecfff3 [init]
  832. [    5.258792] bttv0: Avermedia eeprom[0x4821]: tuner=5 radio:yes remote control:yes
  833. [    5.258797] bttv0: tuner type=5
  834. [    5.362317] bttv0: audio absent, no audio device found!
  835. [    5.387045] tuner 3-0061: chip found @ 0xc2 (bt878 #0 [sw])
  836. [    5.397353] tuner-simple 3-0061: creating new instance
  837. [    5.397356] tuner-simple 3-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
  838. [    5.398196] bttv0: registered device video0
  839. [    5.398216] bttv0: registered device vbi0
  840. [    5.398234] bttv0: registered device radio0
  841. [    5.398265] bttv0: PLL: 28636363 => 35468950 .
  842. [    5.407018] usb 2-2: new low speed USB device using ohci_hcd and address 3
  843. [    5.409010] . ok
  844. [    5.433249] input: bttv IR (card=41) as /devices/pci0000:00/0000:00:14.4/0000:03:06.0/input/input5
  845. [    5.433286] Creating IR device irrcv0
  846. [    5.622749] usb 2-2: New USB device found, idVendor=051d, idProduct=0002
  847. [    5.622753] usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  848. [    5.622755] usb 2-2: Product: Back-UPS ES 525 FW:851.t3.I USB FW:t3
  849. [    5.622757] usb 2-2: Manufacturer: American Power Conversion
  850. [    5.622759] usb 2-2: SerialNumber: 8B0803R23819 
  851. [    6.106678] generic-usb 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS ES 525 FW:851.t3.I USB FW:t3] on usb-0000:00:12.0-2/input0
  852. [    6.151126] kvm: Nested Virtualization enabled
  853. [    6.244501] vboxdrv: Trying to deactivate the NMI watchdog permanently...
  854. [    6.244505] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
  855. [    6.244506] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
  856. [    6.244507] vboxdrv: the usage of hardware performance counters by
  857. [    6.244508] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
  858. [    6.244510] vboxdrv: Found 2 processor cores.
  859. [    6.244682] VBoxDrv: dbg - g_abExecMemory=ffffffffa044aee0
  860. [    6.244697] vboxdrv: fAsync=1 offMin=0xa750 offMax=0xa750
  861. [    6.245080] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
  862. [    6.245083] vboxdrv: Successfully loaded version 3.1.8 (interface 0x00100001).
  863. [    6.333151] usb 2-3: new full speed USB device using ohci_hcd and address 4
  864. [    6.358810] uvesafb: (C) 1988-2005, ATI Technologies Inc. , RV770, 01.00, OEM: ATI ATOMBIOS, VBE v3.0
  865. [    6.381860] uvesafb: VBIOS/hardware supports DDC2 transfers
  866. [    6.435879] uvesafb: monitor limits: vf = 76 Hz, hf = 83 kHz, clk = 210 MHz
  867. [    6.435949] uvesafb: scrolling: redraw
  868. [    6.440528] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
  869. [    6.480633] usb 2-3: New USB device found, idVendor=044f, idProduct=b323
  870. [    6.480635] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  871. [    6.480637] usb 2-3: Product: Dual Trigger 3-in-1
  872. [    6.480638] usb 2-3: Manufacturer: Thrustmaster
  873. [    6.489666] input: Thrustmaster Dual Trigger 3-in-1 as /devices/pci0000:00/0000:00:12.0/usb2/2-3/2-3:1.0/input/input6
  874. [    6.489750] thrustmaster 0003:044F:B323.0003: input,hidraw2: USB HID v1.00 Gamepad [Thrustmaster Dual Trigger 3-in-1] on usb-0000:00:12.0-3/input0
  875. [    6.489755] thrustmaster 0003:044F:B323.0003: force feedback for ThrustMaster devices by Zinx Verituse <[email protected]>
  876. [    6.716138] usb 4-1: new full speed USB device using ohci_hcd and address 2
  877. [    6.724744] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
  878. [    6.863846] usb 4-1: New USB device found, idVendor=0ac8, idProduct=301b
  879. [    6.863848] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  880. [    6.863850] usb 4-1: Product: PC Camera
  881. [    6.863851] usb 4-1: Manufacturer: Vimicro Corp.
  882. [    6.883033] gspca: main v2.9.0 registered
  883. [    6.892638] gspca: probing 0ac8:301b
  884. [    6.996280] Console: switching to colour frame buffer device 175x65
  885. [    6.996333] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
  886. [    7.092137] usb 4-3: new low speed USB device using ohci_hcd and address 3
  887. [    7.150149] zc3xx: probe sensor -> 000a
  888. [    7.150151] zc3xx: Find Sensor PB0330. Chip revision 0
  889. [    7.154199] input: zc3xx as /devices/pci0000:00/0000:00:12.1/usb4/4-1/input/input7
  890. [    7.154262] gspca: video1 created
  891. [    7.154264] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
  892. [    7.154288] usbcore: registered new interface driver zc3xx
  893. [    7.154289] zc3xx: registered
  894. [    7.242916] usb 4-3: New USB device found, idVendor=046d, idProduct=c01b
  895. [    7.242918] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  896. [    7.242920] usb 4-3: Product: USB-PS/2 Optical Mouse
  897. [    7.242922] usb 4-3: Manufacturer: Logitech
  898. [    7.251178] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input8
  899. [    7.251249] generic-usb 0003:046D:C01B.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-3/input0
  900. [    7.261702] uvesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011000000, using 11550k, total 16384k
  901. [    7.261705] fb0: VESA VGA frame buffer device
  902. [    7.995262] EXT4-fs (sda4): barriers disabled
  903. [    8.001298] EXT4-fs (sda4): mounted filesystem with ordered data mode
  904. [    8.021868] XFS mounting filesystem sde2
  905. [    8.145640] Ending clean XFS mount for filesystem: sde2
  906. [    8.201976] XFS mounting filesystem sda1
  907. [    8.417572] Ending clean XFS mount for filesystem: sda1
  908. [    8.432908] XFS mounting filesystem sdb1
  909. [    8.565409] Starting XFS recovery on filesystem: sdb1 (logdev: internal)
  910. [    9.286424] Ending XFS recovery on filesystem: sdb1 (logdev: internal)
  911. [    9.373931] XFS mounting filesystem sdc1
  912. [    9.493379] Ending clean XFS mount for filesystem: sdc1
  913. [    9.643711] fuse init (API version 7.13)
  914. [   10.167415] EXT4-fs (sdd7): barriers disabled
  915. [   10.178247] EXT4-fs (sdd7): mounted filesystem with writeback data mode
  916. [   11.956773] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
  917. [   13.118215] init ip6-ip6: add_linklocal failed
  918. [   13.118501] r8169 0000:02:00.0: eth0: link up
  919. [   13.118508] r8169 0000:02:00.0: eth0: link up
  920. [   13.119235] vboxNetAdpOpen returns 0
  921. [   22.681629] [drm] Setting GART location based on new memory map
  922. [   22.681836] [drm] Loading RV770 CP Microcode
  923. [   22.681840] platform r600_cp.0: firmware: using built-in firmware radeon/RV770_pfp.bin
  924. [   22.681843] platform r600_cp.0: firmware: using built-in firmware radeon/RV770_me.bin
  925. [   22.711922] [drm] Resetting GPU
  926. [   22.711980] [drm] writeback test succeeded in 1 usecs
  927. [   23.587011] eth0: no IPv6 routers present
  928. [   23.762012] vboxnet0: no IPv6 routers present
  929. [   31.664660] it87: Found IT8718F chip at 0x228, revision 5
  930. [   31.664680] it87: in3 is VCC (+5V)
  931. [   31.664685] it87: Beeping is supported
  932. [   35.740812] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  933. [   35.740970] NFSD: starting 90-second grace period
  934. [   39.975634] Adding 4200960k swap on /dev/sdd6.  Priority:-1 extents:1 across:4200960k
  935. [   76.727567] FS-Cache: Netfs 'nfs' registered for caching
  936. [   95.435936] possible SYN flooding on port 7881. Sending cookies.
  937. [ 1092.666101] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
  938. [ 1092.666109] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
  939. [ 1092.666112] ata3: irq_stat 0x00400000, PHY RDY changed
  940. [ 1092.666116] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B }
  941. [ 1092.666117] ata2: irq_stat 0x00400000, PHY RDY changed
  942. [ 1092.666121] ata2: SError: { RecovComm Persist PHYRdyChg 10B8B }
  943. [ 1092.666128] ata3: hard resetting link
  944. [ 1092.666138] ata2: hard resetting link
  945. [ 1100.564149] ata2: softreset failed (device not ready)
  946. [ 1100.564154] ata2: applying SB600 PMP SRST workaround and retrying
  947. [ 1100.717157] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  948. [ 1100.717177] ata3: softreset failed (device not ready)
  949. [ 1100.717181] ata3: applying SB600 PMP SRST workaround and retrying
  950. [ 1100.752061] ata2.00: configured for UDMA/133
  951. [ 1100.752067] ata2: EH complete
  952. [ 1100.870157] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  953. [ 1100.871518] ata3.00: configured for UDMA/133
  954. [ 1100.871523] ata3: EH complete
  955. [ 1138.561688] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
  956. [ 1138.561691] ata2: irq_stat 0x00400000, PHY RDY changed
  957. [ 1138.561694] ata2: SError: { RecovComm Persist PHYRdyChg 10B8B }
  958. [ 1138.561699] ata2: hard resetting link
  959. [ 1138.561714] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
  960. [ 1138.561716] ata3: irq_stat 0x00400000, PHY RDY changed
  961. [ 1138.561718] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B }
  962. [ 1138.561720] ata3: hard resetting link
  963. [ 1141.671165] ata2: SATA link down (SStatus 0 SControl 300)
  964. [ 1141.697981] ata2: hard resetting link
  965. [ 1142.206038] ata2: SATA link down (SStatus 0 SControl 300)
  966. [ 1142.206050] ata2: limiting SATA link speed to 1.5 Gbps
  967. [ 1142.370248] ata2: hard resetting link
  968. [ 1143.211019] ata3: softreset failed (device not ready)
  969. [ 1143.211024] ata3: applying SB600 PMP SRST workaround and retrying
  970. [ 1143.364157] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  971. [ 1143.365518] ata3.00: configured for UDMA/133
  972. [ 1143.365522] ata3: EH complete
  973. [ 1143.440036] ata2: SATA link down (SStatus 0 SControl 310)
  974. [ 1143.440047] ata2.00: disabled
  975. [ 1143.440061] ata2: EH complete
  976. [ 1143.440070] ata2.00: detaching (SCSI 1:0:0:0)
  977. [ 1143.449810] xfs_force_shutdown(sdb1,0x1) called from line 1025 of file fs/xfs/linux-2.6/xfs_buf.c.  Return address = 0xffffffff8125061d
  978. [ 1143.449819] Filesystem "sdb1": I/O Error Detected.  Shutting down filesystem: sdb1
  979. [ 1143.449821] Please umount the filesystem, and rectify the problem(s)
  980. [ 1143.454112] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
  981. [ 1143.454154] sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
  982. [ 1143.454157] sd 1:0:0:0: [sdb] Stopping disk
  983. [ 1143.454164] sd 1:0:0:0: [sdb] START_STOP FAILED
  984. [ 1143.454165] sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
  985. [ 1143.454971] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  986. [ 1143.454975] ata2: irq_stat 0x00000040, connection status changed
  987. [ 1143.454978] ata2: SError: { CommWake 10B8B DevExch }
  988. [ 1143.454985] ata2: hard resetting link
  989. [ 1145.503165] ata2: SATA link down (SStatus 0 SControl 300)
  990. [ 1145.503177] ata2: EH complete
  991. [ 1145.512967] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen
  992. [ 1145.512971] ata2: irq_stat 0x00000040, connection status changed
  993. [ 1145.512974] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
  994. [ 1145.512981] ata2: limiting SATA link speed to 1.5 Gbps
  995. [ 1145.512985] ata2: hard resetting link
  996. [ 1149.286146] Filesystem "sdb1": xfs_log_force: error 5 returned.
  997. [ 1152.974144] ata2: softreset failed (device not ready)
  998. [ 1152.974149] ata2: applying SB600 PMP SRST workaround and retrying
  999. [ 1153.127156] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1000. [ 1153.149701] ata2.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133
  1001. [ 1153.149705] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  1002. [ 1153.151858] ata2.00: configured for UDMA/133
  1003. [ 1153.151866] ata2: EH complete
  1004. [ 1153.151961] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5
  1005. [ 1153.152127] sd 1:0:0:0: Attached scsi generic sg1 type 0
  1006. [ 1153.153319] sd 1:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  1007. [ 1153.153367] sd 1:0:0:0: [sdf] Write Protect is off
  1008. [ 1153.153370] sd 1:0:0:0: [sdf] Mode Sense: 00 3a 00 00
  1009. [ 1153.153389] sd 1:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1010. [ 1153.153605]  sdf: sdf1
  1011. [ 1153.160614] sd 1:0:0:0: [sdf] Attached SCSI disk
  1012. [ 1157.505778] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
  1013. [ 1157.505782] ata2: irq_stat 0x00400000, PHY RDY changed
  1014. [ 1157.505784] ata2: SError: { Persist PHYRdyChg 10B8B }
  1015. [ 1157.505790] ata2: hard resetting link
  1016. [ 1163.991148] ata2: softreset failed (device not ready)
  1017. [ 1163.991153] ata2: applying SB600 PMP SRST workaround and retrying
  1018. [ 1164.144618] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1019. [ 1164.176479] ata2.00: configured for UDMA/133
  1020. [ 1164.176486] ata2: EH complete
  1021. [ 1179.286148] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1022. [ 1209.286151] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1023. [ 1239.286144] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1024. [ 1269.286145] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1025. [ 1299.286148] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1026. [ 1329.286143] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1027. [ 1359.286143] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1028. [ 1389.286142] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1029. [ 1419.286142] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1030. [ 1449.286142] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1031. [ 1450.723151] usb 3-4: new high speed USB device using ehci_hcd and address 2
  1032. [ 1450.841909] usb 3-4: New USB device found, idVendor=1005, idProduct=b113
  1033. [ 1450.841913] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1034. [ 1450.841915] usb 3-4: Product: USB FLASH DRIVE
  1035. [ 1450.841917] usb 3-4: Manufacturer:         
  1036. [ 1450.841918] usb 3-4: SerialNumber: 196B1E037C64
  1037. [ 1451.117248] Initializing USB Mass Storage driver...
  1038. [ 1451.117402] scsi8 : usb-storage 3-4:1.0
  1039. [ 1451.117492] usbcore: registered new interface driver usb-storage
  1040. [ 1451.117493] USB Mass Storage support registered.
  1041. [ 1452.117769] scsi 8:0:0:0: Direct-Access              USB FLASH DRIVE  34CH PQ: 0 ANSI: 0 CCS
  1042. [ 1452.118540] sd 8:0:0:0: Attached scsi generic sg6 type 0
  1043. [ 1452.324219] sd 8:0:0:0: [sdg] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
  1044. [ 1452.324771] sd 8:0:0:0: [sdg] Write Protect is off
  1045. [ 1452.324773] sd 8:0:0:0: [sdg] Mode Sense: 23 00 00 00
  1046. [ 1452.324775] sd 8:0:0:0: [sdg] Assuming drive cache: write through
  1047. [ 1452.326805] sd 8:0:0:0: [sdg] Assuming drive cache: write through
  1048. [ 1452.326810]  sdg: sdg1 sdg2
  1049. [ 1452.330174] sd 8:0:0:0: [sdg] Assuming drive cache: write through
  1050. [ 1452.330179] sd 8:0:0:0: [sdg] Attached SCSI removable disk
  1051. [ 1464.055395] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1052. [ 1479.286144] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1053. [ 1509.286142] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1054. [ 1512.725750] usb 3-4: USB disconnect, address 2
  1055. [ 1539.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1056. [ 1569.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1057. [ 1599.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1058. [ 1629.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1059. [ 1659.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1060. [ 1689.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1061. [ 1719.286142] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1062. [ 1749.286142] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1063. [ 1762.647745] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
  1064. [ 1762.647749] ata2: irq_stat 0x00400000, PHY RDY changed
  1065. [ 1762.647751] ata2: SError: { Persist PHYRdyChg 10B8B }
  1066. [ 1762.647757] ata2: hard resetting link
  1067. [ 1762.647772] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
  1068. [ 1762.647774] ata3: irq_stat 0x00400000, PHY RDY changed
  1069. [ 1762.647776] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B }
  1070. [ 1762.647778] ata3: hard resetting link
  1071. [ 1765.087037] ata2: SATA link down (SStatus 0 SControl 310)
  1072. [ 1765.117418] ata2: hard resetting link
  1073. [ 1765.626036] ata2: SATA link down (SStatus 0 SControl 310)
  1074. [ 1765.669558] ata2: hard resetting link
  1075. [ 1766.739038] ata2: SATA link down (SStatus 0 SControl 310)
  1076. [ 1766.739048] ata2.00: disabled
  1077. [ 1766.739060] ata2: EH complete
  1078. [ 1766.739068] ata2.00: detaching (SCSI 1:0:0:0)
  1079. [ 1766.742158] sd 1:0:0:0: [sdf] Synchronizing SCSI cache
  1080. [ 1766.742808] sd 1:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
  1081. [ 1766.742812] sd 1:0:0:0: [sdf] Stopping disk
  1082. [ 1766.742820] sd 1:0:0:0: [sdf] START_STOP FAILED
  1083. [ 1766.742821] sd 1:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
  1084. [ 1766.940037] ata3: SATA link down (SStatus 0 SControl 300)
  1085. [ 1766.962692] ata3: hard resetting link
  1086. [ 1767.471166] ata3: SATA link down (SStatus 0 SControl 300)
  1087. [ 1767.471178] ata3: limiting SATA link speed to 1.5 Gbps
  1088. [ 1767.499423] ata3: hard resetting link
  1089. [ 1767.959037] ata3: SATA link down (SStatus 0 SControl 310)
  1090. [ 1767.959048] ata3.00: disabled
  1091. [ 1767.959060] ata3: EH complete
  1092. [ 1767.959069] ata3.00: detaching (SCSI 2:0:0:0)
  1093. [ 1767.959072] sd 2:0:0:0: rejecting I/O to offline device
  1094. [ 1767.959111] sd 2:0:0:0: [sdc] Unhandled error code
  1095. [ 1767.959113] sd 2:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
  1096. [ 1767.959116] sd 2:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 2b 53 d7 87 00 01 00 00
  1097. [ 1767.959122] end_request: I/O error, dev sdc, sector 726914951
  1098. [ 1767.994446] xfs_force_shutdown(sdc1,0x1) called from line 1025 of file fs/xfs/linux-2.6/xfs_buf.c.  Return address = 0xffffffff8125061d
  1099. [ 1767.994455] Filesystem "sdc1": I/O Error Detected.  Shutting down filesystem: sdc1
  1100. [ 1767.994457] Please umount the filesystem, and rectify the problem(s)
  1101. [ 1767.996774] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen
  1102. [ 1767.996778] ata3: irq_stat 0x00000040, connection status changed
  1103. [ 1767.996781] ata3: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
  1104. [ 1767.996790] ata3: hard resetting link
  1105. [ 1768.029282] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1106. [ 1768.029286] ata2: irq_stat 0x00000040, connection status changed
  1107. [ 1768.029289] ata2: SError: { CommWake 10B8B DevExch }
  1108. [ 1768.029298] ata2: hard resetting link
  1109. [ 1768.056812] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
  1110. [ 1768.752034] ata2: SATA link down (SStatus 0 SControl 300)
  1111. [ 1768.752046] ata2: EH complete
  1112. [ 1769.506473] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen
  1113. [ 1769.506476] ata2: irq_stat 0x00000040, connection status changed
  1114. [ 1769.506479] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
  1115. [ 1769.506487] ata2: limiting SATA link speed to 1.5 Gbps
  1116. [ 1769.506490] ata2: hard resetting link
  1117. [ 1770.591150] ata3: COMRESET failed (errno=-32)
  1118. [ 1770.591158] ata3: reset failed (errno=-32), retrying in 8 secs
  1119. [ 1771.945142] ata2: COMRESET failed (errno=-32)
  1120. [ 1771.945149] ata2: reset failed (errno=-32), retrying in 8 secs
  1121. [ 1777.996142] ata3: limiting SATA link speed to 1.5 Gbps
  1122. [ 1777.996146] ata3: hard resetting link
  1123. [ 1779.286142] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1124. [ 1779.506142] ata2: hard resetting link
  1125. [ 1779.507017] Filesystem "sdc1": xfs_log_force: error 5 returned.
  1126. [ 1779.810164] ata3: SATA link down (SStatus 0 SControl 310)
  1127. [ 1779.810176] ata3: EH complete
  1128. [ 1779.810218] sd 2:0:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
  1129. [ 1779.810221] sd 2:0:0:0: [sdc] Stopping disk
  1130. [ 1779.810229] sd 2:0:0:0: [sdc] START_STOP FAILED
  1131. [ 1779.810231] sd 2:0:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
  1132. [ 1779.815703] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1133. [ 1779.815707] ata3: irq_stat 0x00000040, connection status changed
  1134. [ 1779.815710] ata3: SError: { CommWake 10B8B DevExch }
  1135. [ 1779.815716] ata3: limiting SATA link speed to 1.5 Gbps
  1136. [ 1779.815720] ata3: hard resetting link
  1137. [ 1781.737018] ata2: COMRESET failed (errno=-32)
  1138. [ 1781.737025] ata2: reset failed (errno=-32), retrying in 8 secs
  1139. [ 1785.162035] ata3: SATA link down (SStatus 0 SControl 310)
  1140. [ 1785.162047] ata3: EH complete
  1141. [ 1785.172847] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1142. [ 1785.172850] ata3: irq_stat 0x00000040, connection status changed
  1143. [ 1785.172853] ata3: SError: { CommWake 10B8B DevExch }
  1144. [ 1785.172860] ata3: limiting SATA link speed to 1.5 Gbps
  1145. [ 1785.172863] ata3: hard resetting link
  1146. [ 1789.506018] ata2: hard resetting link
  1147. [ 1790.433042] ata2: SATA link down (SStatus 0 SControl 310)
  1148. [ 1790.433054] ata2: EH complete
  1149. [ 1790.488411] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1150. [ 1790.488415] ata2: irq_stat 0x00000040, connection status changed
  1151. [ 1790.488418] ata2: SError: { CommWake 10B8B DevExch }
  1152. [ 1790.488424] ata2: limiting SATA link speed to 1.5 Gbps
  1153. [ 1790.488428] ata2: hard resetting link
  1154. [ 1792.798020] ata2: COMRESET failed (errno=-32)
  1155. [ 1792.798027] ata2: reset failed (errno=-32), retrying in 8 secs
  1156. [ 1793.906020] ata3: softreset failed (device not ready)
  1157. [ 1793.906025] ata3: applying SB600 PMP SRST workaround and retrying
  1158. [ 1794.059032] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1159. [ 1794.059677] ata3.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133
  1160. [ 1794.059680] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  1161. [ 1794.060446] ata3.00: configured for UDMA/133
  1162. [ 1794.060453] ata3: EH complete
  1163. [ 1794.060556] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5
  1164. [ 1794.060700] sd 2:0:0:0: Attached scsi generic sg1 type 0
  1165. [ 1794.060799] sd 2:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  1166. [ 1794.060842] sd 2:0:0:0: [sdf] Write Protect is off
  1167. [ 1794.060844] sd 2:0:0:0: [sdf] Mode Sense: 00 3a 00 00
  1168. [ 1794.060862] sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1169. [ 1794.060995]  sdf: sdf1
  1170. [ 1794.084072] sd 2:0:0:0: [sdf] Attached SCSI disk
  1171. [ 1794.227042] ata3.00: exception Emask 0x50 SAct 0x1 SErr 0x90a00 action 0xe frozen
  1172. [ 1794.227045] ata3.00: irq_stat 0x01400000, PHY RDY changed
  1173. [ 1794.227048] ata3: SError: { Persist HostInt PHYRdyChg 10B8B }
  1174. [ 1794.227052] ata3.00: failed command: READ FPDMA QUEUED
  1175. [ 1794.227056] ata3.00: cmd 60/08:00:3f:10:00/00:00:00:00:00/40 tag 0 ncq 4096 in
  1176. [ 1794.227057]          res 40/00:04:3f:10:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
  1177. [ 1794.227059] ata3.00: status: { DRDY }
  1178. [ 1794.227064] ata3: hard resetting link
  1179. [ 1800.084143] ata3: softreset failed (device not ready)
  1180. [ 1800.084148] ata3: applying SB600 PMP SRST workaround and retrying
  1181. [ 1800.237155] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1182. [ 1800.238549] ata3.00: configured for UDMA/133
  1183. [ 1800.238559] ata3: EH complete
  1184. [ 1800.488017] ata2: hard resetting link
  1185. [ 1802.282036] ata2: SATA link down (SStatus 0 SControl 310)
  1186. [ 1802.282048] ata2: EH complete
  1187. [ 1802.317792] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1188. [ 1802.317795] ata2: irq_stat 0x00000040, connection status changed
  1189. [ 1802.317798] ata2: SError: { CommWake 10B8B DevExch }
  1190. [ 1802.317805] ata2: limiting SATA link speed to 1.5 Gbps
  1191. [ 1802.317809] ata2: hard resetting link
  1192. [ 1804.626018] ata2: COMRESET failed (errno=-32)
  1193. [ 1804.626025] ata2: reset failed (errno=-32), retrying in 8 secs
  1194. [ 1806.096856] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
  1195. [ 1806.096859] ata3: irq_stat 0x00400000, PHY RDY changed
  1196. [ 1806.096862] ata3: SError: { Persist PHYRdyChg 10B8B }
  1197. [ 1806.096868] ata3: hard resetting link
  1198. [ 1809.286140] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1199. [ 1809.531017] Filesystem "sdc1": xfs_log_force: error 5 returned.
  1200. [ 1809.829037] ata3: SATA link down (SStatus 0 SControl 310)
  1201. [ 1809.846818] ata3: hard resetting link
  1202. [ 1810.406036] ata3: SATA link down (SStatus 0 SControl 310)
  1203. [ 1810.425162] ata3: hard resetting link
  1204. [ 1812.317017] ata2: hard resetting link
  1205. [ 1814.861021] ata3: softreset failed (device not ready)
  1206. [ 1814.861025] ata3: applying SB600 PMP SRST workaround and retrying
  1207. [ 1815.014033] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1208. [ 1815.015412] ata3.00: configured for UDMA/133
  1209. [ 1815.015417] ata3: EH complete
  1210. [ 1822.341142] ata2: softreset failed (device not ready)
  1211. [ 1822.341147] ata2: hard resetting link
  1212. [ 1824.033143] ata2: softreset failed (device not ready)
  1213. [ 1824.033148] ata2: applying SB600 PMP SRST workaround and retrying
  1214. [ 1824.186161] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1215. [ 1824.215607] ata2.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133
  1216. [ 1824.215611] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  1217. [ 1824.217750] ata2.00: configured for UDMA/133
  1218. [ 1824.217757] ata2: EH complete
  1219. [ 1824.217857] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5
  1220. [ 1824.218002] sd 1:0:0:0: Attached scsi generic sg2 type 0
  1221. [ 1824.218095] sd 1:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  1222. [ 1824.218240] sd 1:0:0:0: [sdg] Write Protect is off
  1223. [ 1824.218242] sd 1:0:0:0: [sdg] Mode Sense: 00 3a 00 00
  1224. [ 1824.218260] sd 1:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1225. [ 1824.218386]  sdg: sdg1
  1226. [ 1824.226434] sd 1:0:0:0: [sdg] Attached SCSI disk
  1227. [ 1834.786015] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
  1228. [ 1834.786018] ata2: irq_stat 0x00400000, PHY RDY changed
  1229. [ 1834.786021] ata2: SError: { Persist PHYRdyChg 10B8B }
  1230. [ 1834.786026] ata2: hard resetting link
  1231. [ 1835.968035] ata2: SATA link down (SStatus 0 SControl 310)
  1232. [ 1836.019733] ata2: hard resetting link
  1233. [ 1836.375037] ata2: SATA link down (SStatus 0 SControl 310)
  1234. [ 1836.664820] ata2: hard resetting link
  1235. [ 1837.020037] ata2: SATA link down (SStatus 0 SControl 310)
  1236. [ 1837.020047] ata2.00: disabled
  1237. [ 1837.020059] ata2: EH complete
  1238. [ 1837.020069] ata2.00: detaching (SCSI 1:0:0:0)
  1239. [ 1837.022282] sd 1:0:0:0: [sdg] Synchronizing SCSI cache
  1240. [ 1837.022330] sd 1:0:0:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00
  1241. [ 1837.022333] sd 1:0:0:0: [sdg] Stopping disk
  1242. [ 1837.022341] sd 1:0:0:0: [sdg] START_STOP FAILED
  1243. [ 1837.022343] sd 1:0:0:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00
  1244. [ 1837.067706] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1245. [ 1837.067710] ata2: irq_stat 0x00000040, connection status changed
  1246. [ 1837.067712] ata2: SError: { CommWake 10B8B DevExch }
  1247. [ 1837.067720] ata2: hard resetting link
  1248. [ 1839.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1249. [ 1839.531021] Filesystem "sdc1": xfs_log_force: error 5 returned.
  1250. [ 1843.543165] ata2: SATA link down (SStatus 0 SControl 300)
  1251. [ 1843.543177] ata2: EH complete
  1252. [ 1843.562756] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen
  1253. [ 1843.562758] ata2: irq_stat 0x00000040, connection status changed
  1254. [ 1843.562760] ata2: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
  1255. [ 1843.562767] ata2: limiting SATA link speed to 1.5 Gbps
  1256. [ 1843.562770] ata2: hard resetting link
  1257. [ 1845.556482] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
  1258. [ 1845.556486] ata3: irq_stat 0x00400000, PHY RDY changed
  1259. [ 1845.556488] ata3: SError: { Persist PHYRdyChg 10B8B }
  1260. [ 1845.556494] ata3: hard resetting link
  1261. [ 1845.571162] ata2: SATA link down (SStatus 0 SControl 310)
  1262. [ 1845.571173] ata2: EH complete
  1263. [ 1845.610294] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1264. [ 1845.610297] ata2: irq_stat 0x00000040, connection status changed
  1265. [ 1845.610300] ata2: SError: { CommWake 10B8B DevExch }
  1266. [ 1845.610307] ata2: limiting SATA link speed to 1.5 Gbps
  1267. [ 1845.610310] ata2: hard resetting link
  1268. [ 1847.214162] ata3: SATA link down (SStatus 0 SControl 310)
  1269. [ 1847.220305] ata3: hard resetting link
  1270. [ 1847.780165] ata3: SATA link down (SStatus 0 SControl 310)
  1271. [ 1847.798955] ata3: hard resetting link
  1272. [ 1847.815017] ata2: COMRESET failed (errno=-32)
  1273. [ 1847.815024] ata2: reset failed (errno=-32), retrying in 8 secs
  1274. [ 1848.358047] ata3: SATA link down (SStatus 0 SControl 310)
  1275. [ 1848.358058] ata3.00: disabled
  1276. [ 1848.358071] ata3: EH complete
  1277. [ 1848.358081] ata3.00: detaching (SCSI 2:0:0:0)
  1278. [ 1848.361236] sd 2:0:0:0: [sdf] Synchronizing SCSI cache
  1279. [ 1848.361283] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
  1280. [ 1848.361286] sd 2:0:0:0: [sdf] Stopping disk
  1281. [ 1848.361294] sd 2:0:0:0: [sdf] START_STOP FAILED
  1282. [ 1848.361295] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
  1283. [ 1848.377297] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1284. [ 1848.377301] ata3: irq_stat 0x00000040, connection status changed
  1285. [ 1848.377303] ata3: SError: { CommWake 10B8B DevExch }
  1286. [ 1848.377310] ata3: hard resetting link
  1287. [ 1850.969163] ata3: SATA link down (SStatus 0 SControl 300)
  1288. [ 1850.969175] ata3: EH complete
  1289. [ 1851.000381] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen
  1290. [ 1851.000383] ata3: irq_stat 0x00000040, connection status changed
  1291. [ 1851.000386] ata3: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
  1292. [ 1851.000393] ata3: limiting SATA link speed to 1.5 Gbps
  1293. [ 1851.000396] ata3: hard resetting link
  1294. [ 1853.204164] ata3: SATA link down (SStatus 0 SControl 310)
  1295. [ 1853.204176] ata3: EH complete
  1296. [ 1853.206403] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1297. [ 1853.206405] ata3: irq_stat 0x00000040, connection status changed
  1298. [ 1853.206408] ata3: SError: { CommWake 10B8B DevExch }
  1299. [ 1853.206414] ata3: limiting SATA link speed to 1.5 Gbps
  1300. [ 1853.206417] ata3: hard resetting link
  1301. [ 1855.610019] ata2: hard resetting link
  1302. [ 1859.999141] ata3: softreset failed (device not ready)
  1303. [ 1859.999146] ata3: applying SB600 PMP SRST workaround and retrying
  1304. [ 1860.152155] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1305. [ 1860.152806] ata3.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133
  1306. [ 1860.152808] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  1307. [ 1860.153537] ata3.00: configured for UDMA/133
  1308. [ 1860.153544] ata3: EH complete
  1309. [ 1860.153640] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5
  1310. [ 1860.153784] sd 2:0:0:0: Attached scsi generic sg1 type 0
  1311. [ 1860.153884] sd 2:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  1312. [ 1860.153926] sd 2:0:0:0: [sdf] Write Protect is off
  1313. [ 1860.153929] sd 2:0:0:0: [sdf] Mode Sense: 00 3a 00 00
  1314. [ 1860.153947] sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1315. [ 1860.154075]  sdf: sdf1
  1316. [ 1860.180603] sd 2:0:0:0: [sdf] Attached SCSI disk
  1317. [ 1863.932041] ata2: SATA link down (SStatus 0 SControl 310)
  1318. [ 1863.932047] ata2: illegal qc_active transition (00000000->00000001)
  1319. [ 1863.932061] ata2: EH complete
  1320. [ 1863.943434] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1321. [ 1863.943436] ata2: irq_stat 0x00000040, connection status changed
  1322. [ 1863.943439] ata2: SError: { CommWake 10B8B DevExch }
  1323. [ 1863.943445] ata2: limiting SATA link speed to 1.5 Gbps
  1324. [ 1863.943448] ata2: hard resetting link
  1325. [ 1865.788037] ata2: SATA link down (SStatus 0 SControl 310)
  1326. [ 1865.788049] ata2: EH complete
  1327. [ 1867.584234] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1328. [ 1867.584237] ata2: irq_stat 0x00000040, connection status changed
  1329. [ 1867.584240] ata2: SError: { CommWake 10B8B DevExch }
  1330. [ 1867.584247] ata2: limiting SATA link speed to 1.5 Gbps
  1331. [ 1867.584251] ata2: hard resetting link
  1332. [ 1869.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1333. [ 1869.531017] Filesystem "sdc1": xfs_log_force: error 5 returned.
  1334. [ 1869.815015] ata2: COMRESET failed (errno=-32)
  1335. [ 1869.815022] ata2: reset failed (errno=-32), retrying in 8 secs
  1336. [ 1877.584020] ata2: hard resetting link
  1337. [ 1883.611018] ata2: softreset failed (device not ready)
  1338. [ 1883.611023] ata2: applying SB600 PMP SRST workaround and retrying
  1339. [ 1883.764032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1340. [ 1883.785466] ata2.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133
  1341. [ 1883.785470] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  1342. [ 1883.787607] ata2.00: configured for UDMA/133
  1343. [ 1883.787614] ata2: EH complete
  1344. [ 1883.787714] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5
  1345. [ 1883.787865] sd 1:0:0:0: Attached scsi generic sg2 type 0
  1346. [ 1883.787960] sd 1:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  1347. [ 1883.788005] sd 1:0:0:0: [sdg] Write Protect is off
  1348. [ 1883.788008] sd 1:0:0:0: [sdg] Mode Sense: 00 3a 00 00
  1349. [ 1883.788026] sd 1:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1350. [ 1883.789899]  sdg: sdg1
  1351. [ 1883.796280] sd 1:0:0:0: [sdg] Attached SCSI disk
  1352. [ 1885.202267] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
  1353. [ 1885.202270] ata2: irq_stat 0x00400000, PHY RDY changed
  1354. [ 1885.202273] ata2: SError: { Persist PHYRdyChg 10B8B }
  1355. [ 1885.202279] ata2: hard resetting link
  1356. [ 1887.857169] ata2: SATA link down (SStatus 0 SControl 310)
  1357. [ 1887.878038] ata2: hard resetting link
  1358. [ 1888.387164] ata2: SATA link down (SStatus 0 SControl 310)
  1359. [ 1888.431142] ata2: hard resetting link
  1360. [ 1888.930425] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
  1361. [ 1888.930429] ata3: irq_stat 0x00400000, PHY RDY changed
  1362. [ 1888.930432] ata3: SError: { Persist PHYRdyChg 10B8B }
  1363. [ 1888.930437] ata3: hard resetting link
  1364. [ 1888.940166] ata2: SATA link down (SStatus 0 SControl 310)
  1365. [ 1888.940177] ata2.00: disabled
  1366. [ 1888.940189] ata2: EH complete
  1367. [ 1888.940197] ata2.00: detaching (SCSI 1:0:0:0)
  1368. [ 1888.942348] sd 1:0:0:0: [sdg] Synchronizing SCSI cache
  1369. [ 1888.942396] sd 1:0:0:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00
  1370. [ 1888.942399] sd 1:0:0:0: [sdg] Stopping disk
  1371. [ 1888.942407] sd 1:0:0:0: [sdg] START_STOP FAILED
  1372. [ 1888.942408] sd 1:0:0:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00
  1373. [ 1888.984244] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1374. [ 1888.984247] ata2: irq_stat 0x00000040, connection status changed
  1375. [ 1888.984250] ata2: SError: { CommWake 10B8B DevExch }
  1376. [ 1888.984257] ata2: hard resetting link
  1377. [ 1891.218141] ata2: COMRESET failed (errno=-32)
  1378. [ 1891.218148] ata2: reset failed (errno=-32), retrying in 8 secs
  1379. [ 1893.019168] ata3: SATA link down (SStatus 0 SControl 310)
  1380. [ 1893.040822] ata3: hard resetting link
  1381. [ 1893.600037] ata3: SATA link down (SStatus 0 SControl 310)
  1382. [ 1893.619227] ata3: hard resetting link
  1383. [ 1894.179036] ata3: SATA link down (SStatus 0 SControl 310)
  1384. [ 1894.179047] ata3.00: disabled
  1385. [ 1894.179058] ata3: EH complete
  1386. [ 1894.179067] ata3.00: detaching (SCSI 2:0:0:0)
  1387. [ 1894.182242] sd 2:0:0:0: [sdf] Synchronizing SCSI cache
  1388. [ 1894.182294] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
  1389. [ 1894.182297] sd 2:0:0:0: [sdf] Stopping disk
  1390. [ 1894.182305] sd 2:0:0:0: [sdf] START_STOP FAILED
  1391. [ 1894.182307] sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
  1392. [ 1894.197574] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1393. [ 1894.197577] ata3: irq_stat 0x00000040, connection status changed
  1394. [ 1894.197580] ata3: SError: { CommWake 10B8B DevExch }
  1395. [ 1894.197587] ata3: hard resetting link
  1396. [ 1896.506036] ata3: SATA link down (SStatus 0 SControl 300)
  1397. [ 1896.506048] ata3: EH complete
  1398. [ 1896.511463] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen
  1399. [ 1896.511465] ata3: irq_stat 0x00000040, connection status changed
  1400. [ 1896.511468] ata3: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
  1401. [ 1896.511474] ata3: limiting SATA link speed to 1.5 Gbps
  1402. [ 1896.511477] ata3: hard resetting link
  1403. [ 1898.771036] ata3: SATA link down (SStatus 0 SControl 310)
  1404. [ 1898.771048] ata3: EH complete
  1405. [ 1898.984140] ata2: limiting SATA link speed to 1.5 Gbps
  1406. [ 1898.984145] ata2: hard resetting link
  1407. [ 1899.286142] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1408. [ 1899.531017] Filesystem "sdc1": xfs_log_force: error 5 returned.
  1409. [ 1899.707160] ata2: SATA link down (SStatus 0 SControl 310)
  1410. [ 1899.707172] ata2: EH complete
  1411. [ 1900.456506] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1412. [ 1900.456509] ata3: irq_stat 0x00000040, connection status changed
  1413. [ 1900.456512] ata3: SError: { CommWake 10B8B DevExch }
  1414. [ 1900.456519] ata3: limiting SATA link speed to 1.5 Gbps
  1415. [ 1900.456523] ata3: hard resetting link
  1416. [ 1900.503033] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1417. [ 1900.503036] ata2: irq_stat 0x00000040, connection status changed
  1418. [ 1900.503039] ata2: SError: { CommWake 10B8B DevExch }
  1419. [ 1900.503045] ata2: limiting SATA link speed to 1.5 Gbps
  1420. [ 1900.503049] ata2: hard resetting link
  1421. [ 1901.434159] ata2: SATA link down (SStatus 0 SControl 310)
  1422. [ 1901.434171] ata2: EH complete
  1423. [ 1903.051017] ata3: COMRESET failed (errno=-32)
  1424. [ 1903.051024] ata3: reset failed (errno=-32), retrying in 8 secs
  1425. [ 1910.456017] ata3: hard resetting link
  1426. [ 1911.179160] ata3: SATA link down (SStatus 0 SControl 310)
  1427. [ 1911.179172] ata3: EH complete
  1428. [ 1912.119726] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1429. [ 1912.119730] ata3: irq_stat 0x00000040, connection status changed
  1430. [ 1912.119733] ata3: SError: { CommWake 10B8B DevExch }
  1431. [ 1912.119739] ata3: limiting SATA link speed to 1.5 Gbps
  1432. [ 1912.119743] ata3: hard resetting link
  1433. [ 1912.122750] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1434. [ 1912.122752] ata2: irq_stat 0x00000040, connection status changed
  1435. [ 1912.122754] ata2: SError: { CommWake 10B8B DevExch }
  1436. [ 1912.122758] ata2: limiting SATA link speed to 1.5 Gbps
  1437. [ 1912.122759] ata2: hard resetting link
  1438. [ 1914.689142] ata3: COMRESET failed (errno=-32)
  1439. [ 1914.689149] ata3: reset failed (errno=-32), retrying in 8 secs
  1440. [ 1914.691138] ata2: COMRESET failed (errno=-32)
  1441. [ 1914.691142] ata2: reset failed (errno=-32), retrying in 8 secs
  1442. [ 1922.119142] ata3: hard resetting link
  1443. [ 1922.122137] ata2: hard resetting link
  1444. [ 1923.001164] ata2: SATA link down (SStatus 0 SControl 310)
  1445. [ 1923.001176] ata2: EH complete
  1446. [ 1923.466159] ata3: SATA link down (SStatus 0 SControl 310)
  1447. [ 1923.466171] ata3: EH complete
  1448. [ 1924.100893] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1449. [ 1924.100897] ata3: irq_stat 0x00000040, connection status changed
  1450. [ 1924.100900] ata3: SError: { CommWake 10B8B DevExch }
  1451. [ 1924.100907] ata3: limiting SATA link speed to 1.5 Gbps
  1452. [ 1924.100910] ata3: hard resetting link
  1453. [ 1924.236250] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1454. [ 1924.236253] ata2: irq_stat 0x00000040, connection status changed
  1455. [ 1924.236256] ata2: SError: { CommWake 10B8B DevExch }
  1456. [ 1924.236263] ata2: limiting SATA link speed to 1.5 Gbps
  1457. [ 1924.236266] ata2: hard resetting link
  1458. [ 1925.583159] ata2: SATA link down (SStatus 0 SControl 310)
  1459. [ 1925.583171] ata2: EH complete
  1460. [ 1926.123160] ata3: SATA link down (SStatus 0 SControl 310)
  1461. [ 1926.123172] ata3: EH complete
  1462. [ 1926.149495] ata3: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1463. [ 1926.149499] ata3: irq_stat 0x00000040, connection status changed
  1464. [ 1926.149501] ata3: SError: { CommWake 10B8B DevExch }
  1465. [ 1926.149508] ata3: limiting SATA link speed to 1.5 Gbps
  1466. [ 1926.149512] ata3: hard resetting link
  1467. [ 1926.176665] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  1468. [ 1926.176669] ata2: irq_stat 0x00000040, connection status changed
  1469. [ 1926.176671] ata2: SError: { CommWake 10B8B DevExch }
  1470. [ 1926.176678] ata2: limiting SATA link speed to 1.5 Gbps
  1471. [ 1926.176682] ata2: hard resetting link
  1472. [ 1929.286141] Filesystem "sdb1": xfs_log_force: error 5 returned.
  1473. [ 1929.531016] Filesystem "sdc1": xfs_log_force: error 5 returned.

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will expire by default in one month. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right