rendered paste bodyLinux version 2.6.32.10 (root@pc) (gcc version 4.4.3 (Debian 4.4.3-4) ) #29 SMP PREEMPT Tue Mar 23 12:54:56 CET 2010
Command line: root=/dev/sda1 selinux=0 xen-pciback.hide=(03:00.0)(00:1d.0) physdev_dom0_hide=(03:00.0)(00:1d.0) xen-pciback.permissive
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000008f000 (usable)
Xen: 000000000008f000 - 0000000000090000 (reserved)
Xen: 0000000000090000 - 000000000009d000 (usable)
Xen: 000000000009d000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000bf4bd000 (usable)
Xen: 00000000bf4bd000 - 00000000bf4bf000 (reserved)
Xen: 00000000bf4bf000 - 00000000bf552000 (usable)
Xen: 00000000bf552000 - 00000000bf7bf000 (ACPI NVS)
Xen: 00000000bf7bf000 - 00000000bf7df000 (usable)
Xen: 00000000bf7df000 - 00000000bf7ff000 (ACPI data)
Xen: 00000000bf7ff000 - 00000000bf800000 (usable)
Xen: 00000000bf800000 - 00000000c0000000 (reserved)
Xen: 00000000f8000000 - 00000000fd000000 (reserved)
Xen: 00000000fec00000 - 00000000fec01000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ffe00000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 00000001f03ad000 (usable)
DMI 2.5 present.
last_pfn = 0x1f03ad max_arch_pfn = 0x400000000
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000008f000 (usable)
modified: 000000000008f000 - 0000000000090000 (reserved)
modified: 0000000000090000 - 000000000009d000 (usable)
modified: 000000000009d000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf4bd000 (usable)
modified: 00000000bf4bd000 - 00000000bf4bf000 (reserved)
modified: 00000000bf4bf000 - 00000000bf552000 (usable)
modified: 00000000bf552000 - 00000000bf7bf000 (ACPI NVS)
modified: 00000000bf7bf000 - 00000000bf7df000 (usable)
modified: 00000000bf7df000 - 00000000bf7ff000 (ACPI data)
modified: 00000000bf7ff000 - 00000000bf800000 (usable)
modified: 00000000bf800000 - 00000000c0000000 (reserved)
modified: 00000000f8000000 - 00000000fd000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 00000001f03ad000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 4k
kernel direct mapping tables up to bf800000 @ 100000-700000
init_memory_mapping: 0000000100000000-00000001f03ad000
0100000000 - 01f03ad000 page 4k
kernel direct mapping tables up to 1f03ad000 @ 3397000-4322000
RAMDISK: 01778000 - 023f5000
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000bf7fe120 00074 (v01 INTEL DX58SO 0000139C 01000013)
ACPI: FACP 00000000bf7fd000 000F4 (v03 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0 (20090903/tbfadt-557)
ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20090903/tbfadt-607)
ACPI: DSDT 00000000bf7f8000 04641 (v02 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI: FACS 00000000bf727000 00040
ACPI: APIC 00000000bf7f7000 00138 (v02 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI: WDDT 00000000bf7f6000 00040 (v01 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI: MCFG 00000000bf7f5000 0003C (v01 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI: ASF! 00000000bf7f4000 000AC (v32 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI: HPET 00000000bf7f3000 00038 (v01 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI: SSDT 00000000bf7e2000 0E134 (v01 INTEL SSDT PM 0000139C MSFT 0100000D)
ACPI: 00000000bf7df000 00128 (v01 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI: WDTT 00000000bf7f1000 0020C (v02 INTEL DX58SO 0000139C MSFT 0100000D)
ACPI: ASPT 00000000bf7f2000 00034 (v04 INTEL PerfTune 0000139C MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
(9 early reservations) ==> bootmem [0000000000 - 01f03ad000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0003378000 - 0003397000] XEN PAGETABLES ==> [0003378000 - 0003397000]
#2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#3 [0001000000 - 0001757a0c] TEXT DATA BSS ==> [0001000000 - 0001757a0c]
#4 [0001778000 - 00023f5000] RAMDISK ==> [0001778000 - 00023f5000]
#5 [00023f5000 - 0003378000] XEN START INFO ==> [00023f5000 - 0003378000]
#6 [0001758000 - 000175810d] BRK ==> [0001758000 - 000175810d]
#7 [0000100000 - 00006de000] PGTABLE ==> [0000100000 - 00006de000]
#8 [0003397000 - 0003b1d000] PGTABLE ==> [0003397000 - 0003b1d000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x001f03ad
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x0000008f
0: 0x00000090 -> 0x0000009d
0: 0x00000100 -> 0x000bf4bd
0: 0x000bf4bf -> 0x000bf552
0: 0x000bf7bf -> 0x000bf7df
0: 0x000bf7ff -> 0x000bf800
0: 0x00100000 -> 0x001f03ad
On node 0 totalpages: 1767605
DMA zone: 56 pages used for memmap
DMA zone: 1505 pages reserved
DMA zone: 2430 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765353 pages, LIFO batch:31
Normal zone: 13453 pages used for memmap
Normal zone: 970528 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ERROR: Unable to locate IOAPIC for GSI 2
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ERROR: Unable to locate IOAPIC for GSI 9
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 256
Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
Booting paravirtualized kernel on Xen
Xen version: 4.0.0-rc6 (preserve-AD) (dom0)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880028038000 s78104 r8192 d24296 u110592
pcpu-alloc: s78104 r8192 d24296 u110592 alloc=27*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
trying to map vcpu_info 0 at ffff880028043020, mfn 2110cf, offset 32
cpu 0 using vcpu_info at ffff880028043020
trying to map vcpu_info 1 at ffff88002805e020, mfn 2110ea, offset 32
cpu 1 using vcpu_info at ffff88002805e020
trying to map vcpu_info 2 at ffff880028079020, mfn 211105, offset 32
cpu 2 using vcpu_info at ffff880028079020
trying to map vcpu_info 3 at ffff880028094020, mfn 211120, offset 32
cpu 3 using vcpu_info at ffff880028094020
trying to map vcpu_info 4 at ffff8800280af020, mfn 21113b, offset 32
cpu 4 using vcpu_info at ffff8800280af020
trying to map vcpu_info 5 at ffff8800280ca020, mfn 211156, offset 32
cpu 5 using vcpu_info at ffff8800280ca020
Xen: using vcpu_info placement
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1738311
Kernel command line: root=/dev/sda1 selinux=0 xen-pciback.hide=(03:00.0)(00:1d.0) physdev_dom0_hide=(03:00.0)(00:1d.0) xen-pciback.permissive
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Initializing CPU#0
DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
DMA: software IO TLB at phys 0x20000000 - 0x24000000
xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
xen_swiotlb_fixup: buf=ffff880024060000 size=32768
Memory: 6841552k/8130228k available (4366k kernel code, 1059808k absent, 227960k reserved, 1948k data, 476k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:1536
xen: registering gsi 0 triggering 1 polarity 0
xen: --> irq=0
Already setup the GSI :0
xen: registering gsi 1 triggering 1 polarity 0
xen: --> irq=1
Already setup the GSI :1
xen: registering gsi 2 triggering 1 polarity 0
xen: --> irq=2
Already setup the GSI :2
xen: registering gsi 3 triggering 1 polarity 0
xen: --> irq=3
Already setup the GSI :3
xen: registering gsi 4 triggering 1 polarity 0
xen: --> irq=4
Already setup the GSI :4
xen: registering gsi 5 triggering 1 polarity 0
xen: --> irq=5
Already setup the GSI :5
xen: registering gsi 6 triggering 1 polarity 0
xen: --> irq=6
Already setup the GSI :6
xen: registering gsi 7 triggering 1 polarity 0
xen: --> irq=7
Already setup the GSI :7
xen: registering gsi 8 triggering 1 polarity 0
xen: --> irq=8
Already setup the GSI :8
xen: registering gsi 9 triggering 1 polarity 0
xen: --> irq=9
Already setup the GSI :9
xen: registering gsi 10 triggering 1 polarity 0
xen: --> irq=10
Already setup the GSI :10
xen: registering gsi 11 triggering 1 polarity 0
xen: --> irq=11
Already setup the GSI :11
xen: registering gsi 12 triggering 1 polarity 0
xen: --> irq=12
Already setup the GSI :12
xen: registering gsi 13 triggering 1 polarity 0
xen: --> irq=13
Already setup the GSI :13
xen: registering gsi 14 triggering 1 polarity 0
xen: --> irq=14
Already setup the GSI :14
xen: registering gsi 15 triggering 1 polarity 0
xen: --> irq=15
Already setup the GSI :15
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
xen: registering gsi 9 triggering 0 polarity 0
xen_allocate_pirq: returning irq 9 for gsi 9
xen: --> irq=9
Already setup the GSI :9
xen: acpi sci 9
Console: colour VGA+ 80x25
console [tty0] enabled
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
alloc irq_desc for 1535 on node 0
alloc kstat_irqs on node 0
Detected 2702.612 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5405.22 BogoMIPS (lpj=2702612)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Unsupported number of siblings 16
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
alloc irq_desc for 1534 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1533 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1532 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1531 on node 0
alloc kstat_irqs on node 0
installing Xen timer for CPU 1
alloc irq_desc for 1530 on node 0
alloc kstat_irqs on node 0
SMP alternatives: switching to SMP code
alloc irq_desc for 1529 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1528 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1527 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1526 on node 0
alloc kstat_irqs on node 0
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Unsupported number of siblings 16
installing Xen timer for CPU 2
alloc irq_desc for 1525 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1524 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1523 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1522 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1521 on node 0
alloc kstat_irqs on node 0
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Unsupported number of siblings 16
installing Xen timer for CPU 3
alloc irq_desc for 1520 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1519 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1518 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1517 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1516 on node 0
alloc kstat_irqs on node 0
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Unsupported number of siblings 16
installing Xen timer for CPU 4
alloc irq_desc for 1515 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1514 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1513 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1512 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1511 on node 0
alloc kstat_irqs on node 0
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Unsupported number of siblings 16
installing Xen timer for CPU 5
alloc irq_desc for 1510 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1509 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1508 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1507 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1506 on node 0
alloc kstat_irqs on node 0
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU: Unsupported number of siblings 16
Brought up 6 CPUs
Grant table initialized
regulator: core version 0.5
NET: Registered protocol family 16
alloc irq_desc for 1505 on node 0
alloc kstat_irqs on node 0
xenbus_probe_init ok
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ERROR: Unable to locate IOAPIC for GSI 9
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [ ] - 48, should be 8C (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xc7200000-0xc721ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xc7223000-0xc7223fff]
pci 0000:00:19.0: reg 18 io port: [0x5100-0x511f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x50e0-0x50ff]
pci 0000:00:1a.1: reg 20 io port: [0x50c0-0x50df]
pci 0000:00:1a.2: reg 20 io port: [0x50a0-0x50bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xc7222000-0xc72223ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f]
pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f]
pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xc7221000-0xc72213ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
pci 0000:00:1f.2: reg 10 io port: [0x5128-0x512f]
pci 0000:00:1f.2: reg 14 io port: [0x5134-0x5137]
pci 0000:00:1f.2: reg 18 io port: [0x5120-0x5127]
pci 0000:00:1f.2: reg 1c io port: [0x5130-0x5133]
pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xc7220000-0xc72207ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf0000000-0xf00000ff]
pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
pci 0000:02:00.0: reg 10 32bit mmio: [0xc6000000-0xc6ffffff]
pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xc4000000-0xc5ffffff]
pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff]
pci 0000:00:03.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xc4000000-0xc6ffffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xc2000000-0xc2ffffff]
pci 0000:03:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xc0000000-0xc1ffffff]
pci 0000:03:00.0: reg 24 io port: [0x3000-0x307f]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff]
pci 0000:00:07.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:07.0: bridge 32bit mmio: [0xc0000000-0xc2ffffff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:06:00.0: reg 10 io port: [0x2018-0x201f]
pci 0000:06:00.0: reg 14 io port: [0x2024-0x2027]
pci 0000:06:00.0: reg 18 io port: [0x2010-0x2017]
pci 0000:06:00.0: reg 1c io port: [0x2020-0x2023]
pci 0000:06:00.0: reg 20 io port: [0x2000-0x200f]
pci 0000:06:00.0: reg 24 32bit mmio: [0xc7100000-0xc71003ff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xc7100000-0xc71fffff]
pci 0000:07:02.0: reg 10 io port: [0x1000-0x103f]
pci 0000:07:02.0: supports D1 D2
pci 0000:07:02.1: reg 10 io port: [0x1040-0x1047]
pci 0000:07:02.1: supports D1 D2
pci 0000:07:02.2: reg 10 32bit mmio: [0xc7004000-0xc70047ff]
pci 0000:07:02.2: reg 14 32bit mmio: [0xc7000000-0xc7003fff]
pci 0000:07:02.2: supports D1 D2
pci 0000:07:02.2: PME# supported from D0 D1 D2 D3hot
pci 0000:07:02.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xc7000000-0xc70fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
xenbus_probe_backend_init bus registered ok
xenbus_probe_frontend_init bus registered ok
xen_balloon: Initialising balloon driver with page order 0.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
xen: registering gsi 8 triggering 1 polarity 0
xen_allocate_pirq: returning irq 8 for gsi 8
xen: --> irq=8
Already setup the GSI :8
xen: registering gsi 13 triggering 1 polarity 0
xen_allocate_pirq: returning irq 13 for gsi 13
xen: --> irq=13
Already setup the GSI :13
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0x500-0x53f has been reserved
system 00:05: ioport range 0x400-0x47f has been reserved
system 00:05: ioport range 0x680-0x6ff has been reserved
pciback 0000:00:1d.0: seizing device
pciback 0000:03:00.0: seizing device
PM-Timer failed consistency check (0x0xffffff) - aborting.
pci 0000:02:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff]
pciback 0000:03:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: 0x4000-0x4fff
pci 0000:00:03.0: MEM window: 0xc4000000-0xc6ffffff
pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pciback 0000:03:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: IO window: 0x3000-0x3fff
pci 0000:00:07.0: MEM window: 0xc0000000-0xc2ffffff
pci 0000:00:07.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: disabled
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4: IO window: 0x2000-0x2fff
pci 0000:00:1c.4: MEM window: 0xc7100000-0xc71fffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0: IO window: 0x1000-0x1fff
pci 0000:00:1e.0: MEM window: 0xc7000000-0xc70fffff
pci 0000:00:1e.0: PREFETCH window: disabled
xen: registering gsi 16 triggering 0 polarity 1
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
xen: --> irq=16
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: setting latency timer to 64
xen: registering gsi 17 triggering 0 polarity 1
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
xen: --> irq=17
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
xen: registering gsi 17 triggering 0 polarity 1
xen_allocate_pirq: returning irq 17 for gsi 17
xen: --> irq=17
Already setup the GSI :17
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:02: resource 1 mem: [0xc4000000-0xc6ffffff]
pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:03: resource 1 mem: [0xc0000000-0xc2ffffff]
pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:06: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:06: resource 1 mem: [0xc7100000-0xc71fffff]
pci_bus 0000:07: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:07: resource 1 mem: [0xc7000000-0xc70fffff]
pci_bus 0000:07: resource 3 io: [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 12788k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
DMA: software IO TLB at phys 0x20000000 - 0x24000000
Scanning for low memory corruption every 60 seconds
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Slow work thread pool: Starting up
Slow work thread pool: Ready
msgmni has been set to 13389
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
alloc irq_desc for 1504 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 1503 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 1502 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 1501 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 1500 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 1499 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:1c.4: setting latency timer to 64
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
pci-stub: invalid id string ""
input: Sleep Button as /class/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRF]
Event-channel device installed.
pciback 0000:03:00.0: enabling device (0000 -> 0003)
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
pciback 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pciback 0000:03:00.0: PCI INT A disabled
xen: registering gsi 23 triggering 0 polarity 1
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
xen: --> irq=23
pciback 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pciback 0000:00:1d.0: PCI INT A disabled
blktap_device_init: blktap device major 253
blktap_ring_init: blktap ring major: 253
registering netback
alloc irq_desc for 1498 on node 0
alloc kstat_irqs on node 0
hpet_acpi_add: no address or irqs in _CRS
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
xen: --> irq=19
ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 1497 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220100 irq 1497
ata2: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220180 irq 1497
ata3: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220200 irq 1497
ata4: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220280 irq 1497
ata5: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220300 irq 1497
ata6: SATA max UDMA/133 abar m2048@0xc7220000 port 0xc7220380 irq 1497
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
ahci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ
ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:06:00.0: MV_AHCI HACK: port_map 7 -> 3
ahci 0000:06:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
ahci 0000:06:00.0: flags: 64bit stag led slum part
ahci 0000:06:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xc7100000 port 0xc7100100 irq 16
ata8: SATA max UDMA/133 abar m1024@0xc7100000 port 0xc7100180 irq 16
ata9: DUMMY
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
xen: registering gsi 20 triggering 0 polarity 1
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
xen: --> irq=20
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
alloc irq_desc for 1496 on node 0
alloc kstat_irqs on node 0
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:93:43:82
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
usbcore: registered new interface driver cytherm
cytherm: v1.0:Cypress USB Thermometer driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2010-03-23 15:38:12 UTC (1269358692)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HA, max UDMA/133
ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata4.00: ATA-7: WDC WD2500JS-19MHB0, 02.01C03, max UDMA/133
ata4.00: 488397168 sectors, multi 0: LBA48
ata2.00: ATAPI: SAMSUNG DVDWBD SH-B083L, SB00, max UDMA/100, ATAPI AN
ata3.00: ATA-7: ST3250410AS, 3.AAB, max UDMA/133
ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM SAMSUNG DVDWBD SH-B083L SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 102x/102x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 2:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
scsi 3:0:0:0: Direct-Access ATA WDC WD2500JS-19M 02.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 476k freed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen: registering gsi 18 triggering 0 polarity 1
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
xen: --> irq=18
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xc7222000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xen: registering gsi 23 triggering 0 polarity 1
xen_allocate_pirq: returning irq 23 for gsi 23
xen: --> irq=23
Already setup the GSI :23
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc7221000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xen: registering gsi 21 triggering 0 polarity 1
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
xen: --> irq=21
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
xen_allocate_pirq: returning irq 19 for gsi 19
xen: --> irq=19
Already setup the GSI :19
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x000050a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xen: registering gsi 19 triggering 0 polarity 1
xen_allocate_pirq: returning irq 19 for gsi 19
xen: --> irq=19
Already setup the GSI :19
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
EXT4-fs (sda1): mounted filesystem with ordered data mode
usb 1-6: new high speed USB device using ehci_hcd and address 4
pci-stub 0000:03:00.0: claimed by stub
pci-stub 0000:00:1d.0: claimed by stub
udev: starting version 151
usb 1-6: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
usb 2-3: new high speed USB device using ehci_hcd and address 2
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uvcvideo: Found UVC 1.00 device USB Video Camera (0471:2034)
input: USB Video Camera as /class/input/input2
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
gameport: EMU10K1 is pci0000:07:02.1/gameport0, io 0x1040, speed 619kHz
xen: registering gsi 18 triggering 0 polarity 1
xen_allocate_pirq: returning irq 18 for gsi 18
xen: --> irq=18
Already setup the GSI :18
EMU10K1_Audigy 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
usb 2-3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 3 ports detected
usb 6-2: new full speed USB device using uhci_hcd and address 2
Adding 1048568k swap on /.swapfile. Priority:1 extents:40 across:5668856k SS
EXT4-fs (sda2): mounted filesystem without journal
coretemp coretemp.0: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.1: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.2: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.3: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.4: Unable to access MSR 0xEE, for Tjmax, left at default
coretemp coretemp.5: Unable to access MSR 0xEE, for Tjmax, left at default
usb 6-2: configuration #1 chosen from 1 choice
device tap0 entered promiscuous mode
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 3 ports detected
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
generic-usb 0003:046D:C03D.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0
usb 5-1.2: new full speed USB device using uhci_hcd and address 3
usb 5-1.2: configuration #1 chosen from 1 choice
input: Logitech Logitech BT Mini-Receiver as /class/input/input4
generic-usb 0003:046D:C713.0002: input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.2-1.2/input0
usb 5-1.3: new full speed USB device using uhci_hcd and address 4
usb 5-1.3: configuration #1 chosen from 1 choice
ADDRCONF(NETDEV_UP): eth0: link is not ready
device eth0 entered promiscuous mode
input: Logitech Logitech BT Mini-Receiver as /class/input/input5
logitech 0003:046D:C714.0003: input: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.2-1.3/input0
usb 7-1.1: new full speed USB device using uhci_hcd and address 4
usb 7-1.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /class/input/input6
generic-usb 0003:413C:2010.0004: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1/input0
input: Dell Dell USB Keyboard as /class/input/input7
generic-usb 0003:413C:2010.0005: input: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1/input1
scsi 9:0:0:0: Direct-Access USB2.0 CardReader CF RW 0814 PQ: 0 ANSI: 0
sd 9:0:0:0: Attached scsi generic sg4 type 0
usb-storage: device scan complete
sd 9:0:0:0: [sdd] Attached SCSI removable disk
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
br0: port 2(eth0) entering forwarding state
CIFS VFS: rsize 130048 too large, using MaxBufSize
fuse init (API version 7.13)
alloc irq_desc for 1495 on node 0
alloc kstat_irqs on node 0
xenbus_probe wake_waiting
alloc irq_desc for 1494 on node 0
alloc kstat_irqs on node 0
xenbus_probe wake_waiting
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
xenbus_probe_devices backend
xenbus_probe_devices failed xenbus_directory
backend_probe_and_watch devices probed ok
backend_probe_and_watch watch add ok ok
backend_probe_and_watch all done
xenbus_probe_devices device
xenbus_probe_devices failed xenbus_directory
frontend_probe_and_watch devices probed ok
frontend_probe_and_watch watch add ok ok
frontend_probe_and_watch all done
br0: no IPv6 routers present
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
xen: registering gsi 16 triggering 0 polarity 1
xen_allocate_pirq: returning irq 16 for gsi 16
xen: --> irq=16
Already setup the GSI :16
nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096000c1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.94.3c.00
[drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 04000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02022332 00c200a0
[drm] nouveau 0000:02:00.0: Raw DCB entry 4: 0000000e 00000000
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x01000030: type 0x30 idx 0 tag 0xff
[drm] nouveau 0000:02:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[drm] nouveau 0000:02:00.0: 2: 0x00020261: type 0x61 idx 2 tag 0x52
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD101
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD4F2
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE542
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE68B
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xE8F3
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xE958
[drm] nouveau 0000:02:00.0: 0xE958: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: 0xC0CE: parsing output script 0
[drm] nouveau 0000:02:00.0: 0xC0CE: parsing output script 0
[TTM] Zone kernel: Available graphics memory: 4062024 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[drm] nouveau 0000:02:00.0: 512 MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[drm] nouveau 0000:02:00.0: Detected a DAC output
[drm] nouveau 0000:02:00.0: Detected a TMDS output
[drm] nouveau 0000:02:00.0: Detected a DAC output
[drm] nouveau 0000:02:00.0: Detected a TMDS output
[drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[drm] nouveau 0000:02:00.0: Detected a VGA connector
[drm] nouveau 0000:02:00.0: Detected a HDMI connector
[drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff8801ee51f200
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:02:00.0 to PCI:0000:03:00.0
eth0: no IPv6 routers present
[drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
[drm] TMDS-8: set mode 1280x1024 29
[drm] TMDS-10: set mode 1280x1024 2b
[drm] nouveau 0000:02:00.0: 0xC0EC: parsing output script 1
[drm] nouveau 0000:02:00.0: 0xC0FA: parsing output script 2
[drm] nouveau 0000:02:00.0: 0xC058: parsing clock script 0
[drm] nouveau 0000:02:00.0: 0xB6E2: parsing clock script 1
[drm] nouveau 0000:02:00.0: 0xC0EC: parsing output script 1
[drm] nouveau 0000:02:00.0: 0xC0FA: parsing output script 2
[drm] nouveau 0000:02:00.0: 0xBF9E: parsing clock script 0
[drm] nouveau 0000:02:00.0: 0xB6E2: parsing clock script 1
alloc irq_desc for 1493 on node 0
alloc kstat_irqs on node 0
device vif1.0 entered promiscuous mode
br0: port 3(vif1.0) entering forwarding state
device tap1.0 entered promiscuous mode
br0: port 4(tap1.0) entering forwarding state
alloc irq_desc for 1492 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1491 on node 0
alloc kstat_irqs on node 0
BUG: scheduling while atomic: xenwatch/33/0x00000002
Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29
Call Trace:
[<ffffffff8103d140>] ? __schedule_bug+0x40/0x60
[<ffffffff8143e73d>] ? thread_return+0x291/0x714
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff8100f342>] ? check_events+0x12/0x20
[<ffffffff8121823d>] ? read_reply+0xad/0x150
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff812184ab>] ? xs_talkv+0xdb/0x1e0
[<ffffffff81218702>] ? xs_single+0x42/0x60
[<ffffffff81218d6f>] ? xenbus_read+0x3f/0x70
[<ffffffff81218e4f>] ? xenbus_gather+0xaf/0x180
[<ffffffff811b50fe>] ? vsscanf+0x32e/0x8d0
[<ffffffff81216f26>] ? xenbus_read_driver_state+0x26/0x40
[<ffffffff8121eb56>] ? pciback_setup_backend+0x66/0x330
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff810b853c>] ? kfree+0x8c/0xd0
[<ffffffff81218e83>] ? xenbus_gather+0xe3/0x180
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff81440b40>] ? _spin_unlock_irqrestore+0x10/0x40
[<ffffffff8121f44a>] ? pciback_xenbus_probe+0x10a/0x110
[<ffffffff81219d4c>] ? xenbus_dev_probe+0x7c/0x150
[<ffffffff81254313>] ? driver_probe_device+0x93/0x190
[<ffffffff812544b0>] ? __device_attach+0x0/0x60
[<ffffffff812534ac>] ? bus_for_each_drv+0x5c/0x90
[<ffffffff812545cc>] ? device_attach+0x8c/0xa0
[<ffffffff81253295>] ? bus_probe_device+0x25/0x40
[<ffffffff81251cce>] ? device_add+0x53e/0x6d0
[<ffffffff8121a114>] ? xenbus_probe_node+0x144/0x1f0
[<ffffffff8121a381>] ? xenbus_dev_changed+0x1c1/0x1d0
[<ffffffff812180bc>] ? xenwatch_thread+0x9c/0x170
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff81218020>] ? xenwatch_thread+0x0/0x170
[<ffffffff8105dade>] ? kthread+0x8e/0xa0
[<ffffffff8101303a>] ? child_rip+0xa/0x20
[<ffffffff810121e6>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff810129a1>] ? retint_restore_args+0x5/0x6
[<ffffffff81013030>] ? child_rip+0x0/0x20
BUG: scheduling while atomic: xenwatch/33/0x00000002
Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29
Call Trace:
[<ffffffff8103d140>] ? __schedule_bug+0x40/0x60
[<ffffffff8143e73d>] ? thread_return+0x291/0x714
[<ffffffff8100ea59>] ? xen_force_evtchn_callback+0x9/0x10
[<ffffffff8100f342>] ? check_events+0x12/0x20
[<ffffffff8100f342>] ? check_events+0x12/0x20
[<ffffffff8121823d>] ? read_reply+0xad/0x150
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff812184ab>] ? xs_talkv+0xdb/0x1e0
[<ffffffff81218702>] ? xs_single+0x42/0x60
[<ffffffff81218d6f>] ? xenbus_read+0x3f/0x70
[<ffffffff81218f3a>] ? xenbus_scanf+0x1a/0x70
[<ffffffff8121ebe4>] ? pciback_setup_backend+0xf4/0x330
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff810b853c>] ? kfree+0x8c/0xd0
[<ffffffff81218e83>] ? xenbus_gather+0xe3/0x180
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff81440b40>] ? _spin_unlock_irqrestore+0x10/0x40
[<ffffffff8121f44a>] ? pciback_xenbus_probe+0x10a/0x110
[<ffffffff81219d4c>] ? xenbus_dev_probe+0x7c/0x150
[<ffffffff81254313>] ? driver_probe_device+0x93/0x190
[<ffffffff812544b0>] ? __device_attach+0x0/0x60
[<ffffffff812534ac>] ? bus_for_each_drv+0x5c/0x90
[<ffffffff812545cc>] ? device_attach+0x8c/0xa0
[<ffffffff81253295>] ? bus_probe_device+0x25/0x40
[<ffffffff81251cce>] ? device_add+0x53e/0x6d0
[<ffffffff8121a114>] ? xenbus_probe_node+0x144/0x1f0
[<ffffffff8121a381>] ? xenbus_dev_changed+0x1c1/0x1d0
[<ffffffff812180bc>] ? xenwatch_thread+0x9c/0x170
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff81218020>] ? xenwatch_thread+0x0/0x170
[<ffffffff8105dade>] ? kthread+0x8e/0xa0
[<ffffffff8101303a>] ? child_rip+0xa/0x20
[<ffffffff810121e6>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff810129a1>] ? retint_restore_args+0x5/0x6
[<ffffffff81013030>] ? child_rip+0x0/0x20
BUG: scheduling while atomic: xenwatch/33/0x00000002
Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29
Call Trace:
[<ffffffff8103d140>] ? __schedule_bug+0x40/0x60
[<ffffffff8143e73d>] ? thread_return+0x291/0x714
[<ffffffff8100ea59>] ? xen_force_evtchn_callback+0x9/0x10
[<ffffffff8100f342>] ? check_events+0x12/0x20
[<ffffffff8121823d>] ? read_reply+0xad/0x150
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff812184ab>] ? xs_talkv+0xdb/0x1e0
[<ffffffff81218702>] ? xs_single+0x42/0x60
[<ffffffff81218d6f>] ? xenbus_read+0x3f/0x70
[<ffffffff81218f3a>] ? xenbus_scanf+0x1a/0x70
[<ffffffff811b6bf6>] ? snprintf+0x36/0x40
[<ffffffff8121ed1d>] ? pciback_setup_backend+0x22d/0x330
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff810b853c>] ? kfree+0x8c/0xd0
[<ffffffff81218e83>] ? xenbus_gather+0xe3/0x180
[<ffffffff81440b40>] ? _spin_unlock_irqrestore+0x10/0x40
[<ffffffff8121f44a>] ? pciback_xenbus_probe+0x10a/0x110
[<ffffffff81219d4c>] ? xenbus_dev_probe+0x7c/0x150
[<ffffffff81254313>] ? driver_probe_device+0x93/0x190
[<ffffffff812544b0>] ? __device_attach+0x0/0x60
[<ffffffff812534ac>] ? bus_for_each_drv+0x5c/0x90
[<ffffffff812545cc>] ? device_attach+0x8c/0xa0
[<ffffffff81253295>] ? bus_probe_device+0x25/0x40
[<ffffffff81251cce>] ? device_add+0x53e/0x6d0
[<ffffffff8121a114>] ? xenbus_probe_node+0x144/0x1f0
[<ffffffff8121a381>] ? xenbus_dev_changed+0x1c1/0x1d0
[<ffffffff812180bc>] ? xenwatch_thread+0x9c/0x170
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff81218020>] ? xenwatch_thread+0x0/0x170
[<ffffffff8105dade>] ? kthread+0x8e/0xa0
[<ffffffff8101303a>] ? child_rip+0xa/0x20
[<ffffffff810121e6>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff810129a1>] ? retint_restore_args+0x5/0x6
[<ffffffff81013030>] ? child_rip+0x0/0x20
pciback pci-1-0: 22 Couldn't locate PCI device (0000:03:00.0)! perhaps already in-use?
BUG: scheduling while atomic: xenwatch/33/0x00000002
Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29
Call Trace:
[<ffffffff8103d140>] ? __schedule_bug+0x40/0x60
[<ffffffff8143e73d>] ? thread_return+0x291/0x714
[<ffffffff8100f342>] ? check_events+0x12/0x20
[<ffffffff8121823d>] ? read_reply+0xad/0x150
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff812184ab>] ? xs_talkv+0xdb/0x1e0
[<ffffffff81218cfb>] ? xenbus_write+0x6b/0xa0
[<ffffffff81217029>] ? xenbus_va_dev_error+0xe9/0x160
[<ffffffff8121732a>] ? xenbus_dev_fatal+0x3a/0x50
[<ffffffff8121d582>] ? pcistub_get_pci_dev_by_slot+0xa2/0xd0
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff8121eae9>] ? pciback_export_device+0x119/0x120
[<ffffffff8121ec6d>] ? pciback_setup_backend+0x17d/0x330
[<ffffffff81218e83>] ? xenbus_gather+0xe3/0x180
[<ffffffff81440b40>] ? _spin_unlock_irqrestore+0x10/0x40
[<ffffffff8121f44a>] ? pciback_xenbus_probe+0x10a/0x110
[<ffffffff81219d4c>] ? xenbus_dev_probe+0x7c/0x150
[<ffffffff81254313>] ? driver_probe_device+0x93/0x190
[<ffffffff812544b0>] ? __device_attach+0x0/0x60
[<ffffffff812534ac>] ? bus_for_each_drv+0x5c/0x90
[<ffffffff812545cc>] ? device_attach+0x8c/0xa0
[<ffffffff81253295>] ? bus_probe_device+0x25/0x40
[<ffffffff81251cce>] ? device_add+0x53e/0x6d0
[<ffffffff8121a114>] ? xenbus_probe_node+0x144/0x1f0
[<ffffffff8121a381>] ? xenbus_dev_changed+0x1c1/0x1d0
[<ffffffff812180bc>] ? xenwatch_thread+0x9c/0x170
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff81218020>] ? xenwatch_thread+0x0/0x170
[<ffffffff8105dade>] ? kthread+0x8e/0xa0
[<ffffffff8101303a>] ? child_rip+0xa/0x20
[<ffffffff810121e6>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff810129a1>] ? retint_restore_args+0x5/0x6
[<ffffffff81013030>] ? child_rip+0x0/0x20
BUG: scheduling while atomic: xenwatch/33/0x00000002
Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29
Call Trace:
[<ffffffff8103d140>] ? __schedule_bug+0x40/0x60
[<ffffffff8143e73d>] ? thread_return+0x291/0x714
[<ffffffff8100f342>] ? check_events+0x12/0x20
[<ffffffff8121823d>] ? read_reply+0xad/0x150
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff812184ab>] ? xs_talkv+0xdb/0x1e0
[<ffffffff81218702>] ? xs_single+0x42/0x60
[<ffffffff81218d6f>] ? xenbus_read+0x3f/0x70
[<ffffffff81218f3a>] ? xenbus_scanf+0x1a/0x70
[<ffffffff8100ea59>] ? xen_force_evtchn_callback+0x9/0x10
[<ffffffff8100f342>] ? check_events+0x12/0x20
[<ffffffff81217280>] ? xenbus_switch_state+0x40/0xb0
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff810b853c>] ? kfree+0x8c/0xd0
[<ffffffff81217337>] ? xenbus_dev_fatal+0x47/0x50
[<ffffffff8121d582>] ? pcistub_get_pci_dev_by_slot+0xa2/0xd0
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff8121eae9>] ? pciback_export_device+0x119/0x120
[<ffffffff8121ec6d>] ? pciback_setup_backend+0x17d/0x330
[<ffffffff81218e83>] ? xenbus_gather+0xe3/0x180
[<ffffffff81440b40>] ? _spin_unlock_irqrestore+0x10/0x40
[<ffffffff8121f44a>] ? pciback_xenbus_probe+0x10a/0x110
[<ffffffff81219d4c>] ? xenbus_dev_probe+0x7c/0x150
[<ffffffff81254313>] ? driver_probe_device+0x93/0x190
[<ffffffff812544b0>] ? __device_attach+0x0/0x60
[<ffffffff812534ac>] ? bus_for_each_drv+0x5c/0x90
[<ffffffff812545cc>] ? device_attach+0x8c/0xa0
[<ffffffff81253295>] ? bus_probe_device+0x25/0x40
[<ffffffff81251cce>] ? device_add+0x53e/0x6d0
[<ffffffff8121a114>] ? xenbus_probe_node+0x144/0x1f0
[<ffffffff8121a381>] ? xenbus_dev_changed+0x1c1/0x1d0
[<ffffffff812180bc>] ? xenwatch_thread+0x9c/0x170
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff81218020>] ? xenwatch_thread+0x0/0x170
[<ffffffff8105dade>] ? kthread+0x8e/0xa0
[<ffffffff8101303a>] ? child_rip+0xa/0x20
[<ffffffff810121e6>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff810129a1>] ? retint_restore_args+0x5/0x6
[<ffffffff81013030>] ? child_rip+0x0/0x20
BUG: scheduling while atomic: xenwatch/33/0x00000002
Modules linked in: nouveau ttm drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight fb intel_agp agpgart sco bnep l2cap bluetooth fuse coretemp hwmon usb_storage snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_ac97_codec emu10k1_gp ac97_bus gameport uvcvideo serio_raw snd_util_mem i2c_i801 snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd videodev v4l1_compat v4l2_compat_ioctl32 soundcore i2c_core uhci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 33, comm: xenwatch Not tainted 2.6.32.10 #29
Call Trace:
[<ffffffff8103d140>] ? __schedule_bug+0x40/0x60
[<ffffffff8143e73d>] ? thread_return+0x291/0x714
[<ffffffff8100f342>] ? check_events+0x12/0x20
[<ffffffff8121823d>] ? read_reply+0xad/0x150
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff812184ab>] ? xs_talkv+0xdb/0x1e0
[<ffffffff8100ea59>] ? xen_force_evtchn_callback+0x9/0x10
[<ffffffff81218cfb>] ? xenbus_write+0x6b/0xa0
[<ffffffff81219456>] ? xenbus_printf+0xa6/0xf0
[<ffffffff81218f78>] ? xenbus_scanf+0x58/0x70
[<ffffffff8100ea59>] ? xen_force_evtchn_callback+0x9/0x10
[<ffffffff812172be>] ? xenbus_switch_state+0x7e/0xb0
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff81217337>] ? xenbus_dev_fatal+0x47/0x50
[<ffffffff8121d582>] ? pcistub_get_pci_dev_by_slot+0xa2/0xd0
[<ffffffff8100f32f>] ? xen_restore_fl_direct_end+0x0/0x1
[<ffffffff8121eae9>] ? pciback_export_device+0x119/0x120
[<ffffffff8121ec6d>] ? pciback_setup_backend+0x17d/0x330
[<ffffffff81218e83>] ? xenbus_gather+0xe3/0x180
[<ffffffff81440b40>] ? _spin_unlock_irqrestore+0x10/0x40
[<ffffffff8121f44a>] ? pciback_xenbus_probe+0x10a/0x110
[<ffffffff81219d4c>] ? xenbus_dev_probe+0x7c/0x150
[<ffffffff81254313>] ? driver_probe_device+0x93/0x190
[<ffffffff812544b0>] ? __device_attach+0x0/0x60
[<ffffffff812534ac>] ? bus_for_each_drv+0x5c/0x90
[<ffffffff812545cc>] ? device_attach+0x8c/0xa0
[<ffffffff81253295>] ? bus_probe_device+0x25/0x40
[<ffffffff81251cce>] ? device_add+0x53e/0x6d0
[<ffffffff8121a114>] ? xenbus_probe_node+0x144/0x1f0
[<ffffffff8121a381>] ? xenbus_dev_changed+0x1c1/0x1d0
[<ffffffff812180bc>] ? xenwatch_thread+0x9c/0x170
[<ffffffff8105ddc0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff81218020>] ? xenwatch_thread+0x0/0x170
[<ffffffff8105dade>] ? kthread+0x8e/0xa0
[<ffffffff8101303a>] ? child_rip+0xa/0x20
[<ffffffff810121e6>] ? int_ret_from_sys_call+0x7/0x1b
[<ffffffff810129a1>] ? retint_restore_args+0x5/0x6
[<ffffffff81013030>] ? child_rip+0x0/0x20
vif1.0: no IPv6 routers present
tap1.0: no IPv6 routers present
br0: port 4(tap1.0) entering disabled state
device tap1.0 left promiscuous mode
br0: port 4(tap1.0) entering disabled state
blkback: ring-ref 16383, event-channel 7, protocol 1 (unspecified, assuming native)
alloc irq_desc for 1490 on node 0
alloc kstat_irqs on node 0
blkback: ring-ref 16370, event-channel 8, protocol 1 (unspecified, assuming native)
alloc irq_desc for 1489 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 1488 on node 0
alloc kstat_irqs on node 0
CIFS VFS: server 10.18.11.5 of type Samba 3.2.5 returned unexpected error on SMB posix open, disabling posix open support. Check if server update available.
hrtimer: interrupt took 2910319 ns