;; Static extension configuration file, used by; the pbx_config module. This is where you configure all your ; inbound and outbound calls in Asterisk. ; ;; The "General" category is for certain variables. ;[general];; If static is set to no, or omitted, then the pbx_config will rewrite; this file when extensions are modified. Remember that all comments; made in the file will be lost when that happens. ;; XXX Not yet implemented XXX;static=yes;; if static=yes and writeprotect=no, you can save dialplan by; CLI command 'save dialplan' too;writeprotect=no; You can include other config files, use the #include command (without the ';'); Note that this is different from the "include" command that includes contexts within ; other contexts. The #include command works in all asterisk configuration files.;#include "filename.conf"; The "Globals" category contains global variables that can be referenced; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental variable; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid;[globals]CONSOLE=Console/dsp ; Console interface for demo;CONSOLE=Zap/1;CONSOLE=Phone/phone0IAXINFO=guest ; IAXtel username/password;IAXINFO=myuser:mypassTRUNK=Zap/g2 ; Trunk interfaceTRUNKMSD=1 ; MSD digits to strip (usually 1 or 0);TRUNK=IAX2/user:pass@provider;; Any category other than "General" and "Globals" represent ; extension contexts, which are collections of extensions. ;; Extension names may be numbers, letters, or combinations; thereof. If an extension name is prefixed by a '_'; character, it is interpreted as a pattern rather than a; literal. In patterns, some characters have special meanings:;; X - any digit from 0-9; Z - any digit from 1-9; N - any digit from 2-9; [1235-9] - any digit in the brackets (in this example, 1,2,3,5,6,7,8,9); . - wildcard, matches anything remaining (e.g. _9011. matches ; anything starting with 9011 excluding 9011 itself);; For example the extension _NXXXXXX would match normal 7 digit dialings, ; while _1NXXNXXXXXX would represent an area code plus phone number; preceeded by a one.;; Each step of an extension is ordered by priority, which must; always start with 1 to be considered a valid extension.;; Contexts contain several lines, one for each step of each; extension, which can take one of two forms as listed below,; with the first form being preferred. One may include another; context in the current one as well, optionally with a; date and time. Included contexts are included in the order; they are listed.;;[context];exten => someexten,priority,application(arg1,arg2,...);exten => someexten,priority,application,arg1|arg2...;; Timing list for includes is ;; <time range>|<days of week>|<days of month>|<months>;;include => daytime|9:00-17:00|mon-fri|*|*;; ignorepat can be used to instruct drivers to not cancel dialtone upon; receipt of a particular pattern. The most commonly used example is; of course '9' like this:;;ignorepat => 9;; so that dialtone remains even after dialing a 9.;;; Here are the entries you need to participate in the IAXTEL; call routing system. Most IAXTEL numbers begin with 1-700, but; there are exceptions. For more information, and to sign; up, please go to www.gnophone.com or www.iaxtel.com;[iaxtel700]exten => _91700XXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel);; The SWITCH statement permits a server to share the dialplain with; another server. Use with care: Reciprocal switch statements are not; allowed (e.g. both A -> B and B -> A), and the switched server needs; to be on-line or else dialing can be severly delayed.;[iaxprovider];switch => IAX2/user:[key]@myserver/mycontext[trunkint];; International long distance through trunk;exten => _9011.,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _9011.,2,Congestion[trunkld];; Long distance context accessed through trunk;exten => _91NXXNXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _91NXXNXXXXXX,2,Congestion[trunklocal];; Local seven-digit dialing accessed through trunk interface;exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _9NXXXXXX,2,Congestion[trunktollfree];; Long distance context accessed through trunk interface;exten => _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _91800NXXXXXX,2,Congestionexten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _91888NXXXXXX,2,Congestionexten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _91877NXXXXXX,2,Congestionexten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _91866NXXXXXX,2,Congestion[international];; Master context for international long distance;ignorepat => 9include => longdistanceinclude => trunkint[longdistance];; Master context for long distance;ignorepat => 9include => localinclude => trunkld[local];; Master context for local, toll-free, and iaxtel calls only;ignorepat => 9include => defaultinclude => parkedcallsinclude => trunklocalinclude => iaxtel700include => trunktollfreeinclude => iaxprovider;; You can use an alternative switch type as well, to resolve; extensions that are not known here, for example with remote ; IAX switching you transparently get access to the remote; Asterisk PBX; ; switch => IAX2/user:password@bigserver/local[macro-stdexten];;; Standard extension macro:; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well; ${ARG2} - Device(s) to ring;exten => s,1,Dial(${ARG2},20) ; Ring the interface, 20 seconds maximumexten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)exten => s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable, send to voicemail w/ unavail announceexten => s-NOANSWER,2,Goto(default,s,1) ; If they press #, return to startexten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announceexten => s-BUSY,2,Goto(default,s,1) ; If they press #, return to startexten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answerexten => a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain[demo];; We start with what to do when a call first comes in.;exten => s,1,Wait,1 ; Wait a second, just for funexten => s,2,Answer ; Answer the lineexten => s,3,DigitTimeout,5 ; Set Digit Timeout to 5 secondsexten => s,4,ResponseTimeout,10 ; Set Response Timeout to 10 secondsexten => s,5,BackGround(demo-congrats) ; Play a congratulatory messageexten => s,6,BackGround(demo-instruct) ; Play some instructionsexten => 2,1,BackGround(demo-moreinfo) ; Give some more information.exten => 2,2,Goto(s,6)exten => 3,1,SetLanguage(fr) ; Set language to frenchexten => 3,2,Goto(s,5) ; Start with the congratulationsexten => 1000,1,Goto(default,s,1);; We also create an example user, 1234, who is on the console and has; voicemail, etc.;exten => 1234,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 1234,2,Macro(stdexten,1234,${CONSOLE})exten => 1235,1,Voicemail(u1234) ; Right to voicemailexten => 1236,1,Dial(Console/dsp) ; Ring foreverexten => 1236,2,Voicemail(u1234) ; Unless busy;; # for when they're done with the demo;exten => #,1,Playback(demo-thanks) ; "Thanks for trying the demo"exten => #,2,Hangup ; Hang them up.;; A timeout and "invalid extension rule";exten => t,1,Goto(#,1) ; If they take too long, give upexten => i,1,Playback(invalid) ; "That's not valid, try again";; Create an extension, 500, for dialing the; Asterisk demo.;exten => 500,1,Playback(demo-abouttotry); Let them know what's going onexten => 500,2,Dial(IAX2/guest@misery.digium.com/s@default) ; Call the Asterisk demoexten => 500,3,Playback(demo-nogo) ; Couldn't connect to the demo siteexten => 500,4,Goto(s,6) ; Return to the start over message.;; Create an extension, 600, for evaulating echo latency.;exten => 600,1,Playback(demo-echotest) ; Let them know what's going onexten => 600,2,Echo ; Do the echo testexten => 600,3,Playback(demo-echodone) ; Let them know it's overexten => 600,4,Goto(s,6) ; Start over;; Give voicemail at extension 8500;exten => 8500,1,VoicemailMainexten => 8500,2,Goto(s,6);; Here's what a phone entry would look like (IXJ for example);;exten => 1265,1,Dial(Phone/phone0,15);exten => 1265,2,Goto(s,5);[mainmenu];; Example "main menu" context with submenu;;exten => s,1,Answer;exten => s,2,Background(thanks) ; "Thanks for calling press 1 for sales, 2 for support, ...";exten => 1,1,Goto(submenu,s,1);exten => 2,1,Hangup;include => default;;[submenu];exten => s,1,Ringing ; Make them comfortable with 2 seconds of ringback;exten => s,2,Wait,2;exten => s,3,Background(submenuopts) ; "Thanks for calling the sales department. Press 1 for steve, 2 for...";exten => 1,1,Goto(default,steve,1);exten => 2,1,Goto(default,mark,2)[default];; By default we include the demo. In a production system, you ; probably don't want to have the demo there.;include => capiin;; Extensions like the two below can be used for FWD, Nikotel, sipgate etc.; Note that you must have a [sipprovider] section in sip.conf whereas; the otherprovider.net example does not require such a peer definition;;exten => _41X.,1,Dial(SIP/${EXTEN:2}@sipprovider,,r);exten => _42X.,1,Dial(SIP/user:passwd@${EXTEN:2}@otherprovider.net,30,rT); Real extensions would go here. Generally you want real extensions to be 4 or 5; digits long (although there is no such requirement) and start with a single; digit that is fairly large (like 6 or 7) so that you have plenty of room to; overlap extensions and menu options without conflict. You can alias them with; names, too and use global variables;exten => 6245,hint,SIP/Grandstream1&SIP/Xlite1 ; Channel hints for presence;exten => 6245,1,Dial(SIP/Grandstream1,20,rt) ; permit transfer;exten => 6245,1,Dial(${HINT},20,rtT) ; Use hint as listed;exten => 6361,1,Dial(IAX2/JaneDoe,,rm) ; ring without time limit;exten => 6389,1,Dial(MGCP/aaln/1@192.168.0.14);exten => 6394,1,Dial(Local/6275/n) ; this will dial ${MARK};exten => 6275,1,Macro(stdexten,6275,${MARK}) ; assuming ${MARK} is something like Zap/2;exten => mark,1,Goto(6275|1) ; alias mark to 6275;exten => 6536,1,Macro(stdexten,6236,${WIL}) ; Ditto for wil;exten => wil,1,Goto(6236|1);; Some other handy things are an extension for checking voicemail via; voicemailmain;;exten => 8500,1,VoicemailMain;exten => 8500,2,Hangup;; Or a conference room (you'll need to edit meetme.conf to enable this room);;exten => 8600,1,Meetme(1234);; Or playing an announcement to the called party, as soon it answers;;exten = 8700,1,Dial(${MARK},30,A(/path/to/my/announcemsg));; For more information on applications, just type "show applications" at your; friendly Asterisk CLI prompt.;; 'show application <command>' will show details of how you; use that particular application in this file, the dial plan. ;[capiin]exten => nummeraufderasteriskhorcht/diebösehandynummer,1,Wait,1exten => asterisk/handy,2,AGI,callback.agiexten => asterisk/handy,3,Hangup[capidialtone]exten => s,1,Dial,CAPI/@asterisk_nummer_aber_ka_genau_ob_das_dieselbe_sein_soll_wo_er_horcht:bexten => s,2,Hangupinclude => capiin;fuck echt FUNKTIONIERE