SiSoftware Sandra
Mainboard
MP Support : 2 Processor(s)
MPS Version : 1.40
Model : NF-CK804
Serial Number : WYKI53601233
System BIOS : 08/05/2005-NF-CK804-6A61FFKBC-00
Chipset : nVidia nForce4 ICP
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 4
Maximum Installable Memory : 16GB
Bank0/1 - A0 : DIMM 512MB/64
Bank2/3 - A1 : DIMM 512MB/64
Bank4/5 - A2 : Empty
Bank6/7 - A3 : Empty
Chipset 1
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
Bus(es) : ISA PCI PCIe USB i2c/SMBus
Version : 1.02
Front Side Bus Speed : 2x 804MHz (1608MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 1000MHz / 2x 200MHz
In/Out Width : 16-bit / 16-bit
SMP - MP Capability : No
IO Queue Depth : 8 request(s)
Chipset 1 Hub Interface
Type : HyperTransport
Version : 1.02
In/Out Width : 16-bit / 16-bit
Speed : 2x 804MHz (1608MHz data rate)
Logical/Chipset 1 Memory Banks
Bank 0 : 512MB DDR-SDRAM 3.0-4-3-8 2CMD
Bank 1 : 512MB DDR-SDRAM 3.0-4-3-8 2CMD
Channels : 1
Bank Interleave : 2-way
Speed : 2x 200MHz (400MHz data rate)
Multiplier : 1/9x
Width : 128-bit
Refresh Rate : 5.00μs
Power Save Mode : No
Fixed Hole Present : No
Memory Module 1
Manufacturer : Micron
Model : 16VDDT6464AG-40BGB
Serial Number : 56DD21AE
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 3.0-3-3-8
Version : 1.1
Date of Manufacture : 14 January 2006
Set Timing @ 200MHz : 3.0-3-3-8
Set Timing @ 167MHz : 2.5-3-3-7
Set Timing @ 133MHz : 2.0-2-2-5
Memory Module 2
Manufacturer : Micron
Model : 16VDDT6464AG-40BGB
Serial Number : 56DD21A7
Type : 512MB DDR-SDRAM
Technology : 16x(32Mx8)
Speed : PC3200U 3.0-3-3-8
Version : 1.1
Date of Manufacture : 14 January 2006
Set Timing @ 200MHz : 3.0-3-3-8
Set Timing @ 167MHz : 2.5-3-3-7
Set Timing @ 133MHz : 2.0-2-2-5
Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No
Voltage Sensor(s)
-12V Voltage : -16.97V
-5V Voltage : -8.78V
PCI Bus(es) on Hub 1
Version : 2.30
Number of Bridges : 5
PCI Bus 0 : PCI (1/1x PCIClk)
PCI Bus 1 : PCI (1/1x PCIClk)
PCI Bus 2 : PCIe (3/1x PCIClk)
PCI Bus 3 : PCIe (3/1x PCIClk)
PCI Bus 4 : PCIe (3/1x PCIClk)
PCI Bus 5 : PCIe (3/1x PCIClk)
LPC Hub Controller 1
Model : Foxconn International Inc nForce4 PCI to ISA Bridge
LPC Hub Controller 2
Model : Foxconn International Inc nForce4 SMBus
USB Controller 1
Model : Foxconn International Inc nForce4 USB Controller
Version : 1.00
Interface : OHCI
Channels : 10
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : Foxconn International Inc nForce4 USB 2.0 Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 10
Companion Controllers : 1
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : nVidia MCP2+ B0 SMBus
Version : 0A.02
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
System SMBus Controller 2
Model : nVidia MCP2+ B1 SMBus
Version : 0A.02
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (Foxconn International Inc nForce4 PCI to ISA Bridge)
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Used (Foxconn International Inc nForce4 USB Controller)
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Used
PCI3 (4h) : PCI 32-bit +5V PME Full-Length Used (Foxconn International Inc nForce4 AC'97 Audio Controller)
PCI4 (5h) : PCI 32-bit +5V PME Full-Length Available
Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - PS/2 / PS/2
PS/2 Mouse : Mouse - PS/2 / PS/2
USB0 : USB - None / None
Performance Tips
Tip 2532 : Consider adding more CPUs for better utilisation.
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Warning 2540 : No APIC detected for MP system.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.