[0x90300000-0x903fffff]
pci_bus 0000:01: resource 2 pref mem [0x80000000-0x87ffffff]
pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0x90200000-0x902fffff]
pci_bus 0000:02: resource 2 pref mem [0x90500000-0x905fffff]
pci_bus 0000:03: resource 1 mem: [0x90100000-0x901fffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem: [0x8c100000-0x900fffff]
pci_bus 0000:04: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:0c: resource 1 mem: [0x8c000000-0x8c0fffff]
pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 9826k freed
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFS: nTxBlock = 8192, nTxLock = 65536
msgmni has been set to 3988
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
vesafb: framebuffer at 0x80000000, mapped to 0xffffc20004700000, using 6144k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 89844 bytes
bootsplash: ...found (1024x768, 48219 bytes, v3).
Console: switching to colour frame buffer device 123x43
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPB]
ACPI: SSDT 000000007feb8c10 002AE (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
ACPI: SSDT 000000007feb8910 002A0 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 000000007feb8f10 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
ACPI: SSDT 000000007feb7f10 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
brd: module loaded
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input4
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
sky2 driver version 1.22
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC chip revision 2
sky2 0000:02:00.0: irq 28 for MSI/MSI-X
sky2 eth0: addr 00:17:f2:d6:34:27
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:03:00.0: setting latency timer to 64
ata1.00: ATAPI: HL-DT-ST DVDRW GWA4080MA, AE39, max UDMA/33
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xffffc200051c0000, irq=17
ohci1394 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata1.00: failed to set xfermode (err_mask=0x100)
ACPI: Battery Slot [BAT0] (battery present)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[8c004000-8c0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90405400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver isight_firmware
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
applesmc: Apple MacBook Pro detected:
applesmc: - Model with accelerometer
applesmc: - Model with light sensors and backlight
applesmc: - Model with 12 temperature sensors
applesmc: device has already been initialized (0xe0, 0x00).
applesmc: device successfully initialized.
applesmc: 2 fans found.
input: applesmc as /class/input/input5
Registered led device: smc::kbd_backlight
applesmc: driver successfully loaded.
Bluetooth: Virtual HCI driver ver 1.2
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.20.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: STAC922x, Apple subsys_id=106b1e00
input: HDA Intel Line In at Ext Rear Jack as /class/input/input6
input: HDA Intel HP Out at Ext Rear Jack as /class/input/input7
ALSA device list:
#0: HDA Intel at 0x90400000 irq 22
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
rtc_cmos 00:08: setting system clock to 2009-09-06 06:13:04 UTC (1252217584)
Clocksource tsc unstable (delta = -85957006 ns)
ata3.01: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max UDMA/133
ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: configured for UDMA/133
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: firmware: requesting isight.fw
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe74bbb4]
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW GWA4080MA AE39 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:1:0: Direct-Access ATA WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5
sd 2:0:1:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 388k freed
Unable to load isight firmware
usb 2-2: new full speed USB device using uhci_hcd and address 2
sky2 eth0: enabling interface
usb 2-2: configuration #1 chosen from 1 choice
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input8
apple 0003:05AC:021B.0001: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
appletouch: Geyser mode initialized.
input: appletouch as /class/input/input9
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input10
apple 0003:05AC:021B.0002: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
generic-usb 0003:05AC:8240.0003: claimed by neither input, hiddev nor hidraw
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: HID 05ac:1000 as /class/input/input11
generic-usb 0003:05AC:1000.0004: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
input: HID 05ac:1000 as /class/input/input12
generic-usb 0003:05AC:1000.0005: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
SQUASHFS error: Can't find a SQUASHFS superblock on sda1
hfs: unable to find HFS+ superblock
SQUASHFS error: Can't find a SQUASHFS superblock on sda2
hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
SQUASHFS error: Can't find a SQUASHFS superblock on sda1
hfs: unable to find HFS+ superblock
SQUASHFS error: Can't find a SQUASHFS superblock on sda2
hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
[drm] Num pipes: 1
mtrr: MTRR 3 not used
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
ioctl32(aterm:2389): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606ae) on /dev/pts/0
ioctl32(aterm:2389): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606b3) on /dev/pts/0
ioctl32(aterm:2389): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606ba) on /dev/pts/0
[drm] Num pipes: 1
mtrr: MTRR 3 not used
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
[drm] Num pipes: 1
mtrr: MTRR 3 not used
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
[drm] Num pipes: 1
mtrr: MTRR 3 not used
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
[drm] Num pipes: 1
mtrr: MTRR 3 not used
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
[drm] Num pipes: 1
mtrr: MTRR 3 not used