rendered paste body/proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory Controller Hub]
(rev 3).
Bus 0, device 1, function 0:
VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset Graphics C
ontroller] (rev 3).
IRQ 11.
Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
Non-prefetchable 32 bit memory at 0xffe80000 [0xffefffff].
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 2).
Master Capable. No bursts. Min Gnt=7.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 2).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82801AA IDE (rev 2).
I/O at 0xffa0 [0xffaf].
Bus 0, device 31, function 2:
USB Controller: Intel Corp. 82801AA USB (rev 2).
IRQ 5.
I/O at 0xe880 [0xe89f].
Bus 0, device 31, function 3:
SMBus: Intel Corp. 82801AA SMBus (rev 2).
IRQ 9.
I/O at 0xec00 [0xec0f].
Bus 1, device 2, function 0:
Unknown mass storage controller: Promise Technology, Inc. 20269 (rev 2).
IRQ 10.
Master Capable. Latency=64. Min Gnt=4.Max Lat=18.
I/O at 0xdc00 [0xdc07].
I/O at 0xd880 [0xd883].
I/O at 0xd800 [0xd807].
I/O at 0xd480 [0xd483].
I/O at 0xd400 [0xd40f].
Non-prefetchable 32 bit memory at 0xffcfc000 [0xffcfffff].
Bus 1, device 3, function 0:
Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model N
C100 (rev 17).
IRQ 5.
Master Capable. Latency=64. Min Gnt=255.Max Lat=255.
I/O at 0xd000 [0xd0ff].
Non-prefetchable 32 bit memory at 0xffcf7c00 [0xffcf7fff].
dmesg
Linux version 2.4.27-speakup (mlang@lexx) (gcc version 3.3.4 (Debian 1:3.3.4-9))
#1 Thu Aug 19 21:46:14 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ee0000 (usable)
BIOS-e820: 0000000007ee0000 - 0000000007ef8000 (ACPI data)
BIOS-e820: 0000000007ef8000 - 0000000007f00000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
126MB LOWMEM available.
On node 0 totalpages: 32480
zone(0): 4096 pages.
zone(1): 28384 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI ) @ 0x000ff8f0
ACPI: RSDT (v001 GATEWA N0CPP012 0x20010419 AMI 0x00000097) @ 0x07ef0000
ACPI: FADT (v001 GATEWA N0CPP012 0x20010419 AMI 0x00000097) @ 0x07ef1000
ACPI: DBGP (v001 GATEWA AMI 0x20010419 AMI 0x00000097) @ 0x07ef5000
ACPI: DSDT (v001 GATEWA N0CPP012 0x00000009 MSFT 0x0100000c) @ 0x00000000
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hdc=ide-scsi ide=nodma id
e2=0xdc00,0xdc02,10 ide3=0xd880,0xd882,10
Found and enabled local APIC!
Initializing CPU#0
Detected 634.468 MHz processor.
Speakup v-2.00 CVS: Wed Apr 14 16:23:30 EDT 2004 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 1264.84 BogoMIPS
Memory: 122340k/129920k available (1092k kernel code, 7192k reserved, 482k data,
96k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 634.4382 MHz.
..... host bus clock speed is 66.7828 MHz.
cpu: 0, clocks: 667828, slice: 333914
CPU0<T0:667824,T1:333904,D:6,S:333914,C:667828>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfdba1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801AA PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2410] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_I
RQ SERIAL_PCI enabled
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
done.
Freeing initrd memory: 3820k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
hda: ST310014A, ATA DISK drive
hdc: GENERIC DVD DUAL 4XMax, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Journalled Block Device driver loaded
hda: attached ide-disk driver.
hda: 20005650 sectors (10243 MB) w/2048KiB Cache, CHS=19846/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 < p5 >
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 441748k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache
Uniform CD-ROM driver Revision: 3.12
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Found IRQ 5 for device 01:03.0
PCI: Sharing IRQ 5 with 00:1f.2
tulip0: MII transceiver #1 config 3000 status 786d advertising 01e1.
eth0: ADMtek Comet rev 17 at 0xd000, 00:04:5A:46:62:E0, IRQ 5.
device-mapper: 4.1.1-ioctl (2004-04-07) initialised: dm-devel@redhat.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 93M
agpgart: Detected an Intel i810 E Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
i810_rng: RNG not detected
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 22:18:33 Aug 19 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:1f.2
PCI: Sharing IRQ 5 with 01:03.0
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xe880, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1f.2-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:1f.2-2.4, assigned address 3
usb.c: USB device 3 (vend/prod 0xd3d/0x1) is not claimed by any active driver.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
i810_rng: RNG not detected
hw_random: RNG not detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.00 Keyboard [USBPS2] on usb1:3.0
input: USB HID v1.00 Mouse [USBPS2] on usb1:3.1
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
lp: driver loaded but no devices found
lspci
0000:00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory Controller Hub] (rev 03)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
0000:01:02.0 Unknown mass storage controller: Promise Technology, Inc. 20269 (rev 02)
0000:01:03.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)