Part of Slepp's ProjectsPastebinTURLImagebinFilebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate
Sign In | Create Account

dmesg
Wednesday, August 9th, 2006 at 3:37:05pm UTC 

  1. Bootdata ok (command line is root=/dev/sda1 resume2=/dev/sda2)
  2. Linux version 2.6.17-suspend2-r3 (root@mythbox) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #4 Mon Aug 7 22:22:54 CEST 2006
  3. BIOS-provided physical RAM map:
  4.  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  5.  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  6.  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  7.  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
  8.  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
  9.  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
  10.  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  11.  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  12. DMI 2.3 present.
  13. ACPI: RSDP (v000 Nvidia                                ) @ 0x00000000000f7560
  14. ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
  15. ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0
  16. ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9880
  17. ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff97c0
  18. ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
  19. On node 0 totalpages: 257155
  20.   DMA zone: 2650 pages, LIFO batch:0
  21.   DMA32 zone: 254505 pages, LIFO batch:31
  22. Nvidia board detected. Ignoring ACPI timer override.
  23. ACPI: PM-Timer IO Port: 0x4008
  24. ACPI: Local APIC address 0xfee00000
  25. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  26. Processor #0 15:15 APIC version 16
  27. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
  28. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  29. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  30. ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  31. IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
  32. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  33. ACPI: BIOS IRQ0 pin2 override ignored.
  34. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  35. ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  36. ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
  37. ACPI: IRQ9 used by override.
  38. ACPI: IRQ14 used by override.
  39. ACPI: IRQ15 used by override.
  40. Setting APIC routing to flat
  41. Using ACPI (MADT) for SMP configuration information
  42. Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
  43. Checking aperture...
  44. CPU 0: aperture @ 150000000 size 32 MB
  45. Aperture from northbridge cpu 0 too small (32 MB)
  46. No AGP bridge found
  47. Built 1 zonelists
  48. Kernel command line: root=/dev/sda1 resume2=/dev/sda2
  49. Initializing CPU#0
  50. PID hash table entries: 4096 (order: 12, 32768 bytes)
  51. time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
  52. time.c: Detected 2211.352 MHz processor.
  53. Console: colour VGA+ 80x25
  54. Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  55. Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  56. Memory: 1026384k/1048512k available (2163k kernel code, 21360k reserved, 1214k data, 168k init)
  57. Calibrating delay using timer specific routine.. 4425.32 BogoMIPS (lpj=8850659)
  58. Mount-cache hash table entries: 256
  59. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  60. CPU: L2 Cache: 512K (64 bytes/line)
  61. CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 02
  62. Using local APIC timer interrupts.
  63. result 12564521
  64. Detected 12.564 MHz APIC timer.
  65. testing NMI watchdog ... OK.
  66. NET: Registered protocol family 16
  67. ACPI: bus type pci registered
  68. PCI: Using MMCONFIG at e0000000
  69. PCI: No mmconfig possible on device 0:18
  70. ACPI: Subsystem revision 20060127
  71. ACPI: Interpreter enabled
  72. ACPI: Using IOAPIC for interrupt routing
  73. ACPI: PCI Root Bridge [PCI0] (0000:00)
  74. PCI: Probing PCI hardware (bus 00)
  75. PCI: Transparent bridge - 0000:00:09.0
  76. Boot video device is 0000:01:00.0
  77. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  78. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  79. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  80. ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
  81. ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
  82. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  83. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  84. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  85. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  86. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  87. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  88. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  89. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  90. ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
  91. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  92. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  93. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  94. ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  95. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
  96. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
  97. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
  98. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
  99. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
  100. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
  101. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
  102. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
  103. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
  104. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
  105. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
  106. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
  107. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
  108. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
  109. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
  110. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
  111. Linux Plug and Play Support v0.97 (c) Adam Belay
  112. pnp: PnP ACPI init
  113. pnp: PnP ACPI: found 15 devices
  114. SCSI subsystem initialized
  115. usbcore: registered new driver usbfs
  116. usbcore: registered new driver hub
  117. PCI: Using ACPI for IRQ routing
  118. PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  119. PCI-DMA: Disabling IOMMU.
  120. pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
  121. pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
  122. pnp: 00:01: ioport range 0x4400-0x447f has been reserved
  123. pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
  124. pnp: 00:01: ioport range 0x4800-0x487f has been reserved
  125. pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
  126. PCI: Bridge: 0000:00:09.0
  127.   IO window: disabled.
  128.   MEM window: d3000000-d30fffff
  129.   PREFETCH window: disabled.
  130. PCI: Bridge: 0000:00:0b.0
  131.   IO window: disabled.
  132.   MEM window: disabled.
  133.   PREFETCH window: disabled.
  134. PCI: Bridge: 0000:00:0c.0
  135.   IO window: disabled.
  136.   MEM window: disabled.
  137.   PREFETCH window: disabled.
  138. PCI: Bridge: 0000:00:0d.0
  139.   IO window: disabled.
  140.   MEM window: disabled.
  141.   PREFETCH window: disabled.
  142. PCI: Bridge: 0000:00:0e.0
  143.   IO window: disabled.
  144.   MEM window: d0000000-d2ffffff
  145.   PREFETCH window: c0000000-cfffffff
  146. PCI: Setting latency timer of device 0000:00:09.0 to 64
  147. PCI: Setting latency timer of device 0000:00:0b.0 to 64
  148. PCI: Setting latency timer of device 0000:00:0c.0 to 64
  149. PCI: Setting latency timer of device 0000:00:0d.0 to 64
  150. PCI: Setting latency timer of device 0000:00:0e.0 to 64
  151. NET: Registered protocol family 2
  152. IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
  153. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  154. TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  155. TCP: Hash tables configured (established 131072 bind 65536)
  156. TCP reno registered
  157. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
  158. Initializing Cryptographic API
  159. io scheduler noop registered
  160. io scheduler cfq registered (default)
  161. PCI: Setting latency timer of device 0000:00:0b.0 to 64
  162. pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
  163. assign_interrupt_mode Found MSI capability
  164. Allocate Port Service[0000:00:0b.0:pcie00]
  165. Allocate Port Service[0000:00:0b.0:pcie03]
  166. PCI: Setting latency timer of device 0000:00:0c.0 to 64
  167. pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
  168. assign_interrupt_mode Found MSI capability
  169. Allocate Port Service[0000:00:0c.0:pcie00]
  170. Allocate Port Service[0000:00:0c.0:pcie03]
  171. PCI: Setting latency timer of device 0000:00:0d.0 to 64
  172. pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
  173. assign_interrupt_mode Found MSI capability
  174. Allocate Port Service[0000:00:0d.0:pcie00]
  175. Allocate Port Service[0000:00:0d.0:pcie03]
  176. PCI: Setting latency timer of device 0000:00:0e.0 to 64
  177. pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
  178. assign_interrupt_mode Found MSI capability
  179. Allocate Port Service[0000:00:0e.0:pcie00]
  180. Allocate Port Service[0000:00:0e.0:pcie03]
  181. Real Time Clock Driver v1.12ac
  182. Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
  183. Linux agpgart interface v0.101 (c) Dave Jones
  184. ACPI: Power Button (FF) [PWRF]
  185. ACPI: Power Button (CM) [PWRB]
  186. ACPI: Fan [FAN] (on)
  187. ACPI: Thermal Zone [THRM] (40 C)
  188. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  189. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  190. 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  191. parport: PnPBIOS parport detected.
  192. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
  193. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  194. serio: i8042 AUX port at 0x60,0x64 irq 12
  195. serio: i8042 KBD port at 0x60,0x64 irq 1
  196. mice: PS/2 mouse device common for all mice
  197. loop: loaded (max 8 devices)
  198. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
  199. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
  200. GSI 16 sharing vector 0xD9 and IRQ 16
  201. ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
  202. PCI: Setting latency timer of device 0000:00:0a.0 to 64
  203. forcedeth: using HIGHDMA
  204. input: AT Translated Set 2 keyboard as /class/input/input0
  205. eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
  206. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  207. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  208. NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
  209. NFORCE-CK804: chipset revision 242
  210. NFORCE-CK804: not 100% native mode: will probe irqs later
  211. NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
  212.     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
  213.     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
  214. Probing IDE interface ide0...
  215. input: PS/2 Generic Mouse as /class/input/input1
  216. hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
  217. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  218. Probing IDE interface ide1...
  219. Probing IDE interface ide1...
  220. hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
  221. Uniform CD-ROM driver Revision: 3.20
  222. libata version 1.20 loaded.
  223. sata_nv 0000:00:07.0: version 0.8
  224. ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
  225. GSI 17 sharing vector 0xE1 and IRQ 17
  226. ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 225
  227. PCI: Setting latency timer of device 0000:00:07.0 to 64
  228. ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 225
  229. ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 225
  230. ata1: SATA link up 1.5 Gbps (SStatus 113)
  231. ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
  232. ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
  233. nv_sata: Primary device added
  234. nv_sata: Primary device removed
  235. nv_sata: Secondary device added
  236. nv_sata: Secondary device removed
  237. ata1: dev 0 configured for UDMA/133
  238. scsi0 : sata_nv
  239. ata2: SATA link down (SStatus 0)
  240. scsi1 : sata_nv
  241.   Vendor: ATA       Model: ST3250620AS       Rev: 3.AA
  242.   Type:   Direct-Access                      ANSI SCSI revision: 05
  243. ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
  244. GSI 18 sharing vector 0xE9 and IRQ 18
  245. ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 233
  246. PCI: Setting latency timer of device 0000:00:08.0 to 64
  247. ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 233
  248. ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 233
  249. ata3: SATA link down (SStatus 0)
  250. scsi2 : sata_nv
  251. ata4: SATA link down (SStatus 0)
  252. scsi3 : sata_nv
  253. SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
  254. sda: Write Protect is off
  255. sda: Mode Sense: 00 3a 00 00
  256. SCSI device sda: drive cache: write back
  257. SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
  258. sda: Write Protect is off
  259. sda: Mode Sense: 00 3a 00 00
  260. SCSI device sda: drive cache: write back
  261.  sda: sda1 sda2
  262. sd 0:0:0:0: Attached scsi disk sda
  263. ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
  264. GSI 19 sharing vector 0x32 and IRQ 19
  265. ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50
  266. PCI: Setting latency timer of device 0000:00:02.1 to 64
  267. ehci_hcd 0000:00:02.1: EHCI Host Controller
  268. ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
  269. ehci_hcd 0000:00:02.1: debug port 1
  270. PCI: cache line size of 64 is not supported by device 0000:00:02.1
  271. ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000
  272. ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  273. usb usb1: configuration #1 chosen from 1 choice
  274. hub 1-0:1.0: USB hub found
  275. hub 1-0:1.0: 10 ports detected
  276. ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  277. ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
  278. ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 217
  279. PCI: Setting latency timer of device 0000:00:02.0 to 64
  280. ohci_hcd 0000:00:02.0: OHCI Host Controller
  281. ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  282. ohci_hcd 0000:00:02.0: irq 217, io mem 0xd3104000
  283. usb usb2: configuration #1 chosen from 1 choice
  284. hub 2-0:1.0: USB hub found
  285. hub 2-0:1.0: 10 ports detected
  286. USB Universal Host Controller Interface driver v3.0
  287. Initializing USB Mass Storage driver...
  288. usbcore: registered new driver usb-storage
  289. USB Mass Storage support registered.
  290. usbcore: registered new driver usbhid
  291. drivers/usb/input/hid-core.c: v2.6:USB HID core driver
  292. I2O subsystem v1.325
  293. i2o: max drivers = 8
  294. i2c /dev entries driver
  295. i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
  296. i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
  297. Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
  298. ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
  299. ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
  300. PCI: Setting latency timer of device 0000:00:04.0 to 64
  301. intel8x0_measure_ac97_clock: measured 54704 usecs
  302. intel8x0: clocking to 46889
  303. ALSA device list:
  304.   #0: NVidia CK804 with ALC850 at 0xd3103000, irq 225
  305. TCP bic registered
  306. NET: Registered protocol family 1
  307. NET: Registered protocol family 17
  308. powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
  309. powernow-k8: BIOS error - no PSB or ACPI _PSS objects
  310. Suspend2 Core.
  311. Suspend2 Compression Driver loading.
  312. Suspend2 Encryption Driver loading.
  313. Suspend2 Swap Writer loading.
  314. Suspend2 2.2.7: Swapwriter: Signature found.
  315. Suspend2 2.2.7: Resuming enabled.
  316. ReiserFS: sda1: found reiserfs format "3.6" with standard journal
  317. ReiserFS: sda1: using ordered data mode
  318. ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  319. ReiserFS: sda1: checking transaction log (sda1)
  320. ReiserFS: sda1: Using r5 hash to sort names
  321. VFS: Mounted root (reiserfs filesystem) readonly.
  322. Freeing unused kernel memory: 168k freed
  323. Adding 1518132k swap on /dev/sda2.  Priority:-1 extents:1 across:1518132k
  324. nvidia: module license 'NVIDIA' taints kernel.
  325. ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
  326. GSI 20 sharing vector 0x3A and IRQ 20
  327. ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58
  328. PCI: Setting latency timer of device 0000:01:00.0 to 64
  329. NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-8762  Mon May 15 13:58:14 PDT 2006
  330. Linux video capture interface: v2.00
  331. saa7130/34: v4l2 driver version 0.2.14 loaded
  332. ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
  333. GSI 21 sharing vector 0x42 and IRQ 21
  334. ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 66
  335. saa7130[0]: found at 0000:05:06.0, rev: 1, irq: 66, latency: 32, mmio: 0xd3000000
  336. saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T300 [card=70,insmod option]
  337. saa7130[0]: board init: gpio is 843f00
  338. input: saa7134 IR (Compro Videomate DV as /class/input/input2
  339. saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
  340. saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
  341. saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff
  342. saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  343. saa7130[0]: i2c eeprom 40: ff 02 00 c2 86 10 ff ff ff ff ff ff ff ff ff ff
  344. saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
  345. saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  346. saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  347. saa7130[0]: registered device video0 [v4l2]
  348. saa7130[0]: registered device vbi0
  349. ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
  350. GSI 22 sharing vector 0x4A and IRQ 22
  351. ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 74
  352. saa7130[1]: found at 0000:05:07.0, rev: 1, irq: 74, latency: 32, mmio: 0xd3001000
  353. saa7130[1]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected]
  354. saa7130[1]: board init: gpio is 843f00
  355. input: saa7134 IR (Compro Videomate DV as /class/input/input3
  356. saa7130[1]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
  357. saa7130[1]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
  358. saa7130[1]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff
  359. saa7130[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  360. saa7130[1]: i2c eeprom 40: ff 02 00 c2 86 10 ff ff ff ff ff ff ff ff ff ff
  361. saa7130[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
  362. saa7130[1]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  363. saa7130[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  364. saa7130[1]: registered device video1 [v4l2]
  365. saa7130[1]: registered device vbi1
  366. DVB: registering new adapter (saa7130[0]).
  367. DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
  368. DVB: registering new adapter (saa7130[1]).
  369. DVB: registering frontend 1 (Philips TDA10046H DVB-T)...
  370. saa7134 ALSA driver for DMA sound loaded
  371. saa7130[0]/alsa: saa7130[0] at 0xd3000000 irq 66 registered as card 1
  372. saa7130[1]/alsa: saa7130[1] at 0xd3001000 irq 74 registered as card 2

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will expire by default in one month. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right
worth-right
worth-right